Jump to content

Performance & Connectivity Feedback - 1.2.257

Started by Kyle Polulak, Dec 17 2013 10:14 AM

71 replies to this topic

#1 Kyle Polulak

    <member/>

  • Overlord
  • Overlord
  • 584 posts
  • LocationVancouver, BC

Posted 17 December 2013 - 10:14 AM

Low Framerate? Tell us about it here!

Please attempt to respond to the following questions in your responses:
  • How had the patch generally affected your performance?
  • Whether there are specific points in the game when your performance changes.
  • What are your video settings, did you change them since last patch?
  • Average FPS ingame and in the menus for previous patch and latest patch (Press F9 to see your FPS)
  • System specs (You can include them in a [spoiler] [ /spoiler])
  • Your advertised internet connection speed / Geographic location

#2 DeeBeeP

    Member

  • PipPipPip
  • Overlord
  • Overlord
  • 66 posts
  • LocationJapan

Posted 17 December 2013 - 12:44 PM

Less than 30fps in MechLab for some reason, very choppy.

Low fps in game when viewing smoke or steam etc. Frame rate takes a dive from 60+ to single digits.

Settings are a combination of High and Very High, haven't changed them in ages.

Average fps is 60+, I normally use vsync.

Spoiler

Edited by DeeBeeP, 17 December 2013 - 12:56 PM.

#3 Corvus Antaka

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Knight Errant
  • Knight Errant
  • 8,310 posts
  • Twitch: Link
  • LocationInner Sphere

Posted 17 December 2013 - 01:27 PM

yes. something is wrong, I've dropped to 30 FPS in mechlab and 15 FPS when switching mechs. mechs are shakey/blurring oddly when rotated in lab as well.

ingame performance is fine.

Edited by Colonel Pada Vinson, 17 December 2013 - 01:36 PM.

#4 Lagit6

    Member

  • PipPipPip
  • The Predator
  • The Predator
  • 58 posts
  • LocationUnited Kingdom

Posted 17 December 2013 - 02:06 PM

Hey,
Was on HPG map and I seem to be having sound problems. It was the testing grounds mode as I wanted a quick look before I went out.
Now before someone says about it meant to be muffled that's fine; however when I go into 3rd person I get no sounds from my Locust 1V at all apart from announcer and lock on etc. Machine guns, medium pulse laser and even the engine have no sound every now and again it will do a beep noise.
Hope this can be fixed. I don't play in 3rd person but this can be a problem for those who do.
Otherwise great patch apart from the pure function call :D

Edit: Same problem with my Hunchback 4SP; still on same map and testing grounds.

Edited by lagit6, 17 December 2013 - 02:22 PM.

#5 Fabian Wrede

    Member

  • PipPipPipPipPipPip
  • 203 posts

Posted 17 December 2013 - 02:33 PM

Game crash every 2-3 games when leaving battle.
Also new game mod is not a good feature at all. its notbalancetogether new spawn ponts.

If I could I would demand all Money back spenton game since founder. Develop mentofgameis goinginteh wrong dirction and no bug thtIhae had have been olved since star ad balance is gettingwores every patch.. Can't see gme surviving aftenw year

#6 D A T A

    Member

  • PipPipPipPipPipPipPip
  • Death Star
  • Death Star
  • 897 posts
  • LocationCasamassima, Bari, south Italy

Posted 17 December 2013 - 02:54 PM

in the mechlab i have 30 less fps, it is very choppy, i have nvidia gtx 770 and intel i7 4770

#7 Greyboots

    Member

  • PipPipPipPipPipPip
  • Liquid Metal
  • Liquid Metal
  • 396 posts

Posted 17 December 2013 - 03:18 PM

I have had a reduction in frame rates but it is minor and does not generally effect play.

However, it's forced me to turn down some graphical detail as I had begun being locked up when under heavy fire. The extra load appears to be effecting my video card's ability to render particles/effects at the previous level.

Reducing particles and effects solved it. Of course I'm not a "hd junkie" so this doesn't worry me so much.

