34 replies to this topic

[InnerSphereNews]

Greetings MechWarriors,

First off we want to say a huge thankyou to all of our players. We are here and we are listening.

We hope Hotfix 1 addressed a lot of the performance issues that players reported.
We are working on Hotfix 2 right now and we're almost done, our ETA is early next week. Hotfix 2 continues with performance and coop fixes along with many others – check them all out in detail below.
Thank you for your support!

-The MechWarrior 5: Clans Team

HOTFIX #2 Details

Fixed Issues:

Co-Op

- Fixed a bug where clients would sometimes be stuck in the fade to black state after using a repair bay
- Adjusted the position of the Union takeoff in ‘Pirate’s Bay'
- Fixed an issue for clients in ‘A World on Fire’ where an enemy 'Mech would disappear briefly during a sequence
- Fixed a replication issue with the gate generators on ‘Kishi Kaisei’
- Fixed a replication bug where clients could not walk through certain wall assets destroyed by other clients in ‘A World on Fire’
- Fixed a bug where the mission area would close off before all players have left in ‘Hold the Line’
- Fixed a bug where the small gate in ‘Jaguar’s Down' would not open for clients
- Fixed a client bug where they could not see Chassis Milestones
- Fixed a Co-Op bug where users can join mid-mission without a HUD
- Fixed an occurrence where clients can start a mission with the Scan Mode prompt flashing
- Fixed a rare instance where an enemy would not appear in ‘Smuggler's Den'

Campaign Missions

- Fixed a salvage crate in ‘Combat Patrol’ that was giving the incorrect rewards
- Fixed an issue on ‘The Golden Forge’ where some mechs were temporarily indestructible
- Fixed the Union takeoff sequence in ‘Inspection Duty’
- Fixed a bug where certain enemy ‘Mechs would not target you in 'A World on Fire’
- Adjusted objectives at the start of ‘Kishi Kaisei’ so they can no longer be missed
- Changed all ally ‘Mechs in 'Traffickers’ to use the Beta Galaxy camo pattern
- Reduced the chances saKhan Weaver would get caught on terrain in ‘Pirate’s Bay'
- The host is now the only one able to make the choice in ‘Reckoning’
- Fixed the ‘Mech cockpit during the intro of 'A World on Fire’
- Reduced the chances of critical explosion on the boss in ‘Kishi Kaisei’
- Fixed Jayden’s helmet in his communication pips in the first mission
- Added the proper pilot names when targeting allies in ‘Kishi Kaisei’

Art

- Improved the texture of the large trees on Huntress
- Adjusted the flamer VFX orientation so the origin point appears correct

Audio

- Fixed an audio issue where sound was temporarily ducked at the start of the first mission
- Fixed an instance where Naomi would repeat the same line twice in a row in ‘No Stone Unturned’

Gameplay

- Increased the SRM ammo values up to 150 rounds per ton
- Buffed the Corsair on ‘No Stone Unturned’
- Added a confirmation prompt when selecting Restart Mission on the pause menu
- Disabled the ability to use scan while spectating
- Removed the ability to order commands when your 'Mech is shut down
- Fixed a bug where players can sometimes lose repair bay capabilities
- Adjusted the scannable object radiuses to be more accurate
- Fixed a bug where the mission boundary lines would disappear when using night vision
- Fixed a bug where you could fire weapon groups 2-6 while the radial menu is open

UI

- Adjusted the technician panel on the repair screen on ultrawide aspect ratios
- Updated the pilot skill upgrade menu to show available currency
- Updated the active probe element on the HUD
- Mechlab how properly greys out options when the user has no 'Mechs
- Adjusted the transitions when backing out of missions in Mission Central
- Reduced the flickering of the 'Mech in the Mechlab and Marketplace while navigating menus and performing actions
- Adjusted the safe zone width to work better with triple monitors
- Fixed the scroll prompt on the Artbook menu

Settings

- Fixed a joystick control bug where invert Y-Axis would instead invert X-Axis after applying
- Fixed instances where the spacebar key to apply changes would not function
- Fixed a bug where the Mirror Paper Doll option would not apply until you restarted a mission

Localization

- Major update across the board for Japanese language
- Fixed the overlapping/out of bounds text on several screens in Russian
- Fixed the translation for ‘general’ in the Marketplace and Mech Bay in Japanese
- Fixed the spacing on some settings menu prompts in German

