7732 replies to this topic

[Nathan Foxbane]

Odanan, on 05 May 2015 - 06:53 PM, said:

Wow!!! This is much better!! Is it the special geometry of the definitive version?

The head is everything we wanted!

Where did you find it?

It is. They have updated the Resistance II page. Only the Black Knight does not have a large version of the new R geometry.

[Bloodweaver]

It's on the Resistance 2 ordering page. The special heometries are a HUGE improvement from those on the first set of Resistance 'Mechs.

In fact, these are BY FAR the best special geometries we've seen, on any 'Mechs.

Edited by Bloodweaver, 05 May 2015 - 07:06 PM.

[Odanan]

Jesus Christ! Looks at that Black Knight!

[Bloodweaver]

Nathan Foxbane, on 05 May 2015 - 06:58 PM, said:

Only the Black Knight does not have a large version of the new R geometry.

Check again?

[Nathan Foxbane]

Bloodweaver, on 05 May 2015 - 07:05 PM, said:

Check again?

That is the standard geometry.

THIS is the R geometry.

Edited by Nathan Foxbane, 05 May 2015 - 07:09 PM.

[Odanan]

Nathan Foxbane, on 05 May 2015 - 07:07 PM, said:

That is the standard geometry.

THIS is the R geometry.

You need to refresh you browser page, man.

Ctrl + F5 should do the trick.

[Nathan Foxbane]

Odanan, on 05 May 2015 - 07:16 PM, said:

You need to refresh you browser page, man.

Ctrl + F5 should do the trick.

Of course they fix it just as I posted instead of over an hour ago. >

[Odanan]

It is cool to see the two Wolfhound head types debuting in the game.

The standard is like this one:

And the R is like this one;


Now if you excuse me, I will review my Grinner.

[CaptNapalm]

The House Liao Gatekeepers continue the push into New Avalon:



http://houseliao.blo...atekeepers.html

[ChapeL]

That's like... high fantasy... what's next elven armored battlemechs ?

( I kid I kid, nice job )

[Alistair Winter]

A little request, from one artist to another

Could we see the standard and Resistance versions of Resistance 2 pack mechs side by side, for the sake of comparison? PGI seems to have removed all the artwork of standard versions, and they can't be found in the Gallery either.

Also, could I have the Resistance 2 mechs (Mauler, Wolfhound) painted up like the Battletech cartoon, with the Awesome 9M? Pretty please? With Somerset Strikers fist logo on?



Also, also can anyone identify the mech on the upper left?

Edited by Alistair Winter, 05 May 2015 - 10:18 PM.

[Tiamat of the Sea]

Sparks Murphey, on 22 February 2015 - 03:55 AM, said:

As a Quickdraw pilot with my name who is a Skye Ranger, I highly appreciate this.

[Nightshade24]

Alistair Winter, on 05 May 2015 - 09:59 PM, said:

A little request, from one artist to another

Could we see the standard and Resistance versions of Resistance 2 pack mechs side by side, for the sake of comparison? PGI seems to have removed all the artwork of standard versions, and they can't be found in the Gallery either.

Also, could I have the Resistance 2 mechs (Mauler, Wolfhound) painted up like the Battletech cartoon, with the Awesome 9M? Pretty please? With Somerset Strikers fist logo on?



Also, also can anyone identify the mech on the upper left?

The mech on the upper left? that would be the rear of the Mauler which you also see in the lower right...

Oh wait, you didn't mean mech do you? that is a battlearmour, it's name is Infiltrator, it is an Inner sphere battle armour first made in 3050 by the Federation Commonwealth. (Stiener - Davion.)


It.s 0.75 tons and only weapon is a grenade launcher and has "stealth armour" instead of standard or Ferro Fibrous.
(btw I know the picture I posted is a chicken walker but it is in fact the same mech, as listed in the source booklet)




Also note on skins: why not make this in a special package around 30 dollars to have a special summerset strikers version of the Awesome, Mauler, centurion, wolfhound, etc? just the special versions with new fancy camo instead of a pack that contains additional variants and such.