New map: HPG.

This map was the only place i experienced constant performance issues. It's giving anti-aliasing an absolutely horrendous job to do. I've actually turned it off due to this map . This map, by the way, looks absolutely terrible without it due to the waves that appear in various textures. All the others look OK, better with it on of course, but I'm not jumping in and changing settings just because of a certain map.

#8 Thorqemada

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • 6,396 posts

Posted 17 December 2013 - 05:18 PM

It seems the Low-FPS situations have increased by a good margin.
Sound is somewhat strange.
FPS in the Mechlab is almost cut by half (but that is good bcs my GPU runs cooler that way).

(Graphic Settings Very High)

#9 rageagainstthedyingofthelight

    Member

  • PipPipPipPipPipPip
  • Rage
  • Rage
  • 306 posts
  • LocationTerra Therma, shut down

Posted 17 December 2013 - 05:20 PM

The sound is supposed to be like that in HPG, you're in space

#10 Sandpit

    Member

  • PipPipPipPipPipPipPipPipPipPipPipPip
  • Veteran Founder
  • Veteran Founder
  • 17,419 posts
  • Facebook: Link
  • Twitter: Link
  • LocationArkansas

Posted 17 December 2013 - 08:34 PM

My FPS has dropped on average by about 5. I have also been experiencing a lot of rubber banding and lag spikes since the new patch. My ping never seems to jump so I don't think it's a latency or ISP issue.

Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828-1532)
Language: English (Regional Setting: English)
System Manufacturer: Acer
System Model: Aspire 7741
BIOS: Ver 1.00PARTTBL
Processor: Intel® Core™ i5 CPU M 450 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 4096MB RAM
Available OS Memory: 3956MB RAM
Page File: 2638MB used, 5273MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
I'm including the dxdiag as well in hopes that it helps

#11 Grits N Gravy

    Member

  • PipPipPipPipPipPip
  • 287 posts

Posted 17 December 2013 - 09:34 PM

Also only getting 30 FPS in lobby and mech lab use to get 60. It is very choppy. Nivida 560 Ti, driver 314.07

#12 l3elthaz0r

    Member

  • PipPipPipPipPip
  • Giant Helper
  • Giant Helper
  • 133 posts

Posted 18 December 2013 - 08:24 AM

Is anything being done to address the black screen issues that some players are seeing (that seem to be located outside of NA). We've made a lot of reports and noone seems to get a good enough answer or at least have the issue fixed before all threads are wiped out for the next patch release. Been having this black screen disconnect since 12254 and have honestly stopped playing or bothering to get a response since then.

#13 StillRadioactive

    Member

  • PipPipPipPipPipPipPip
  • The 1 Percent
  • The 1 Percent
  • 644 posts
  • LocationAlexandria, VA

Posted 18 December 2013 - 10:59 AM

View PostNiko Snow, on 17 December 2013 - 10:14 AM, said:

[color=#959595]Low Framerate? Tell us about it here![/color]

[color=#959595]Please attempt to respond to the following questions in your responses:[/color]
  • How had the patch generally affected your performance?
  • Whether there are specific points in the game when your performance changes.
  • What are your video settings, did you change them since last patch?
  • Average FPS ingame and in the menus for previous patch and latest patch (Press F9 to see your FPS)
  • System specs (You can include them in a
    Spoiler
  • Your advertised internet connection speed / Geographic location


This patch has caused a massive framerate drop in the opening sequence of the game (the "achieved with CryEngine 3 / NVIDIA / IGP" sequence). The audio and video are now both quite choppy, and I've never had this problem before.

System specs:
[spoiler]
AMD FX-8350 Eight-core processor 4.00GHz
16.0 GB RAM
Windows 8 64-bit
NVIDIA GeForce GTX 660Ti

#14 FallguySoldier

    Member

  • PipPipPipPipPip
  • The Messenger
  • The Messenger
  • 162 posts

Posted 18 December 2013 - 12:40 PM

View PostIL MECHWARRIOR, on 17 December 2013 - 02:54 PM, said:

in the mechlab i have 30 less fps, it is very choppy, i have nvidia gtx 770 and intel i7 4770

View PostGreyboots, on 17 December 2013 - 03:18 PM, said:

I have had a reduction in frame rates but it is minor and does not generally effect play.