We’re currently working on these fixes and expect them to be in Hotfix 2 although not confirmed yet:
More performance improvements

- Add an option in Co-Op to allow clients to select the pilot they want to play and swap pilots
- Fixed a Co-Op bug where users were stuck as other pilots when starting a new campaign after playing a Co-Op session
- Fixed a Co-Op issue where clients would view stuttering with other players
- Fixed a bug where key bindings would be changed without applying them
- Fixes for missing audio in pause menu
- Fixes for audio on burst fire weapons
- Fix for weapon group audio being too quiet
- Fix for DLSS option permanently greying itself out under rare conditions

We heard you didn’t like this – so we reverted it

- Users should not be able to unbind Primary KBM input actions. (But you will have the unbound issue if you do this)

Other issues:

- We heard some players are experiencing audio issues in cinematics – we’re looking into this and will fix as soon as we can.
- We heard that lower end AMD cards are having driver issues – so we’re reaching out to AMD to try and get a solution as quickly as possible.

Until Hotfix 2 drops here are some workarounds for 2 controller issues:

For controls changes not saving after game restart:
- After changing the controls to your preference, close the game.
- Open File Explorer
- Click the address bar at the top
- Copy-paste the following line and hit Enter:
- %localappdata%\MW5Clans\Saved\Config\Windows\
- %localappdata%\MW5Clans\Saved\Config\WinGDK\ (for Game Pass and Microsoft Store)
- Right-click on the GameUserSettings.ini file and select Properties
- Under the General tab check Read-only and click OK.

For not being able to invert Joystick on Y axis:
- Open File Explorer
- Click the address bar at the top
- Copy-paste the following line and hit Enter:
- %localappdata%\MW5Clans\Saved\Config\Windows\
- %localappdata%\MW5Clans\Saved\Config\WinGDK\ (for Game Pass and Microsoft Store)
- Use Notepad to open GameUserSetting.ini
- Edit the following line to say True:
- InvertJoystickYAxis=True

[IronClaws]

Thanks for the bug fixes.

[w0qj]

Any [Spoilers] in above patch notes?

If yes, perhaps a [Spoiler_Warning] should be added on top of the Patch Notes!

[Rhaelcan]

I payed 80 bucks and I couldn't even play it. Kept crashing over and over. Sometimes said '120 minutes' Probably waited on loading screen that long. So I refunded it.
'

[rascje]

Exactly like I intended to do with mw5mercs, I think I'll wait a few months before playing mw5clans.
Then if I haven't played mw5mercs yet, it's a negligible detail... LOL

[The Chancelor]

Looking forward for further performance improvement. I got proper fps but even between the missions my 4700super reaches 80 degrees celcius!!!

[simon1812]

just want to bring this to your attention because Im curious about it


https://mwomercs.com...late-q3-update/

soooo what happened to october's patch? will there be a Halloween event? october's free mech? balances? new map?

Edited by simon1812, 19 October 2024 - 07:05 AM.

[ENOVA]

w0qj, on 18 October 2024 - 06:51 PM, said:

Any [Spoilers] in above patch notes?

If yes, perhaps a [Spoiler_Warning] should be added on top of the Patch Notes!

I saw no spoilers, man. Exept maybe missions names, but they say nothing to me

[Sgt Hatred]

Picked up this game. Had high hopes. Right at the end of the very 1st mission, shooting some enemies would have them teleport through the floor, rendering them unkillable and unable to progress further. My only option is to restart the entire mission? I quit, uninstalled and requested a full refund from steam. I really wanted to play this game, especially after watching playthrough clips from TTB. I was dying to try it out for myself, but the game doesn't want me to play it. So oh well. That's that. Everyone has a different experience. That was mine. Buyer beware.

[IronClaws]

The Chancelor, on 18 October 2024 - 11:32 PM, said:

Looking forward for further performance improvement. I got proper fps but even between the missions my 4700super reaches 80 degrees celcius!!!

The Specs for the RTX 4070 series show a maximum safe operating temperature of 90°C, so 80 is in the safe operating range. If your card routinely runs at the high end of the temperature range when it is doing what it was designed for, then the heatsink/fan on it may be bad or inadequate, or the airflow inside your PC case is not adequate.

