Jump to content

Jm6-A Jagermech Build Questions


13 replies to this topic

#1 Kyle Wright

    Member

  • PipPipPipPipPipPipPip
  • Fury
  • Fury
  • 663 posts

Posted 25 June 2013 - 08:59 AM

Hey everyone,
Just wanted to get some ideas for how to build my JM6-A. I know most of you will say I shouldve gotten the gunboat. Reason I chose this is because I originally was going to get a Catapult C1 and instead decided that I can get better bang for the buck and do the same thing. I mainly do standoff support and now and again will close distance to help my unit out.

I was thinking of switching the Ac/2's out with Guass Rifles, and possibly either Lrm15+ artemis or outfitting with streaks srm's. Id keep the medium lasers or up grade to LL. Heat seems to be a big issue, so double heat sinks.

Should I stay with a std engine or go xl?

Thanks for any help.

#2 heleqin

    Member

  • PipPipPipPipPip
  • Survivor
  • Survivor
  • 101 posts

Posted 25 June 2013 - 09:26 AM

if you want to be able to move with a pair of Gauss rifles, you'll need to go with an XL. Jager's have side torso's that are incredibly easy to hit, so XL engines are always a huge risk, but one that usually comes with a high reward (ie more tonnage for weapons).

i currently run my A with 2 AC5, 2 MLas and 4 streaks, its a very reliable build, good against just about everything, though its not a brawler or a sniper, its a mid-range support unit, and with an XL 280 or higher engine, its also fast enough for hit and run tactics. its also great as a wing-man for an assault, the SSRMs allow you to fend off pesky lights and mediums while the AC5s and MLas add good dps for direct fire support, plus the AC5s have great range.

the A is very flexible with good hard points, but you'll have to decide what role you want to play. if you want to use all the hard-points you'll have to make some sacrifices or mix your ranges like i have. if you want to use Gauss like the DD and S builds, you really won't be able to use the missile hard-points and will have a hard time having both enough ammo and tonnage for the energy slots. if you maximize the missile hard-points for LRMs like you might a Catapult, you won't have the tonnage for ballistic weapons.

if you want to drop the ballistic slots there's plenty of room on the A for 2 LLas in the torsos, and depending on the engine you chose, enough missile tonnage in the arms for 20-25 LRMs per arm, per salvo.

personally i think the jagers are wasted as LRM turrets, and much better as strike units, taking advantage of the ballistic slots.

#3 zhajin

    Member

  • PipPipPipPipPipPipPip
  • 561 posts

Posted 25 June 2013 - 09:49 AM

View Postheleqin, on 25 June 2013 - 09:26 AM, said:


personally i think the jagers are wasted as LRM turrets, and much better as strike units, taking advantage of the ballistic slots.


I agree in generally. though i will say its make grinding xp easy. i ran my A with 2 alrm x 15, and 2 large lasers (or 2x ssrms and 2ml) just to get it unlocked. not as good as a catapult or stalker for lrms in general but they do make it easy to get it unlocked. you will not get a lot of damage but a lot of assist and usually a kill or two.

also xl is fine for lrms or sniper builds but if you want to be brawling in the thick of it it can be risky.

Edited by zhajin, 25 June 2013 - 09:51 AM.


#4 utzelbrutz

    Member

  • PipPipPip
  • The Chief
  • 64 posts

Posted 25 June 2013 - 10:03 AM

My current build:
http://mwo.smurfy-ne...bca2182156658d0

Pros:
STD Engine feels like a tank. Even in a Jagermech.

Cons:
You have to watch the heat but it's nasty.


If you want Gauss and SSRM:
http://mwo.smurfy-ne...4e9ae25dfd9d849

I prefer the SRM because they don't need a lock.

#5 zztophat

    Member

  • PipPipPipPipPipPip
  • 369 posts

Posted 25 June 2013 - 01:44 PM

I am using my Yager-A as a LRM boat at the moment, because it is the only LRM boating capable mech I have and I rather like it.

My most used loadout before I turned in to a missile turret was was x4 streaks and 2 PPCs, kind of an odd mix of weapons but it was effective as hell.

As for XLs: I used them in all 4 of my yagers and as trade-off I don't ever use my yagers for front line combat.

#6 Raso

    Member

  • PipPipPipPipPipPipPipPip
  • The Sickle
  • The Sickle
  • 1,298 posts
  • LocationConnecticut

Posted 25 June 2013 - 06:48 PM

Say pi$$ off to Harmony Gold and make yourself a Defender Desdroid.

Likewise you could go with LRMs and PPCs. You could also go with a single Gauss a some LRMs but I think the PPCs will get you better results.

Finally, ammo might be a little short but I've known a few people to roll with something along these lines. You'll be packing SSRMs, AC5s and Medium Lasers. Everything but the kitchens sink!

#7 FreakZero

    Member

  • Pip
  • Philanthropist
  • 19 posts
  • LocationMid West

Posted 26 June 2013 - 04:52 PM

View PostRaso, on 25 June 2013 - 06:48 PM, said:

Finally, ammo might be a little short but I've known a few people to roll with something along these lines. You'll be packing SSRMs, AC5s and Medium Lasers. Everything but the kitchens sink!


This is almost the exact build I use as well and its excellent at sustained dps, and eats lights and mediums for breakfast. I replace the standard engine with an XL for more heatsinks and ammo.

Edited by FreakZero, 26 June 2013 - 04:54 PM.


