Yeah, switched both windows and graphic card to performance better than quality. Still, my pc is very old, but at least now I can get some 400-600 dmg games, thing that I couldn´t do before.
12
Fixes For Performance Issues - Updated 1/3/2019
Started by MechWarrior319348, Sep 08 2015 06:28 PM
user.cfg performance Guide
81 replies to this topic
#42
-
-
- Big Daddy
- 997 posts
Member
- LocationInside a straightjacket
Posted 06 July 2016 - 08:06 PM
I cant make the user.cfg better, sry.
But, I did a little arts and crafts project with my laptop for better performance. I'll see about posting pictures later. Its a funny little idea, but its done wonders for keeping my laptop cool.
you need a desk fan (smallish with a round fan shroud), some construction paper, some kind of tubing (decent circumference), and some duct tape.
1. fold the construction paper in the shape of a cone, and tape the big end to the back of the fan shroud (so that the fan pulls air from the cone). If you can't manage to get the paper on the back of the fan, then try to take the blades out of fan and turn them around so that it pulls air from the front. Then you can try to tape it up on the front of the fan.
2. tape the hosing to the small end of the paper cone.
3. tape the hosing to the exhaust vent on the laptop. (I used tubing and attachments from my vacuum cleaner in order to tape it to the exhaust vent)
And bam, the fan will pull heat exhaust from the laptop.
DO NOT BLOW AIR INTO THE LAPTOP, ONLY PULL AIR OUT!!!! you dont want to blow hot exhaust back into the laptop.
But, I did a little arts and crafts project with my laptop for better performance. I'll see about posting pictures later. Its a funny little idea, but its done wonders for keeping my laptop cool.
you need a desk fan (smallish with a round fan shroud), some construction paper, some kind of tubing (decent circumference), and some duct tape.
1. fold the construction paper in the shape of a cone, and tape the big end to the back of the fan shroud (so that the fan pulls air from the cone). If you can't manage to get the paper on the back of the fan, then try to take the blades out of fan and turn them around so that it pulls air from the front. Then you can try to tape it up on the front of the fan.
2. tape the hosing to the small end of the paper cone.
3. tape the hosing to the exhaust vent on the laptop. (I used tubing and attachments from my vacuum cleaner in order to tape it to the exhaust vent)
And bam, the fan will pull heat exhaust from the laptop.
DO NOT BLOW AIR INTO THE LAPTOP, ONLY PULL AIR OUT!!!! you dont want to blow hot exhaust back into the laptop.
Edited by Dillion Harper, 06 July 2016 - 08:06 PM.
#43
-
-
- Big Daddy
- 997 posts
Member
- LocationInside a straightjacket
Posted 02 October 2016 - 03:55 PM
New User.cfg
Backup the old one in case you don't like this one.
Also, delete the shader cache before you start the game with the new user.cfg.
C/users/user/saved games/mechwarrior online/shaders/cache
Backup the old one in case you don't like this one.
Also, delete the shader cache before you start the game with the new user.cfg.
C/users/user/saved games/mechwarrior online/shaders/cache
Edited by Dillion Harper, 02 October 2016 - 03:58 PM.
#44
-
-
- Big Daddy
- 997 posts
Member
- LocationInside a straightjacket
Posted 12 October 2016 - 08:24 PM
If you experience wierd white boxes or other technical looking graphic box things when you first drop into a match, that is the game loading up new textures, once that texture has been cached, it won't happen again.
Every time you delete the shader cache you will see these oddities.
I do believe that it is good practice to delete that shader cache every once in a while. Maybe after every patch.
Every time you delete the shader cache you will see these oddities.
I do believe that it is good practice to delete that shader cache every once in a while. Maybe after every patch.
#45
-
-
- The Solitary
- 911 posts
Member
Posted 20 October 2016 - 11:42 PM
Hey, thanks for the good topic. I've found some old youtube flick, and it seems that for this guy ground/terrain/object textures ain't changing when his mech closes to them (like texture streaming, lod distance or "Object Detail" in options). Is there any way of forcing it like he did?
Edited by G4LV4TR0N, 20 October 2016 - 11:44 PM.
#46
-
- Knight Errant
- 4 posts
Rookie
Posted 29 October 2016 - 04:10 AM
From 7-12 fps on up to 19-27 fps with the tips on this thread, I appreciate it.
#47
-
-
- The Solitary
- 300 posts
Member
Posted 16 January 2017 - 11:57 PM
Dillion Harper, on 08 September 2015 - 07:09 PM, said:
As far as I know, there is know way to know what PGI has disabled (fill me in if there is a list). But yeah, i think alot of it does work, because there is definitely a noticeable increase. Im not finished with it either, Ive been reading the Cryengine 3 manual, and some guides, later I plan to do more tweaking. But i dont have the patience to go testing each command 1 by 1 to see what works. If it doesn't work, no harm done, if it does, then great.
explorer,exe is the windows operating system if you don't run that anything involving Windows is irrelavant you should alsao gointo the C:\windows\temp folder and empty that as well. That is the windows cache folder. Antivirus should be run daily. The worst thing that can happen is you get ransomware software on your computer and you can't pay the ransom. the only thing you can do is get your C drive reformatted or run a powerful magnet over a regular hard drive and reformat then reload everything on yur hard drive. It is a good idea to run games from somewhere other than your C drive if possible. Back up your data at least once a month. That way you don't lose anything you have stored there.