[The Chancelor]

IronClaws, on 19 October 2024 - 10:57 AM, said:

The Specs for the RTX 4070 series show a maximum safe operating temperature of 90°C, so 80 is in the safe operating range. If your card routinely runs at the high end of the temperature range when it is doing what it was designed for, then the heatsink/fan on it may be bad or inadequate, or the airflow inside your PC case is not adequate.

Maybe I should switch to double heatsinks.

[IronClaws]

The Chancelor, on 19 October 2024 - 01:08 PM, said:

Maybe I should switch to double heatsinks.

I always buy MSI GPUs, they seem to have the best stock cooling systems and I have never had one of their cards fail.

[ShadowWolf Kell]

I'm at a point where I made a specific choice,

Spoiler

and I'm finding I'm on the wrong ship with the wrong star listed in the barracks. Additionally, it played the cutscenes for both choices. For whatever odd reason, sticking with CSJ results in being on the Dragoon's ship with their crew, and pilots in the barracks.

I originally made one choice, saved and then decided to redo the mission to make the other so I'd have a save for both.

Now my game has been sabotaged by Blakists, presumably at the behest of Waterly.

[Captain Dictator]

Any idea when the MW5: Clans screenshot thread is going up? I don't want to miss it!

Edited by Captain Dictator, 19 October 2024 - 09:55 PM.

[FRAGTAST1C]

Where is the optimization?

i7 12700, 32GB DRR5 RAM, 3080ti 12GB OC gpu, running on SSD and I have a sludgy framerate with a mix of High and Medium settings. What's going on?

[BumbleBee]

i714700, 32GB RAM, RTX3070, SSD
Mixed High-Maximum 1440p
running great and smooth for me

[Haman Karn]

Would love to know how people are getting this game to run a smooth 60fps
Ive seen a lot of youtube playthroughs and most have obvious fps issues or blurry upscaling, but they seem fine with it.

i7-12700, 3070ti, 32gb, SSD, 1080p
Every other game runs fine
Cyberpunk high settings, 60fps with a bit of raytracing easy.

MW5 Clans the highest fps i saw was 47 on low/ medium settings
Had to refund and wait for sale when its ready
Dissapointed

Edited by Haman Karn, 20 October 2024 - 08:47 AM.

[IronClaws]

FRAGTAST1C, on 20 October 2024 - 04:08 AM, said:

Where is the optimization?

i7 12700, 32GB DRR5 RAM, 3080ti 12GB OC gpu, running on SSD and I have a sludgy framerate with a mix of High and Medium settings. What's going on?

Are you running it at 1080p or 2K or 4K? 3000 series GPUS are not really enough to run modern games with acceptable framerates at any resolution higher than 1080p. Also, I did notice that at least with my 9th gen I5, I see up to about 98% CPU usage when the game is running, so I can't run anything in the background, or the game does stutter and mess up. Running the game in Fullscreen with nothing running in the background (especially Discord) helps.

Haman Karn, on 20 October 2024 - 08:46 AM, said:

Would love to know how people are getting this game to run a smooth 60fps

In one of my previous posts I said that I don't know exactly what framerates I am getting when I play, but it is smooth and very playable at the settings I use.

Also, Cyberpunk started development in 2016 and uses their Red Engine 4, Clans uses Unreal 5.

Edited by IronClaws, 20 October 2024 - 10:06 AM.

[Pyc_MadWolf]

I'm surprised, but with my weak processor, the game works stably at 60 FPS at FHD. Yes, sometimes there are jerks and drops of FPS up to 45 with a large number of mechs, but this does not prevent me from fighting at light omnimechs at speeds and getting targeted. It may be worse in the cities, but so far everything pleases me. I want to note that DLSS saves and I have it on DLAA. Here are my graphics settings, almost everything is at maximum. The 40 series video card is very saving, new technologies solve it. And the FHD resolution is not that demanding.
My iron: CPU i5 7500, RAM 16 Gb, GPU RTX 4060 ti 8Gb, SSD M2 Samsung 970 Evo Plus.
https://i.ibb.co/Csz...-220027-449.jpg
https://i.ibb.co/209...-220027-061.jpg

[GargoyleVine]

I see the y axis bug on controller is not my imagination, thanks for addressing the issue !!