[...]

New map: HPG.

This map was the only place i experienced constant performance issues. It's giving anti-aliasing an absolutely horrendous job to do. I've actually turned it off due to this map . This map, by the way, looks absolutely terrible without it due to the waves that appear in various textures. All the others look OK, better with it on of course, but I'm not jumping in and changing settings just because of a certain map.


Exactly what these two guys said.

#15 Bront

    Member

  • PipPipPipPipPipPipPipPipPip
  • Urban Commando
  • Urban Commando
  • 4,212 posts
  • LocationInternet

Posted 18 December 2013 - 08:34 PM

10 FPS hit in game and 30 FPS hit in the menu since the patch, game is nearly unplayable.

I only noticed it after the hotfix, but it's possible it was since the patch.

#16 MADTIGERSr

    Member

  • PipPip
  • 21 posts
  • LocationUS Arkansas

Posted 18 December 2013 - 08:47 PM

was getting 40-60 on med to high settings 144 in lab 90-130 in test map. Now dips to 25 a lot and lags a lot more, 30 in lab .Had to drop to low settings to play. I have 6 core amd black edition 16 g memory gtx 780 asus 144 hz monitor .I should be able to smoke this game. dsl 785 kb up 3 meg down Arkansas.

#17 Flying Judgement

    Member

  • PipPipPipPipPipPip
  • Fire
  • Fire
  • 475 posts
  • LocationUK

Posted 19 December 2013 - 09:47 AM

my mech started to Lag in game when i press a button my mech responded in 2-3 second it went like that for a minute than i crashed.
Than session lost when try to connect to the game.
Never had this issue it started 15 minute ago i dont have any connection performance issue i can start 4 HD video in youtube loading and playing without delay or stop. any page i open is opens up instantly except MWO main page its loading time is around 20-40 second. thx
oh and in Frozen City snow storm i have game breakingly low FPS even worsens when i try heat vision so its out of option. average 10-25 without any action or not looking at mechs 3-8 in action
i have a stable 25-30 in heavy use is 10 -15 on any other map except in different vision modes.

oh one last thing PPC wont register properly on standing still mechs since the new HostStatreWind
thx

#18 DaemonCross

    Rookie

  • Survivor
  • 8 posts

Posted 19 December 2013 - 09:57 AM

PROBLEM/ISSUE: Current Average Latency now @ 500-1000ms (Previously @ 200-250ms)

Region: Asia Pacific

Gameplay Result:
No Hit Detection/Damage for Projectile Weapons Ex. AC, PPC's.

DSL Provider: PLDT
DSL Speed: 6Mbps

Pingtest.net: Line Grade A

Notes:
Tested on other NA Region Based Games... All latency levels at expected normal range - 200-250ms

PC Specs:

CPU: i7 3770
GPU: GTX 670
RAM: 8 Gb

Drivers: All Current

Router: Full DMZ

System Status: Clean

Edited by DaemonCross, 19 December 2013 - 10:05 AM.

#19 Modo44

    Member

  • PipPipPipPipPipPipPipPipPip
  • Bad Company
  • 3,559 posts

Posted 19 December 2013 - 10:03 AM

My FPS went up slightly with this patch. It is not a huge gain, but I see up to 5FPS more on most maps. It is usually between 35 and 45 now whereas it used to dip to 30 pretty often. Frozen City (both versions) remains consistently below 30FPS, and dipping further with heat vision. You really need to fix that map one day. Specs:
Spoiler

Edited by Modo44, 19 December 2013 - 10:12 AM.