#48
-
-
- The Solitary
- 300 posts
Member
Posted 17 January 2017 - 12:25 AM
Dillion Harper, on 06 July 2016 - 08:06 PM, said:
I cant make the user.cfg better, sry.
But, I did a little arts and crafts project with my laptop for better performance. I'll see about posting pictures later. Its a funny little idea, but its done wonders for keeping my laptop cool.
you need a desk fan (smallish with a round fan shroud), some construction paper, some kind of tubing (decent circumference), and some duct tape.
1. fold the construction paper in the shape of a cone, and tape the big end to the back of the fan shroud (so that the fan pulls air from the cone). If you can't manage to get the paper on the back of the fan, then try to take the blades out of fan and turn them around so that it pulls air from the front. Then you can try to tape it up on the front of the fan.
2. tape the hosing to the small end of the paper cone.
3. tape the hosing to the exhaust vent on the laptop. (I used tubing and attachments from my vacuum cleaner in order to tape it to the exhaust vent)
And bam, the fan will pull heat exhaust from the laptop.
DO NOT BLOW AIR INTO THE LAPTOP, ONLY PULL AIR OUT!!!! you dont want to blow hot exhaust back into the laptop.
But, I did a little arts and crafts project with my laptop for better performance. I'll see about posting pictures later. Its a funny little idea, but its done wonders for keeping my laptop cool.
you need a desk fan (smallish with a round fan shroud), some construction paper, some kind of tubing (decent circumference), and some duct tape.
1. fold the construction paper in the shape of a cone, and tape the big end to the back of the fan shroud (so that the fan pulls air from the cone). If you can't manage to get the paper on the back of the fan, then try to take the blades out of fan and turn them around so that it pulls air from the front. Then you can try to tape it up on the front of the fan.
2. tape the hosing to the small end of the paper cone.
3. tape the hosing to the exhaust vent on the laptop. (I used tubing and attachments from my vacuum cleaner in order to tape it to the exhaust vent)
And bam, the fan will pull heat exhaust from the laptop.
DO NOT BLOW AIR INTO THE LAPTOP, ONLY PULL AIR OUT!!!! you dont want to blow hot exhaust back into the laptop.
maybe cut the bottom out of a plastic bag and put the cone in the plastic bag. tape the bag to the back end of the fanslit the plastic bag for the fan mounting and connect a the tube from a toilet paper roll. The plastic bag allows for a better seal around the back of the fan and the cone will give it shape. something firm on the other end will give you something firm to attatch to the laptop. or find the intake for the power supply's fan and blow room temperature air into the laptop, I think the intake vents are on the bottom or rear of the laptop. on a desktop the power supply is more obvious and you can find were the air comes in from.
#49
-
-
- 47 posts
Member
- LocationMars Delta Labs
Posted 05 February 2017 - 07:46 AM
Hi Dillion, I was tinkering with attributes.xml and user.cfg and lost the one that was working for me, just the one you posted previous to the last one you did. I guess that you don´t have any kind of repository to restore it, do you?
Thanks in advance.
P.D: nevermind, just solved it.
Thanks in advance.
P.D: nevermind, just solved it.
Edited by RoToR, 09 February 2017 - 02:33 PM.
#50
-
-
- Big Daddy
- 997 posts
Member
- LocationInside a straightjacket
Posted 08 April 2017 - 12:58 PM
I made another user.cfg, give it a try and see if it makes a difference. Copy and paste, or download. Backup your old one though.
Also here is a little something if you think you are having cpu throttling issues, especially useful for multi-core processors.
Park Control
Spoiler
Also here is a little something if you think you are having cpu throttling issues, especially useful for multi-core processors.
Park Control
Edited by Dillion Harper, 07 August 2018 - 11:20 PM.
#51
Posted 27 April 2017 - 08:52 AM
you have options in there, that are not recognised by the build of cryengine that MWO uses ...
r_UsePOM = 0 e_view_dist_ratio_vegetation = 1 e_vegetation_min_size = 900 r_silhouettePOM = 0 r_ChromaticAberration = 0.0 e_particles_lod = 0.1these don't even exist .... and that was just at a glance ... half of them would be cvars, if they didn't have bonus underscores in them ... and then maybe about 40% of the cvars are 'locked' and beyond that, you need to load the ones that are tunable during level load (tuning.cfg) ... and apparently you should really avoid screwing with physics at all ... setting the relevant sys_spec to 1, does lower some of the physics solvers 'accuracy' from 3, but its really not the thing that's killing FPS for most ... and why would you set the maxfps so low ... that's an upper limit, not a lower limit ... do you get night/heatvision at all with that ? ...
