Ac/10 Vs. Lbx Comparison
#101
Posted 27 January 2014 - 09:07 AM
#102
Posted 27 January 2014 - 09:09 AM
lockwoodx, on 27 January 2014 - 09:01 AM, said:
You sir just lost all my respect, for when I was rocking the dual LBX10 HBK-4G build I knew my limitations and was rewarded generously yet you scoffed along with your elitist pals. For shame on you.
Honestly haven't seen Joe hanging with the Elitists too often. Am...intrigued and a little scared by the concept of your build Details?
SaltBeef, on 27 January 2014 - 09:07 AM, said:
never really understood how a mech with dozens of little hole punched thru it was somehow better salvage than one with a few bigger ones?
Ever see a car with a couple of bullet holes in it? How about one with a few shotgun blasts?
Not sure I ever got mechcommanders logic on that one.
#103
Posted 27 January 2014 - 09:12 AM
Edited by SaltBeef, 27 January 2014 - 09:19 AM.
#104
Posted 27 January 2014 - 09:16 AM
Joseph Mallan, on 27 January 2014 - 09:00 AM, said:
http://mwo.smurfy-ne...21c2887d2c42d31
Two different playstyles - the twin lb 10x one i mean
http://mwo.smurfy-ne...9be92c6e6e1f0da
on topic
honestly it seems that the LB 10x is bad because you are spreading that damage around
Lots of damage - can't take a torso out as fast but spread it all over - do allot of damage on scoreboard
While the AC 10 does all the damage in one spot thats really the thing that makes or breaks it
Edited by kesuga7, 27 January 2014 - 09:19 AM.
#105
Posted 27 January 2014 - 09:19 AM
lockwoodx, on 27 January 2014 - 09:01 AM, said:
You sir just lost all my respect, for when I was rocking the dual LBX10 HBK-4G build I knew my limitations and was rewarded generously yet you scoffed along with your elitist pals. For shame on you.
If I said I didn't like your Mech It was due to my distaste for how the LB-X functions, not your using it. But please refresh me by quoting what I posted. As to being Elite... That is only a badge PGI gave me for pre ordering MW:O! I do not believe you will ever find me outright insulting a player for his ride. I may say I would not use that build and why, but I don't insult player's preference.
#106
Posted 27 January 2014 - 09:26 AM
Bishop Steiner, on 27 January 2014 - 09:09 AM, said:
never really understood how a mech with dozens of little hole punched thru it was somehow better salvage than one with a few bigger ones?
Ever see a car with a couple of bullet holes in it? How about one with a few shotgun blasts?
Not sure I ever got mechcommanders logic on that one.
Think of it as shooting a fat 9mm round that goes through the outer door panel skin but not the internal crumple zone. Not a .308 that goes all the way through and out the other side. LBX is arse backwards in this game. They were surposed to be good at shredding armor but not killing internals. AC10 like the .308 round pierces armor and damages internals making mech less salvageable.
Edited by SaltBeef, 27 January 2014 - 09:32 AM.
#107
Posted 27 January 2014 - 09:35 AM
SaltBeef, on 27 January 2014 - 09:26 AM, said:
Every pellet that Hit Structure could get a crit, Just like a lucky pellet could go though your eye if shot with buckshot or a Glazer round to the face!
#108
Posted 27 January 2014 - 09:48 AM
1. They sounds cool
2. They light up the mech you hit, and looks cool as they come out and smash into your target..
3. They make a really big splash effect when you shoot the water.
Not to mention I love dual LBX on my Jager. It's just so much fun!
#109
Posted 27 January 2014 - 09:57 AM
The point of this game, like every other activity, competition, and sport ( see here ), is to have fun. But, if winning a high percentage of the time and killing more often than you're killed is your primary path to having fun, then you need to put away the dilusions of all weapons being viable and stick to what gets the job done the fastest. So, in summation, there is a time for fun (use what you want) and a time to get the job done the best possible way (not everything is created equal).
#110
Posted 27 January 2014 - 10:00 AM
Bishop Steiner, on 27 January 2014 - 08:45 AM, said:
http://mwomercs.com/...b-10x-proposal/
I'd like the cluster shot for the LB-10/X to work this way, but more importantly, I want the ability to fire standard munitions from the thing. That's actually make the thing worth the 800,000 c-bills they're charging us for it.
As for the OP's build I go for something more like this.
#111
Posted 27 January 2014 - 10:06 AM
Keep cluster shots as-is, give the LB-10X the solid shot it's supposed to have and the ability to swap. Cut the critmongering bonus for pellets down slightly.
Maximum range as per energy weapons (2X) rather than ballistic 3x since it's smoothbore rather than rifled, a slightly slower ROF than the AC/10 as well.
Seriously, we -need- the ability to use multiple ammo types in many weapons, and the LB-X series is the worst offender.