#8 Skydrive

    Member

  • PipPipPipPipPipPip
  • Legendary Founder
  • Legendary Founder
  • 286 posts

Posted 26 June 2013 - 05:10 PM

Got mine with a XL 265 engine, 2 UAC5's, 2 med lasers, and 4 LRM5's, and I think AMS. With LRM5's you just bombard the enemy with less care for wether or not they will hit. Just make sure you got a ton of ammo for each 5 launcher. Possessing 2 UAC5's also means that you can do about 10 damage at range, and if felt necessary, double fire and risk the jamming. Today the double fire really payed off in frozen city where a dragon came up behind me and melted my rear CT armour.

Basically this setup means your able to fulfill both the direct fire, and inderect fire support roles. Also possible getting alot of kill steals here and there... it happens :(

#9 Punk Oblivion

    Member

  • PipPipPipPipPipPip
  • The Scythe
  • The Scythe
  • 352 posts

Posted 27 June 2013 - 11:29 AM

Well since I have to finish mastering my JM6-A, I figured I would find something that worked well. As a brawler I failed time and again. I think the LBX and SRM's need buffs before I can make it work, But I did put together a mid-long range mech that is finally working well for me.

http://mwo.smurfy-ne...a00baba33d8bf0d

Yes, I know the engine is pretty small, it keeps me out of the front lines at the beginning of matches haha

#10 Thoman Coston

    Member

  • PipPipPipPipPipPip
  • Mercenary Rank 1
  • Mercenary Rank 1
  • 225 posts
  • LocationClan Occupation zone

Posted 28 June 2013 - 08:13 AM

2 ERPPC 2UAC5 280xl
or
2 ERPPC 2LRM15 artemis 280xl

The lrm version is a bit frustrating to use in pugs, since unless I get a LOS, it is hard to maintain a reliable target lock. Since i pug most time, i find the direct fire option to be more reliable.

#11 ZeProme

    Member

  • PipPipPipPipPipPipPip
  • The Spear
  • 562 posts

Posted 28 June 2013 - 08:16 AM

I think most builds with the Jagermech requires XL engine to be effective unfortunately. I don't know how you can carry heavy firepower without XL engines for Jagermechs.

#12 PEENWALLACE

    Rookie

  • 1 posts

Posted 02 July 2013 - 08:32 PM

I've had some success with:

2 x AC5 (6 tons ammo)
2 x LRM5 (2 tons ammo)
2 x MLas
315XL
Endo
DHS
Standard armor - Max, except for legs

Just stay back and crank away with the AC5s (there is plenty of ammo), supplementing with the LRMs when you can get a good lock. It runs pretty cool, so heat isn't an issue. I had buyer's remorse soon after getting the JM6-A, but it's really grown on me as is now one of my favorite mechs.

#13 Zordicron

    Member

  • PipPipPipPipPipPipPipPipPip
  • Overlord
  • Overlord
  • 2,547 posts

Posted 02 July 2013 - 08:52 PM

Decide on what you want to do for the team.

Long range support- put a couple LRm10's on, and some AC2's. maybe some SL just in case you run out of ammo.
LRM boat- meh, this is sort of a waste for the chassis. IMO, if you are going to spend time on a mech, do something a different one doesnt do.
Short range brawl- well any jager does AC40. Except mine. I hate AC40. But it works.

I run 2 AC5, 4 streaks, and 2 ML, as above, b ut i went with smaller std. engine for durability. I average 500+ dmg a match, but few kills. Engage with AC5 at range, open up with streaks AC5 and ML when you get in close. Dont waste AC5 ammo on lights, not when you have ML and 4 streaks. They will eat some of that and run off, or die if they are stupid. Also, dont be the front man. You are a jager, you need to be a little off to the side or back, and shoot at stuff that isnt looking at you, and help your team pals blow away their targets. You wont get kill XP like a PPC stalker, but you will get 4-6 assists easily if you do it right.

if you decide to go XL, i recommend going with ultra 5's then. But then you REALLY need to make sure you arent exposed. I run my DD with 2 ultras, and then 4 MG and 2 MPL with XL300. similar play style, support fire, but more fragile. You could do similar but with streaks and no MG on the A. It is a lot of fun, and when you have a good match, your whole team does.

I also tried 2 AC2s, 2ML, and then 4LRM5's. The LRM5 can be hard to target groups with as AMS rips them down so bad. But it is also fantastic suppression fire(especially chainfire, its almost non stop) and if there is no AMS, it is solid DPS from indirect fire. had a fantastic match a couple times with it, best was when a raven had a narc along(NARC, wth is that ;) ) Hit a dragon with it, run dragon run- but he was toast. I put AC2 on for more room for ammo, plus the extra long range is good because 2ML is not sufficient to fight up close with, and there wasnt as much room for heatsinks.



Also, LOL at the suggestions of PPC and gauss. Gerderm, some people will stuff those things on everything. IMO, play the game with loadouts that fit the chassis closer to cannon, it is a lot more fun, even if you get fewer OMGKILLZ. K/D ratio =! fun.

#14 Neput Z34

    Member

  • PipPipPipPipPipPip
  • FP Veteran - Beta 1
  • FP Veteran - Beta 1
  • 244 posts
  • Location...far away from a Land of my birth...

Posted 11 July 2013 - 04:23 PM

On a Jagger 6A my favorite build endedup being
2x UAC5 + 4 tons of ammo
4x SSRM2 + 1 ton of ammo
2x Med Las
STD 250
Endo, Ferro, BAP

All that fits with 0 crit space remaning

http://mwo.smurfy-ne...3aab8ff8665d31a





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users