#52
-
-
- Hero of Marik
- 329 posts
Member
Posted 28 April 2017 - 12:24 AM
e_ShadowsReScale = 1.0
r_TesselationTriangleSize = 1
you put 1 but should be much more to improve performance as 1 means best
This is to improve geometry of the textures. you can put that between 1 to 100
be carefull here the lower value is the better quality because of the small size of the triangles, your video cards will allow more polygons per objects.
a
typing error, fix in your cfg
took from
https://forums.rober...ds-explaination
r_TesselationTriangleSize = 1
you put 1 but should be much more to improve performance as 1 means best
This is to improve geometry of the textures. you can put that between 1 to 100
be carefull here the lower value is the better quality because of the small size of the triangles, your video cards will allow more polygons per objects.
a
typing error, fix in your cfg
took from
https://forums.rober...ds-explaination
Edited by multisoul, 28 April 2017 - 12:29 AM.
#53
-
-
- The Solitary
- 911 posts
Member
Posted 28 April 2017 - 01:03 AM
Edited by G4LV4TR0N, 5/9/2017, 04:10 AM.
I got special low-req config here, it's bit different and made for dual core CPU's. If anybody wants to try or care to review:
I got special low-req config here, it's bit different and made for dual core CPU's. If anybody wants to try or care to review:
Quote
//============================ ENABLE CONSOLE ===================================
con_restricted = 0
//============================ CPU THREADS ======================================
sys_main_CPU = 0
sys_TaskThread4_CPU = 0
sys_TaskThread2_CPU = 0
sys_physics_CPU = 1
sys_streaming_CPU = 1
sys_TaskThread5_CPU = 1
ca_thread1Affinity = 1
sys_TaskThread0_CPU = 1
sys_TaskThread3_CPU = 1
ca_thread0Affinity = 1
sys_TaskThread1_CPU = 1
r_WaterUpdateThread = 1
//============================ IN GAME SETTINGS =================================
sys_spec_Environment = 1
sys_spec_GameEffects = 1
sys_spec_ObjectDetail = 1
sys_spec_Particles = 1
sys_spec_PostProcessing = 1
sys_spec_Shading = 1
sys_spec_Shadows = 1
sys_spec_Texture = 1
sys_spec_Physics = 1
sys_spec_Sound = 1
//============================ SYSTEM RAM THROUGHPUT ============================
//sys_budget_streamingthroughput = 6661120 /use "winsat mem" then multiply result by 1024
//sys_LocalMemoryGeometryStreamingSpeedLimit = 6505 /use "winsat mem"
//sys_LocalMemoryTextureStreamingSpeedLimit = 6505 /use "winsat mem"
//sys_streaming_max_bandwidth = 6505 /use "winsat mem"
//============================ KNOWN AND CHECKED ================================
r_MultiGPU = 0
r_MultiThreaded = 1
r_ImpostersUpdatePerFrame = 1000
q_Renderer = 0
e_Clouds = 0
r_WaterUpdateFactor = 20
r_WaterUpdateDistance = 20
r_Beams = 0
r_BeamsMaxSlices = 16
r_BeamsDistFactor = 1
r_TexSkyResolution = 2
r_ImposterRatio = 4
r_EnvTexResolution = 0
r_EnvCMResolution = 0
r_DynTexMaxSize = 24
r_DynTexAtlasCloudsMaxSize = 8
r_DynTexAtlasSpritesMaxSize = 8
r_TexAtlasSize = 256
r_VegetationSpritesTexRes = 8
e_VegetationMinSize = 2048
e_MaxViewDistSpecLerp = 0
e_SkyQuality = 2
e_CoverageBufferReproj = 1
//============================ UNKNOWN AND UNCHECKED ============================
r_GeomInstancing = 1
r_stereodevice = 0
//q_Quality = 0 //sets whole set of quality Shaders to 1 or higher
q_ShaderGeneral = 0
q_ShaderGlass = 0
q_ShaderVegetation = 0
q_ShaderIce = 0
q_ShaderTerrain = 0
q_ShaderShadow = 0
q_ShaderWater = 0
q_ShaderFX = 0
q_ShaderPostProcess = 0
q_ShaderHDR = 0
q_ShaderSky = 0
