30 replies to this topic

[OffshoreSHO]

Tarl Cabot, on 11 October 2018 - 02:12 PM, said:

What GPU?
System's Power Options set to High Performance?
And game settings, including what AA, if any is being used?

I'm using a 1080ti

Power is currently set a High Performance.

Graphic Settings are All High including AA is on but when i reduce all my graphic settings to LOWest i still get bad FPS but i kept the resolution at 2560x1080p

Edited by OffshoreSHO, 11 October 2018 - 07:48 PM.

[Scout Derek]

Hijacking this thread for a moment to post I rig I will be putting together soon.

https://pcpartpicker.com/list/dQBWw6

I would like to know the weak point in this rig If I ever wanted to play MWO on it. I'm assuming it'll be the Ryzen CPU due to optimization issues.

Edited by Scout Derek, 28 November 2018 - 05:56 PM.

[Internal Obedience XIII-omega]

Scout Derek, on 28 November 2018 - 05:56 PM, said:

Hijacking this thread for a moment to post I rig I will be putting together soon.

https://pcpartpicker.com/list/dQBWw6

I would like to know the weak point in this rig If I ever wanted to play MWO on it. I'm assuming it'll be the Ryzen CPU due to optimization issues.

Just a personal preference, i would use MSi MB, better rating too.
https://www.newegg.c...ID=3938566&SID=

EDIT:
I would have done something like this if the budget is under 1k.
https://pcpartpicker.com/list/ybvMKB

Edited by Internal Obedience XIII-omega, 29 November 2018 - 03:25 PM.

[Scout Derek]

Internal Obedience XIII-omega, on 29 November 2018 - 02:59 PM, said:

Just a personal preference, i would use MSi MB, better rating too.
https://www.newegg.c...ID=3938566&SID=

EDIT:
I would have done something like this if the budget is under 1k.
https://pcpartpicker.com/list/ybvMKB

It was under 850.

The parts at the time were cheaper, particularly the RAM and Motherboard. Those two in total we're 50-70USD cheaper than what they are now.

Also I'm not sure why you chose RGB RAM.... I really have no need for flashy components to be honest.

[Tarl Cabot]

I havent but double check that the ram is certified? for the motherboard. If it is not it will be difficult to the ram at or near its highest rating. From the threads this is more important for Ryzen than for Intel CPU.

[Internal Obedience XIII-omega]

Scout Derek, on 30 November 2018 - 01:22 AM, said:

It was under 850.

The parts at the time were cheaper, particularly the RAM and Motherboard. Those two in total we're 50-70USD cheaper than what they are now.

Also I'm not sure why you chose RGB RAM.... I really have no need for flashy components to be honest.

Fair enough, out with the flashy it is!

https://pcpartpicker.com/list/f6pXpG

[Alexandra Hekmatyar]

Honestly it's not your hardware it's the fracking Cryengine.
Just hope that MW5 comes out and that they transfer MWO there.

[valrond]

It's not the CPU. I have used an i5 2500k @ 4.5, 3570k @ 4.2, 4700HQ (mobile) @ 3.4, as well as my Ryzen 1700x and a combination of GPUs, from dual GTX 480, to R9 290x, and now GTX 1080 and 1080 Ti. It doesn't matter what I play with, the game will go down to 40 fps or even lower whenever it wants. As they previous poster said, it's fricking Cryengine. It is that bad. I get better performance in a modern AAA game than in this one. Only other game that performs as bad is World of Warships.

[Warning incoming Humble Dexterer]

Well if you can't get 60 FPS out of a GTX 1080 and high end CPU, don't bother trying...

But sometimes you just need to reduce the right video setting, such as the quality of the shadows (every tree, mech, rock, building has a shadow...), to achieve good results for a small quality cost.

Try putting everything on max on a demanding scene (Solaris Map, vast open forest...), and lower one setting to min at a time, to find out which setting(s) impact performance the most, and which settings can be left on max.

Like if having too many mechs displayed is an issue, then lowering the quality of the mechs is a solution.

Edited by Humble Dexter, 02 December 2018 - 12:38 AM.

[Jimmy the Jim Jimmies]

R5 1600, OC'd to 3.8GHz at 1.25V.
B350 Tomahawk
GTX1070
16GB DDR4-2400 CL17, OC'd to 3200 CL18

Settings:
- 1080p
- medium for shadows
- medium post-processing
- max everything else

Runs most maps around 90 fps.
Some spots on River City and Solaris City dip to 50-ish fps though.

I tried running the game at 1440p but it drops below 60 fps a tad too often. By setting everything on medium, the fps go back up to around 90.
At 720p it runs well over 120+ fps.

I can OC the R5 1600 it to 4GHz at 1.375V but then my cooler (NH-D15) has to work around 70% to keep it under 60 degrees. I occasionally get stutters which leads me to believe there's something "wrong" with my OC or at least something's not optimal about it. It's very rare but I prefer the stability and silence of my 3.8GHz OC.
It could be the RAM that can't keep up. I'll be buying faster RAM at some point, and try this again.
I can OC the R5 1600 it to 4GHz at 1.375V but then my cooler (NH-D15) has to work around 70% to keep it under 60 degrees. I occasionally get stutters which leads me to believe there's something "wrong" with my OC or at least it's not optimal. I'll be buying faster RAM at some point, and try this again.
I have to try with SMT disabled. But I like all the threads. I often play with streamers or with multiple browsers open and the processor can handle it without breaking a sweat

[mechkearney]

You all need to play round with your system. My system gets about 59 FPS consistently

• Ryzen 1300X 3.4 GHz (not overclocked)
  
• 16 GB TridentZ RGB LED RAM
  
• ASRock Mini ITX AB350
  
• XFX 4GB RX 560
  
• Samsung EVO 256 GB SSD

Everything is stock, but I've changed the game settings in MWO

• resolution: 1920x1080
  
• Fullscreen
  
• DX11
  
• Motion blur off
  
• V-Sync On
  
• Damage glow on
  
• effects very high
  
• object detail very high
  
• particles low
  
• post processing high
  
• shading very high
  
• shadows medium
  
• texturing very high
  
• environment low
  
• anti-aliasing POSTAA

And then I use Radeon settings to override the game's aliasing mode

• Anti-Aliasing: override apps settings
  
• anti-aliasing level: 2xEQ
  
• anti-aliasing method: mutlisampling
  
• morphological filtering: off
  
• texture quality standard

I'll try to upload screenshots, but, yeah, 59-60 FPS

Edited by mechkearney, 14 June 2019 - 10:18 PM.