Jump to content

Do Not Play Jenners


72 replies to this topic

#21 Bombast

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 7,709 posts

Posted 15 May 2018 - 12:55 PM

I can confirm the issue. Currently uploading a video of the problem and restarting client to make sure its persisting.

#22 kailii

    Member

  • PipPipPipPipPip
  • 114 posts

Posted 15 May 2018 - 12:56 PM

View PostVanguard836, on 15 May 2018 - 12:49 PM, said:


Pretty sure that's as indicated in the patch notes ; we have to go in and double check the mechs' armor values


To clarify: That error makes it impossible to save the loadout, and nothing in the Mechlab indicates the source of that error - say, like 65.5 / 65 tons weight or something. So that's not a patch note thing...

#23 Bombast

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 7,709 posts

Posted 15 May 2018 - 01:04 PM



Removing quirks results in the same problem. Restarting client does not fix it.

Edited by Bombast, 15 May 2018 - 01:06 PM.


#24 Vanguard836

    Member

  • PipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 1,101 posts
  • LocationOttawa, ON

Posted 15 May 2018 - 01:06 PM

View PostBombast, on 15 May 2018 - 01:04 PM, said:



Removing quirks results in the same problem. Restarting client does not fix it.


Next step, find out if it happens on the other variants as well.

#25 Bombast

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 7,709 posts

Posted 15 May 2018 - 01:07 PM

View PostVanguard836, on 15 May 2018 - 01:06 PM, said:

Next step, find out if it happens on the other variants as well.


Someone else will have to do that. I'll be damned if I'm going to buy a Jenner.

#26 Vanguard836

    Member

  • PipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 1,101 posts
  • LocationOttawa, ON

Posted 15 May 2018 - 01:09 PM

View PostBombast, on 15 May 2018 - 01:07 PM, said:


Someone else will have to do that. I'll be damned if I'm going to buy a Jenner.

I've got one or two more from the old beta days no worries lol.

#27 Chris Lowrey

    Design Consultant

  • Developer
  • Developer
  • 318 posts

Posted 15 May 2018 - 01:11 PM

Ok, there seems to be some misunderstandings as far as what is going on.

Some structure and max armor values from the arm locations have been redistributed into the torso based locations. This means that the torsos will have more available Max armor compared to what you had in the prior patch, and the arms will have a little bit less.

When you said you had 3 armor max, I was under the impression that it is total. The change has made it to where you have additional armor that you can now distribute to the torso locations compared to before.

The screen shot posted appears correct. The listed "Max armor" of that location is listed as 52. This is greater then what it was previously tuned to.

#28 Vanguard836

    Member

  • PipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 1,101 posts
  • LocationOttawa, ON

Posted 15 May 2018 - 01:15 PM

ok,
F, no issue
K, ST max armor 36/38, CT 48/52

#29 Bombast

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 7,709 posts

Posted 15 May 2018 - 01:16 PM

View PostChris Lowrey, on 15 May 2018 - 01:11 PM, said:

Ok, there seems to be some misunderstandings as far as what is going on.

Some structure and max armor values from the arm locations have been redistributed into the torso based locations. This means that the torsos will have more available Max armor compared to what you had in the prior patch, and the arms will have a little bit less.

When you said you had 3 armor max, I was under the impression that it is total. The change has made it to where you have additional armor that you can now distribute to the torso locations compared to before.

The screen shot posted appears correct. The listed "Max armor" of that location is listed as 52. This is greater then what it was previously tuned to.


Watch, please.

View PostBombast, on 15 May 2018 - 01:04 PM, said:



Removing quirks results in the same problem. Restarting client does not fix it.


#30 Vanguard836

    Member

  • PipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 1,101 posts
  • LocationOttawa, ON

Posted 15 May 2018 - 01:16 PM

View PostChris Lowrey, on 15 May 2018 - 01:11 PM, said:

Ok, there seems to be some misunderstandings as far as what is going on.

Some structure and max armor values from the arm locations have been redistributed into the torso based locations. This means that the torsos will have more available Max armor compared to what you had in the prior patch, and the arms will have a little bit less.

When you said you had 3 armor max, I was under the impression that it is total. The change has made it to where you have additional armor that you can now distribute to the torso locations compared to before.

The screen shot posted appears correct. The listed "Max armor" of that location is listed as 52. This is greater then what it was previously tuned to.