q_ShaderMetal = 0
e_Recursion = 0
e_HwOcclusionCullingObjects = 0
e_ObjQuality = 0
e_ViewDistMin = 0.1 /was10
e_ViewDistRatio = 0.1 /was19
e_ViewDistRatioCustom = 0.1 /was19
e_ViewDistRatioDetail = 0.1
e_ViewDistRatioLights = 0.1 /was5
r_DrawNearZRange = 0.08
e_TerrainNormalMap = 1
e_TerrainTextureStreamingPoolItemsNum = 16
e_TerrainOcclusionCullingMaxDist = 10
e_TerrainOcclusionCullingStepSize = 4
e_TerrainOcclusionCullingStepSizeDelta = 1.05
e_VegetationSprites = 1
e_VegetationSpritesMinDistance = 1
e_DissolveSpriteMinDist = 2
e_DissolveSpriteDistRatio = 0.1
e_VegetationSpritesBatching = 1
r_VegetationSpritesTexRes = 8
e_VegetationBending = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1
e_ProcVegetation = 0
e_VegetationUseTerrainColor = 1
e_OcclusionCullingViewDistRatio = 0.5
ca_AttachmentCullingRation = 50
es_DebrisLifetimeScale = 0
r_TexBumpResolution = 2
r_DisplacementFactor = 0.4
r_UseMaterialLayers = 2
r_EnvTexUpdateInterval = 1.0
r_TexMinAnisotropy = 0
r_TexMaxAnisotropy = 0
r_DetailTextures = 0
r_DetailDistance = 1
e_Decals = 0
e_DecalsAllowGameDecals = 0
e_DecalsLifeTimeScale = 0
e_DecalsOverlapping = 0
e_DecalsForceDeferred = 0
e_DecalsMerge = 1
e_DecalsScissor = 1
e_DecalsPreCreate = 1
ca_useDecals = 0
r_ColorGrading = 0
r_GlowAnamorphicFlares = 0
r_DepthOfField = 0
r_dofMinZScale = 0
r_dofMinZ = 1
r_DepthOfFieldBokeh = 0
r_DepthOfFieldBokehQuality = 1
r_MotionBlurMaxViewDist = 0
r_RainMaxViewDist_Deferred = 0
r_sunshafts = 0
r_pointslightshafts = 0
r_Coronashafts = 0
r_Coronas = 0
r_Flares = 0
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 0
r_MotionBlurShutterSpeed = 0.001
ca_MotionBlurMovementThreshold = 0.001
r_Reflections = 0
r_ReflectionsQuality = 0
r_HDRRendering = 0
r_HDRTexFormat = 0
r_HDRLevel = 1
r_HDROffset = 10
r_HDRSaturation = 1
r_HDRBrightLevel = 0.0
r_HDRBrightOffset = 8
r_HDRBrightThreshold = 5
r_HDRBloomMul = 0.5
r_HDRGrainAmount = 0
r_HDRBlueShift = 0
r_HDREyeAdaptionCache = 30
r_MSAA = 0
r_MSAA_quality = 0
r_MSAA_samples = 4
r_PostAA = 0
r_PostAAEdgeFilter = 0
r_PostAAInEditingMode = 0
r_PostAAMode = 0
r_SSAO = 0
r_SSAOQuality = 0
r_SSAODownscale = 0
r_SSAOAmount = 1
r_SSAORadius = 1.5
r_SSAOTemporalConvergence = 0.7
r_SSAOContrast = 1
e_TerrainAo = 0
r_TerrainAO_FadeDist = 8
r_ssdo = 0
r_ssdoAmount = 0
r_ssdoAmbientAmount = 0
r_refraction = 0
r_ssreflections = 0
e_GI = 0
e_GIRSMSize = 64
e_GIAmount = 0.25
e_GIMaxDistance = 150
e_GINumCascades = 1
e_GICascadesRatio = 2
e_GIIterations = 2
e_GIOffset = 0.2
e_GIPropagationAmp = 3.3
e_GICache = 0
e_SkyType = 0
e_SkyUpdateRate = 0
e_Shadows = 0
r_ShadowGen = 0
r_ShadowGenMode = 0
e_ShadowsOnAlphaBlend = 0
e_ShadowsMaxTexRes = 4
e_GsmCastFromTerrain = 0 //was 1
e_ShadowsOnWater = 0
e_ShadowsClouds = 0
e_ShadowsMasksLimit = 1
e_ShadowsLodBiasFixed = 1
e_ShadowsLodBiasInvis = 1
r_ShadowBlur = 0
r_ShadowBluriness = 0.1
r_ShadowJittering = 1.5
e_ShadowsCastViewDistRatio = 0.6
e_ShadowsCastViewDistRatioLights = 0.8
e_ShadowsTessellateCascades = 0
r_ShadowsMaskResolution = 2
r_ShadowsMaskDownScale = 1
e_ShadowsAdaptScale = 2.0
e_ShadowsConstBias = 1.0
e_ShadowsSlopeBias = 1
e_GsmRange = 1
e_GsmRangeStep = 1
e_GsmRangeStepExtended = 6
e_GsmCache = 1
e_GsmCacheLodOffset = 1
e_GsmCacheLodOffsetExtended = 6
e_GsmExtendLastLod = 1
e_GsmExtendLastLodIncludeObjects = 0
e_GsmScatterLodDist = 24
r_CloudsUpdateAlways = 0
r_ImpostersDraw = 0
e_ParticlesQuality = 0
e_ParticlesLights = 0
e_ParticlesGI = 0
e_ParticlesDiffCM = 0
e_ParticlesShadows = 0