#112
Posted 27 January 2014 - 10:08 AM
- keep the damage at the max effective range (ie, LB 10-X = 10 damage at 540m)
- increase the damage from 0-540 on the same scaling rate as it decreases beyond the max effective range
#113
#114
Posted 27 January 2014 - 10:24 AM
Bishop Steiner, on 27 January 2014 - 08:45 AM, said:
The only way for this to happen is for the weapon to be recoded as a pure ballistic, like the AC10 currently is, but turning it into a pure spread weapon (think a single "old" SRM). I don't think that the Cryengine allows for proximity interactions so you couldn't have a prox fuse like the weapon is intended. The unfortunate side effect of changing it to a pure spread AC would be that it would raise the skill cap for people that use them now. Instead of leading and spraying/praying, you've got to actually aim and then pray. Essentially, you'd force more work for return. But, the benefit would be that it would be usable at extreme ranges instead of how it is now.
Edited by Trauglodyte, 27 January 2014 - 10:24 AM.
#115
Posted 27 January 2014 - 10:24 AM
#116
Posted 27 January 2014 - 10:39 AM
Roland, on 26 January 2014 - 02:34 PM, said:
It would be great if the LBX was good at infighting, but it isn't.
You want to make it a good infight weapon? Increase its damage per pellet to 1.4, which is where the damage was put for prior titles like MW4. THEN it would have a useful niche.
I find the spread to be extremely minimal inside 180 meters, which is brawling ranges. The problem with that is that at that range for 11 tons I can take 3 MPLs with and some heatsinks and outdamage with a hitscan weapon at the cost of heat and a burn time. the LB10 when I do use it though (rarely) it is great for seeking holes in armor (surprisingly good at legging lights) and ruining a gauss rifle users day.
I would agree its not worth the 11 tons it weighs unless they put in slug ammo or increase the pellet damage or greatly decreased the spread. Internals wrecking as an idea might be nice, but at the point of internals lasers are pretty great because they instant hit and he can't retaliate shoot you for the burn time if he's dead.
#117
Posted 27 January 2014 - 10:47 AM
Trauglodyte, on 27 January 2014 - 10:24 AM, said:
The only way for this to happen is for the weapon to be recoded as a pure ballistic, like the AC10 currently is, but turning it into a pure spread weapon (think a single "old" SRM). I don't think that the Cryengine allows for proximity interactions so you couldn't have a prox fuse like the weapon is intended. The unfortunate side effect of changing it to a pure spread AC would be that it would raise the skill cap for people that use them now. Instead of leading and spraying/praying, you've got to actually aim and then pray. Essentially, you'd force more work for return. But, the benefit would be that it would be usable at extreme ranges instead of how it is now.
Actually, the CryEngine easily allows for this. I was just actually researching the available documents on it and the CProjectile code just needs to be inherited to include rangefinder code on each Update() call. This will check distance and if it reads whatever distance you want set (could be included from the XML file for the weapon), it then can call Explode() or Destroy() (or a new function) that tells it to produce whatever CProjectile code the LBX produces now.
You are correct that it looks like the CryEngine doesn't have proximity code coded into the base object files but that doesn't stop a developer from inheriting and producing their own. PGI has already done this to the engine on many occasions and situations.
Edited by Zyllos, 27 January 2014 - 10:48 AM.
#118
Posted 27 January 2014 - 10:53 AM
I'd like for the LB series to actually work like a prox sensor flak weapon. That is what it is supposed to be. Hell, they stole the concept from the German Flak-88s. That being said, I think that them spending time to make it work like we want it might be asking a bit much given how much content we're missing and how many other weapons aren't operating properly or well enough. If they want to dedicate the time, then go for it. I'd be impressed if they took the easy way out and bumped up the damage a little or made it a single ballistic old style SRM. Either way, it brings the weapon up to snuff a little bit. But, it won't ever be something that the big boys use and that's fine. To each, their own. Right now, though, it is nothing more than a fun weapon to kind of laugh about when you kill someone.
#119
Posted 27 January 2014 - 10:56 AM
Looking at the CClaymore code, all they do is iterate through the lists of valid targets and check distances to them in a certain direction. If this is true, it explodes.
All the LBX CProjectile code would have to do is act just like a CClaymore object for Update() calls for checking proximity. What this does is make the LBX projectile only explode into fragments if it's near a object it can actually damage, but if it gets near terrain, buildings, ect, whatever you want don't include in the m_targetList, then it just lands into the dirt, doing nothing.
Existence of this code should make adding this functionality extremely easy as most of the work is already done. But, problems could arise in using the proximity code for a static object like a CClaymore might make the LBX CProjectile act in unexpected ways. But I find that issue easily solvable after seeing how the new CProjectile code acts.
Edited by Zyllos, 27 January 2014 - 11:00 AM.
#120
Posted 27 January 2014 - 10:58 AM
Have the cluster narrow towards a minimal separation as it goes from 0 to midrange, back to it's original spread at the end of it's range band, then simply start to spread further as it approaches maximum.
9 user(s) are reading this topic
0 members, 9 guests, 0 anonymous users