#20 paxmortis

    Member

  • PipPipPipPipPipPipPipPip
  • 1,548 posts
  • LocationDortmund, Germany

Posted 19 December 2013 - 10:23 AM

  • How had the patch generally affected your performance?
  • No.
  • Whether there are specific points in the game when your performance changes.
  • No.
  • What are your video settings, did you change them since last patch?
  • Lowest possible setting, all disable at fullscreen 1920x1080
  • Average FPS ingame and in the menus for previous patch and latest patch (Press F9 to see your FPS)
  • max 30 fps, min 10-12 fps in battle, 60 fps in menu and mechlab
  • System specs (You can include them in a [spoiler] [ /spoiler])
Model: HP G5221de / all original except the graphic card. A SAPPHIRE HD 6850 1GB.


Summary: (Spoiler not work for that.)

Quote

--------[ EVEREST Home Edition © 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Version EVEREST v2.20.405
Homepage http://www.lavalys.com/
Report Type Report Wizard
Computer ALFA
Generator paxmortis
Operating System Windows 7 Home Premium Home Edition 6.1.7601
Date 2013-12-19
Time 19:15

--------[ Summary ]-----------------------------------------------------------------------------------------------------
Computer:
Operating System Windows 7 Home Premium Home Edition
OS Service Pack -
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name ALFA
User Name paxmortis

Motherboard:
CPU Type Intel Pentium III Xeon, 2800 MHz
Motherboard Name Unknown
Motherboard Chipset Unknown
System Memory 4096 MB
BIOS Type Unknown

Display:
Video Adapter AMD Radeon HD 6800 Series
Video Adapter AMD Radeon HD 6800 Series
Video Adapter AMD Radeon HD 6800 Series
Video Adapter AMD Radeon HD 6800 Series
Video Adapter AMD Radeon HD 6800 Series
Video Adapter AMD Radeon HD 6800 Series
Monitor PnP-Monitor (Standard) [NoDB] (011TPQJ48492)

Multimedia:
Audio Adapter Lautsprecher (Realtek High Defi

Storage:
IDE Controller Intel® 82801G (ICH7 Familie) Serieller ATA-Speichercontroller - 27DF
IDE Controller Intel® 82801GB/GR/GH (ICH7 Familie) Serieller ATA-Speichercontroller - 27C0
Disk Drive ST31000528AS ATA Device (931 GB, IDE)
Disk Drive Multiple Card Reader USB Device
Optical Drive hp CDDVDW TS-H653R ATA Device
SMART Hard Disks Status OK

Partitions:
C: (NTFS) 478523 MB (241023 MB free)
D: (NTFS) 461311 MB (451059 MB free)
G: (NTFS) 13929 MB (1713 MB free)
Total Size 931.4 GB (677.5 GB free)

Input:
Keyboard HID-Tastatur
Mouse HID-konforme Maus

Network:
Network Adapter Realtek PCIe FE Family Controller (192.168.2.2)

Peripherals:
Printer Canon iP4300
Printer Fax
Printer Microsoft XPS Document Writer
USB1 Controller Intel® 82801G (ICH7-Familie) USB universeller Hostcontroller - 27C8 [NoDB]
USB1 Controller Intel® 82801G (ICH7-Familie) USB universeller Hostcontroller - 27C9 [NoDB]
USB1 Controller Intel® 82801G (ICH7-Familie) USB universeller Hostcontroller - 27CA [NoDB]
USB1 Controller Intel® 82801G (ICH7-Familie) USB universeller Hostcontroller - 27CB [NoDB]
USB2 Controller Intel® 82801G (ICH7-Familie) USB2 erweiterter Hostcontroller - 27CC [NoDB]
USB Device USB-Eingabegerät
USB Device USB-Eingabegerät
USB Device USB-Massenspeichergerät


Detail Report could be sent at request.

  • Your advertised internet connection speed / Geographic location
  • 50 Mbps down / 10 Mbps up / Germany / 120-130 ping

Edited by paxmortis, 19 December 2013 - 10:26 AM.

Back to Archive · Next Unread Topic →


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users