r_ShadowsParticleNormalEffect = 0
r_ShadowsParticleKernelSize = 0
r_ShadowsAdaptionMin = 0
r_ShadowsAdaptionSize = 0
e_ParticlesMaxDrawScreen = 1
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 0
e_ParticlesObjectCollisions = 0
e_ParticlesPoolSize = 4096
e_ParticlesAnimBlend = 0
r_UseParticlesHalfRes = 2
r_UseParticlesHalfResForce = 1
r_UseSoftParticles = 0
r_UseParticlesRefraction = 0
r_UseParticlesGlow = 0
r_UseParticlesMerging = 0
r_Rain = 0
r_RainAmount = 0
r_RainMaxViewDist_Deferred = 20
e_ParticlesThread = 0
r_UseParticlesMerging = 0
g_breakage_particles_limit = 10
g_joint_breaking = 0
g_tree_cut_reuse_dist = 0
e_FoliageWindActivationDist = 20
e_PhysFoliage = 0
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 10
p_max_object_splashes = 1
p_max_substeps_large_group = 1
p_num_bodies_large_group = 10
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 1
es_MaxPhysDist = 25
es_MaxPhysDistInvisible = 25
sys_preload = 1
i_precache = 1
r_ShadersAsyncCompiling = 3
r_ShadersAsyncMaxThreads = 6
r_ShadersPreactivate = 1
r_ShadersPrecacheAllLights = 1
r_ShadersUseInstanceLookUpTable = 1
e_ParticlesPreload = 1
e_PreloadDecals = 1
e_AutoPrecacheCgfMaxTasks = 16
e_PreloadMaterials = 1
e_StatObjPreload = 1
e_AutoPrecacheCgf = 2
ca_PrecacheAnimationSets = 1
e_PrecacheLevel = 1
r_TexturesWarmup = 0
e_ShadowsResScale = 0.1
r_TessellationTriangleSize = 20
e_DynamicLightsMaxEntityLights = 2
ca_UsePhysics = 0
e_gsmlodsnum = 0
e_ParticlesLod = 0.1
r_FogShadows = 0
e_HwOcclusionCullingWater = 0
e_WaterWaves = 0
e_WaterOceanFFT = 0
r_WaterReflectionsMGPU = 0
r_WaterReflectionsMinVisiblePixelsUpdate = 0
r_WaterReflectionsUseMinOffset = 0
e_WaterTessellationAmountX = 0
e_WaterTessellationAmountY = 0
r_WaterCaustics = 0
r_WaterGodRays = 0
r_WaterReflections = 0
r_WaterReflectionsQuality = 0
e_Tessellation = 0
e_TessellationMaxDistance = 0
r_PostProcessHUD3DCache = 0
d3d9_TripleBuffering = 1
d3d9_TextureFilter = bilinear
//============================ LOD DISSOLVE =====================================
e_Dissolve = 1
e_DissolveDistband = 3
e_DissolveDistMax = 8
e_DissolveDistMin = 2
//============================ TEXTURES STREAMING ===============================
r_TexturesStreaming = 0 //was 2
r_TexturesStreamPoolSize = 192 //disable if r_TexturesStreaming = 2
r_TexturesStreamingMipBias = 4
r_TexturesStreampoolDefragmentation = 2 //0 = Disabled; 1 = CPU; 2 = GPU
//============================ ADDITIONAL SETTINGS ==============================
sys_MaxFPS = 32
r_VSync = 0
gp_option_ShowCockpitGlass = 0
gp_default_cockpit_light = 1
gp_mech_showfps = 1
//============================ FLASH SCALEFORM SETTINGS ========================
sys_flash_edgeaa = 0
sys_flash_static_pool_size = 0
sys_flash_address_space = 98304
sys_flash_allow_reset_mesh_cache = 1
sys_flash_check_filemodtime = 1
sys_flash_curve_tess_error = 24 //[0...8...24...28...32...] <- interesting values
sys_flash_allow_reset_mesh_cache = 1
sys_flash_newstencilclear = 1
//============================ LOD SETTINGS =====================================
e_Lods = 1
e_LodsForceUse = 1
e_LodRatio = 0 //Lower values force LODs to load sooner
e_LodMin = 6 //[0..3...6]
e_TerrainLodRatio = 4 //was 0
e_TerrainTextureLodRatio = 5 //was 0
e_CharLodMin = 1 /was1024
e_LodMinTtris = 0 /was1
e_LodCompMaxSize = 19 //Lower values force the LODs to load sooner //[0.1...1...19]
e_CoverageBufferTerrainLodShift = 0 //[0...100...1024]
r_TextureLodDistanceRatio = -1