But we can bring it to 52 and save but it will then revert back to a lower amount.

#31 Alexander of Macedon

    Member

  • PipPipPipPipPipPipPipPip
  • Ace Of Spades
  • Ace Of Spades
  • 1,184 posts

Posted 15 May 2018 - 01:21 PM

View PostBombast, on 15 May 2018 - 01:04 PM, said:



Removing quirks results in the same problem. Restarting client does not fix it.

Thanks.

Looks like it is something fucky with Jenners specifically then.

#32 Chris Lowrey

    Design Consultant

  • Developer
  • Developer
  • 318 posts

Posted 15 May 2018 - 01:22 PM

Thanks for the Video.

In cases like that, please strip the armor and then reapply it. It should clear out the errors. Please keep in mind that your total arm armor will be less then before and that max armor has been re-distributed into the torso locations.

#33 Bombast

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 7,709 posts

Posted 15 May 2018 - 01:22 PM

View PostChris Lowrey, on 15 May 2018 - 01:22 PM, said:

Thanks for the Video.

In cases like that, please strip the armor and then reapply it. It should clear out the errors. Please keep in mind that your total arm armor will be less then before and that max armor has been re-distributed into the torso locations.


Are you ******* kidding me. I just posted a video showing you that doesn't work.

#34 Vanguard836

    Member

  • PipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 1,101 posts
  • LocationOttawa, ON

Posted 15 May 2018 - 01:23 PM

View PostChris Lowrey, on 15 May 2018 - 01:22 PM, said:

Thanks for the Video.

In cases like that, please strip the armor and then reapply it. It should clear out the errors. Please keep in mind that your total arm armor will be less then before and that max armor has been re-distributed into the torso locations.

Tried it, didn't work.

#35 Chris Lowrey

    Design Consultant

  • Developer
  • Developer
  • 318 posts

Posted 15 May 2018 - 01:26 PM

View PostBombast, on 15 May 2018 - 01:22 PM, said:


Are you ******* kidding me. I just posted a video showing you that doesn't work.


Sorry juggling a bunch of things right now while streaming. Its strange because it maxes out the armor at 14 (the intended final armor,) but then jumps up to 17 which will make it invalid. Reduce the arms to 14 and it should clear those particular errors. I'm passing this along internally as well, I'll add something when I have it.

#36 suffocater

    Member

  • PipPipPipPipPipPipPip
  • Urban Commando
  • Urban Commando
  • 570 posts

Posted 15 May 2018 - 01:30 PM

I stripped all the mechs where this happens entirely of their armor before and saved it. Problem persists.

#37 Bombast

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 7,709 posts

Posted 15 May 2018 - 01:30 PM

View PostChris Lowrey, on 15 May 2018 - 01:26 PM, said:


Sorry juggling a bunch of things right now while streaming. Its strange because it maxes out the armor at 14 (the intended final armor,) but then jumps up to 17 which will make it invalid. Reduce the arms to 14 and it should clear those particular errors. I'm passing this along internally as well, I'll add something when I have it.


Nope. Stripping all armor from arms, head and legs still results in the same error.

The extra armor added at the end is from quirks, by the way. Error persists even if you remove all durability quirks.

#38 Vanguard836

    Member

  • PipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 1,101 posts
  • LocationOttawa, ON

Posted 15 May 2018 - 01:31 PM

Happens with some of the Jenner IIC as well. Might be a wider issue.

#39 suffocater

    Member

  • PipPipPipPipPipPipPip
  • Urban Commando
  • Urban Commando
  • 570 posts

Posted 15 May 2018 - 01:33 PM

The only chassis I don't see this problem yet is the Stalker. Jenner, Jenner IIC, Cicada and Jagermech do have this problem.

#40 Bombast

    Member

  • PipPipPipPipPipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 7,709 posts

Posted 15 May 2018 - 01:36 PM

Update:

Currently affected mechs that I have been able to test:

Bugged Mechs
Jenner JS7-D (F)
Jagermech JM6-DD

Non-bugged Mechs
Jagermech JM6-A (C)

EDIT: In the case of the JM6-DD, it appears the game is actually letting the player equip more armor than should be possible in the torsos.

Edited by Bombast, 15 May 2018 - 01:45 PM.






5 user(s) are reading this topic

0 members, 5 guests, 0 anonymous users