[Alistair Winter]

Nightshade24, on 06 May 2015 - 01:09 AM, said:

The mech on the upper left? that would be the rear of the Mauler which you also see in the lower right...
Oh wait, you didn't mean mech do you? that is a battlearmour, it's name is Infiltrator, it is an Inner sphere battle armour first made in 3050 by the Federation Commonwealth. (Stiener - Davion.)
It.s 0.75 tons and only weapon is a grenade launcher and has "stealth armour" instead of standard or Ferro Fibrous.
(btw I know the picture I posted is a chicken walker but it is in fact the same mech, as listed in the source booklet)

But in the cartoon, that thing is portrayed as a huge mech, not battle armour. It towers above the four-legged walker, it looks like it's 15 meters tall. If it was supposed to be the Infiltrator, then they really got the scale wrong.

EDIT: Never mind. I was wrong. That four-legged walker was actually smaller than a VW Beetle.
Thanks for the clarification.

Nightshade24, on 06 May 2015 - 01:09 AM, said:

Also note on skins: why not make this in a special package around 30 dollars to have a special summerset strikers version of the Awesome, Mauler, centurion, wolfhound, etc? just the special versions with new fancy camo instead of a pack that contains additional variants and such.

When they give us Decals, I'll just put the Striker symbol on my mechs and paint them as similar as the cartoon version as possible. But yeah, I might be convinced to pay for a special skin package. I'm not sure it would be a good sale for PGI though.

Edited by Alistair Winter, 06 May 2015 - 01:39 AM.

[Nightshade24]

Alistair Winter, on 06 May 2015 - 01:37 AM, said:

But in the cartoon, that thing is portrayed as a huge mech, not battle armour. It towers above the four-legged walker, it looks like it's 15 meters tall. If it was supposed to be the Infiltrator, then they really got the scale wrong.

EDIT: Never mind. I was wrong. That four-legged walker was actually smaller than a VW Beetle.
Thanks for the clarification.


When they give us Decals, I'll just put the Striker symbol on my mechs and paint them as similar as the cartoon version as possible. But yeah, I might be convinced to pay for a special skin package. I'm not sure it would be a good sale for PGI though.

It would also come with premium versions of those mechs and the Awesome you see is a special modification (aka a HERO mech)

The AWS-9Ma (a for Adamn Steiner) is modifide of the Awesome 8Q, it removed the pulse lasers and put the small laser back as well as putting an ECM and Command console on and 2 tons of advance comms stuff (would be replaced with more normal equipments I guess and will have quirks to reflect sensor range and stuff), the small laser is in the left arm btw and has DHS stock

so no head hardpoint for E but now you got a hardpoint for both arms instead of just one.

Meaning you can make something like the Awesome 9Q.
hardpoints being 2 each arm 1 each torso. The 1 less E hardpoint is to subsitute for ECM (better not make it OP am I right? would suck with a 'paywall' ) etc.

Pretty nifty son of a gun if you ask me.

The rest will also get a hero bonus or champion mech- effect but will have custom skins. this pack may include the SSS' insignia as well.

BTW the 4 legged battlearmour (sloth) is another battle armour and due to it's profile it's even smaller =P
2 small lasers and 1 pop up mine. 1.5 ton battlearmour

Edited by Nightshade24, 06 May 2015 - 02:17 AM.

[Uncle Totty]

Odanan, on 05 May 2015 - 07:22 PM, said:

It is cool to see the two Wolfhound head types debuting in the game.

The standard is like this one:

And the R is like this one;


Now if you excuse me, I will review my Grinner.

*squeals*

[Odanan]

Reviewed Wolfhound "Grinner":

"Now with more teeth"

[Odanan]

Alistair Winter, on 05 May 2015 - 09:59 PM, said:

A little request, from one artist to another

Could we see the standard and Resistance versions of Resistance 2 pack mechs side by side, for the sake of comparison? PGI seems to have removed all the artwork of standard versions, and they can't be found in the Gallery either.

Also, could I have the Resistance 2 mechs (Mauler, Wolfhound) painted up like the Battletech cartoon, with the Awesome 9M? Pretty please? With Somerset Strikers fist logo on?



Also, also can anyone identify the mech on the upper left?

Hmmmm.. interesting...

[ChapeL]

Anyone else feels the new resistance Crab belongs in a "WAAAGH" ? Looks like a ride an Ork would be proud off.

[Odanan]

BTW, the R Crab looks like a Star Wars ship salvaged by WH40K Orks... I like it!

ChapeL, on 06 May 2015 - 06:07 AM, said:

Anyone else feels the new resistance Crab belongs in a "WAAAGH" ? Looks like a ride an Ork would be proud off.

Hey! ninjaed me!