//============================ TESTING ==========================================
//p_num_threads = 2
//p_num_jobs = 2
r_WaterTessellationHW = 1
r_Batching = 2
r_BatchType = 0
r_UseHWSkinning = 1
r_UseGSParticles = 0
r_ShadersAsyncCompiling = 0
e_VegetationBending = 0
e_CullVegActivation = 1 /was 20
e_WaterOceanBottom = 0 /was 1
s_MemoryPoolSoundPrimary = 0
s_MemoryPoolSystem = 0
sys_budget_soundCPU = 0
//============================ MODIFIED BY MWO ==================================
e_Wind = 0
r_RainDropsEffect = 0
r_HUDHitEffect = 0
e_LodMax = 3
e_SkyBox = 0
e_ViewDistRatioVegetation = 0
e_TerrainOcclusionCullingVersion = 0
e_TerrainOcclusionCulling = 0
e_TerrainOcclusionCullingPrecision = 0.1
e_TerrainOcclusionCullingPrecisionDistRatio = 1
e_VegetationAlphaBlend = 0
r_TexMinSize = 0
r_TexMaxSize = 4
r_TexResolution = 0.1
e_DecalsHitCache = 0
r_PostProcessEffects = 0
r_PostProcessFilters = 0
r_PostProcessGameFx = 0
r_Glow = 0
r_EyeAdaptationBase = 0.5
r_EyeAdaptationFactor = 0
r_EyeAdaptationSpeed = 0.5
e_Fog = 0
e_FogVolumes = 0
e_ParticlesCullAgainstViewFrustum = 1
e_ParticlesMaxScreenFill = 16
e_ParticlesEmitterPoolSize = 2048
e_AutoPrecacheTerrainAndProcVeget = 1
e_AutoPrecacheTexturesAndShaders = 1
e_Particles = 0
e_WaterOcean = 2
e_WaterVolumes = 0
e_WaterWavesTessellationAmount = 0.5
//============================ DISABLED BY MWO===================================
r_UsePOM = 0
e_LodMinTris = 1
gpu_particle_physics = 1
e_view_dist_ratio_vegetation = 1 //?
e_vegetation_min_size = 2048 //higher = faster
e_vegetation_sprites_distance_ratio = 1 //?
r_TexturesFilteringQuality = 2
r_DetailNumLayers = 1
g_radialBlur = 0
r_silhouettePOM = 0
r_ChromaticAberration = 0
i_particleeffects = 0
r_FogShadowsWater = 0
r_Sharpening = 0
e_ShadowsPoolSize = 256
e_MergedMeshesInstanceDist = 0
r_HDRBloomRatio = 0.000
e_MergedMeshesViewDistRatio = 0
e_particles_thread = 1
e_dynamic_light = 0
e_gsm_lods_num = 0
e_particles_max_emitter_draw_screen = 1
e_particlesmaxemitterdrawscreen = 1
e_particles_lod = 0.1
r_VolumetricFog = 0
e_vegetation_sprites_distance_ratio = 0.9
e_proc_vegetation = 0
e_ParticlesForceSoftParticles = 0
e_detailmaterialsviewdistz = 1
e_detail_materials_view_dist_z = 1
sys_LowSpecPak = 1
sys_budget_fps = 32
d3d11_TripleBuffering = 1
r_ParticlesHalfRes = 2
e_hw_occlusion_culling_water = 0
r_WaterUpdateChange = 1
d3d9_ClipPlanes = 1
r_TexturesStreamingSkipMips = 2
con_restricted = 0
//============================ CPU THREADS ======================================
sys_main_CPU = 0
sys_TaskThread4_CPU = 0
sys_TaskThread2_CPU = 0
sys_physics_CPU = 1
sys_streaming_CPU = 1
sys_TaskThread5_CPU = 1
ca_thread1Affinity = 1
sys_TaskThread0_CPU = 1
sys_TaskThread3_CPU = 1
ca_thread0Affinity = 1
sys_TaskThread1_CPU = 1
r_WaterUpdateThread = 1
//============================ IN GAME SETTINGS =================================
sys_spec_Environment = 1
sys_spec_GameEffects = 1
sys_spec_ObjectDetail = 1
sys_spec_Particles = 1
sys_spec_PostProcessing = 1
sys_spec_Shading = 1
sys_spec_Shadows = 1
sys_spec_Texture = 1
sys_spec_Physics = 1
sys_spec_Sound = 1
//============================ SYSTEM RAM THROUGHPUT ============================
//sys_budget_streamingthroughput = 6661120 /use "winsat mem" then multiply result by 1024
//sys_LocalMemoryGeometryStreamingSpeedLimit = 6505 /use "winsat mem"
//sys_LocalMemoryTextureStreamingSpeedLimit = 6505 /use "winsat mem"
//sys_streaming_max_bandwidth = 6505 /use "winsat mem"
//============================ KNOWN AND CHECKED ================================
r_MultiGPU = 0
r_MultiThreaded = 1
r_ImpostersUpdatePerFrame = 1000
q_Renderer = 0
e_Clouds = 0
r_WaterUpdateFactor = 20
r_WaterUpdateDistance = 20
r_Beams = 0
r_BeamsMaxSlices = 16
r_BeamsDistFactor = 1
r_TexSkyResolution = 2
r_ImposterRatio = 4
r_EnvTexResolution = 0
r_EnvCMResolution = 0
r_DynTexMaxSize = 24
r_DynTexAtlasCloudsMaxSize = 8
r_DynTexAtlasSpritesMaxSize = 8
r_TexAtlasSize = 256
r_VegetationSpritesTexRes = 8
e_VegetationMinSize = 2048
e_MaxViewDistSpecLerp = 0
e_SkyQuality = 2
e_CoverageBufferReproj = 1
//============================ UNKNOWN AND UNCHECKED ============================
r_GeomInstancing = 1
r_stereodevice = 0
//q_Quality = 0 //sets whole set of quality Shaders to 1 or higher
q_ShaderGeneral = 0
q_ShaderGlass = 0
q_ShaderVegetation = 0
q_ShaderIce = 0
q_ShaderTerrain = 0
q_ShaderShadow = 0
q_ShaderWater = 0
q_ShaderFX = 0
q_ShaderPostProcess = 0
q_ShaderHDR = 0
q_ShaderSky = 0
q_ShaderMetal = 0
e_Recursion = 0
e_HwOcclusionCullingObjects = 0
e_ObjQuality = 0
e_ViewDistMin = 0.1 /was10
e_ViewDistRatio = 0.1 /was19
e_ViewDistRatioCustom = 0.1 /was19
e_ViewDistRatioDetail = 0.1
e_ViewDistRatioLights = 0.1 /was5
r_DrawNearZRange = 0.08
e_TerrainNormalMap = 1
e_TerrainTextureStreamingPoolItemsNum = 16
e_TerrainOcclusionCullingMaxDist = 10
e_TerrainOcclusionCullingStepSize = 4
e_TerrainOcclusionCullingStepSizeDelta = 1.05
e_VegetationSprites = 1
e_VegetationSpritesMinDistance = 1
e_DissolveSpriteMinDist = 2
e_DissolveSpriteDistRatio = 0.1
e_VegetationSpritesBatching = 1
r_VegetationSpritesTexRes = 8
e_VegetationBending = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1
e_ProcVegetation = 0
e_VegetationUseTerrainColor = 1
e_OcclusionCullingViewDistRatio = 0.5
ca_AttachmentCullingRation = 50
es_DebrisLifetimeScale = 0
r_TexBumpResolution = 2
r_DisplacementFactor = 0.4
r_UseMaterialLayers = 2
r_EnvTexUpdateInterval = 1.0
r_TexMinAnisotropy = 0
r_TexMaxAnisotropy = 0
r_DetailTextures = 0
r_DetailDistance = 1
e_Decals = 0
e_DecalsAllowGameDecals = 0
e_DecalsLifeTimeScale = 0
e_DecalsOverlapping = 0
e_DecalsForceDeferred = 0
e_DecalsMerge = 1
e_DecalsScissor = 1
e_DecalsPreCreate = 1
ca_useDecals = 0
r_ColorGrading = 0
r_GlowAnamorphicFlares = 0
r_DepthOfField = 0
r_dofMinZScale = 0
r_dofMinZ = 1
r_DepthOfFieldBokeh = 0
r_DepthOfFieldBokehQuality = 1
r_MotionBlurMaxViewDist = 0
r_RainMaxViewDist_Deferred = 0
r_sunshafts = 0
r_pointslightshafts = 0
r_Coronashafts = 0
r_Coronas = 0
r_Flares = 0
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 0
r_MotionBlurShutterSpeed = 0.001
ca_MotionBlurMovementThreshold = 0.001
r_Reflections = 0
r_ReflectionsQuality = 0
r_HDRRendering = 0
r_HDRTexFormat = 0
r_HDRLevel = 1
r_HDROffset = 10
r_HDRSaturation = 1
r_HDRBrightLevel = 0.0
r_HDRBrightOffset = 8
r_HDRBrightThreshold = 5
r_HDRBloomMul = 0.5
r_HDRGrainAmount = 0
r_HDRBlueShift = 0
r_HDREyeAdaptionCache = 30
r_MSAA = 0
r_MSAA_quality = 0
r_MSAA_samples = 4
r_PostAA = 0
r_PostAAEdgeFilter = 0
r_PostAAInEditingMode = 0
r_PostAAMode = 0
r_SSAO = 0
r_SSAOQuality = 0
r_SSAODownscale = 0
r_SSAOAmount = 1
r_SSAORadius = 1.5
r_SSAOTemporalConvergence = 0.7
r_SSAOContrast = 1
e_TerrainAo = 0
r_TerrainAO_FadeDist = 8
r_ssdo = 0
r_ssdoAmount = 0
r_ssdoAmbientAmount = 0
r_refraction = 0
r_ssreflections = 0
e_GI = 0
e_GIRSMSize = 64
e_GIAmount = 0.25
e_GIMaxDistance = 150
e_GINumCascades = 1
e_GICascadesRatio = 2
e_GIIterations = 2
e_GIOffset = 0.2
e_GIPropagationAmp = 3.3
e_GICache = 0
e_SkyType = 0
e_SkyUpdateRate = 0
e_Shadows = 0
r_ShadowGen = 0
r_ShadowGenMode = 0
e_ShadowsOnAlphaBlend = 0
e_ShadowsMaxTexRes = 4
e_GsmCastFromTerrain = 0 //was 1
e_ShadowsOnWater = 0
e_ShadowsClouds = 0
e_ShadowsMasksLimit = 1
e_ShadowsLodBiasFixed = 1
e_ShadowsLodBiasInvis = 1
r_ShadowBlur = 0
r_ShadowBluriness = 0.1
r_ShadowJittering = 1.5
e_ShadowsCastViewDistRatio = 0.6
e_ShadowsCastViewDistRatioLights = 0.8
e_ShadowsTessellateCascades = 0
r_ShadowsMaskResolution = 2
r_ShadowsMaskDownScale = 1
e_ShadowsAdaptScale = 2.0
e_ShadowsConstBias = 1.0
e_ShadowsSlopeBias = 1
e_GsmRange = 1
e_GsmRangeStep = 1
e_GsmRangeStepExtended = 6
e_GsmCache = 1
e_GsmCacheLodOffset = 1
e_GsmCacheLodOffsetExtended = 6
e_GsmExtendLastLod = 1
e_GsmExtendLastLodIncludeObjects = 0
e_GsmScatterLodDist = 24
r_CloudsUpdateAlways = 0
r_ImpostersDraw = 0
e_ParticlesQuality = 0
e_ParticlesLights = 0
e_ParticlesGI = 0
e_ParticlesDiffCM = 0
e_ParticlesShadows = 0
r_ShadowsParticleNormalEffect = 0
r_ShadowsParticleKernelSize = 0
r_ShadowsAdaptionMin = 0
r_ShadowsAdaptionSize = 0
e_ParticlesMaxDrawScreen = 1
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 0
e_ParticlesObjectCollisions = 0
e_ParticlesPoolSize = 4096
e_ParticlesAnimBlend = 0
r_UseParticlesHalfRes = 2
r_UseParticlesHalfResForce = 1
r_UseSoftParticles = 0
r_UseParticlesRefraction = 0
r_UseParticlesGlow = 0
r_UseParticlesMerging = 0
r_Rain = 0
r_RainAmount = 0
r_RainMaxViewDist_Deferred = 20
e_ParticlesThread = 0
r_UseParticlesMerging = 0
g_breakage_particles_limit = 10
g_joint_breaking = 0
g_tree_cut_reuse_dist = 0
e_FoliageWindActivationDist = 20
e_PhysFoliage = 0
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 10
p_max_object_splashes = 1
p_max_substeps_large_group = 1
p_num_bodies_large_group = 10
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 1
es_MaxPhysDist = 25
es_MaxPhysDistInvisible = 25
sys_preload = 1
i_precache = 1
r_ShadersAsyncCompiling = 3
r_ShadersAsyncMaxThreads = 6
r_ShadersPreactivate = 1
r_ShadersPrecacheAllLights = 1
r_ShadersUseInstanceLookUpTable = 1
e_ParticlesPreload = 1
e_PreloadDecals = 1
e_AutoPrecacheCgfMaxTasks = 16
e_PreloadMaterials = 1
e_StatObjPreload = 1
e_AutoPrecacheCgf = 2
ca_PrecacheAnimationSets = 1
e_PrecacheLevel = 1
r_TexturesWarmup = 0
e_ShadowsResScale = 0.1
r_TessellationTriangleSize = 20
e_DynamicLightsMaxEntityLights = 2
ca_UsePhysics = 0
e_gsmlodsnum = 0
e_ParticlesLod = 0.1
r_FogShadows = 0
e_HwOcclusionCullingWater = 0
e_WaterWaves = 0
e_WaterOceanFFT = 0
r_WaterReflectionsMGPU = 0
r_WaterReflectionsMinVisiblePixelsUpdate = 0
r_WaterReflectionsUseMinOffset = 0
e_WaterTessellationAmountX = 0
e_WaterTessellationAmountY = 0
r_WaterCaustics = 0
r_WaterGodRays = 0
r_WaterReflections = 0
r_WaterReflectionsQuality = 0
e_Tessellation = 0
e_TessellationMaxDistance = 0
r_PostProcessHUD3DCache = 0
d3d9_TripleBuffering = 1
d3d9_TextureFilter = bilinear
//============================ LOD DISSOLVE =====================================
e_Dissolve = 1
e_DissolveDistband = 3
e_DissolveDistMax = 8
e_DissolveDistMin = 2
//============================ TEXTURES STREAMING ===============================
r_TexturesStreaming = 0 //was 2
r_TexturesStreamPoolSize = 192 //disable if r_TexturesStreaming = 2
r_TexturesStreamingMipBias = 4
r_TexturesStreampoolDefragmentation = 2 //0 = Disabled; 1 = CPU; 2 = GPU
//============================ ADDITIONAL SETTINGS ==============================
sys_MaxFPS = 32
r_VSync = 0
gp_option_ShowCockpitGlass = 0
gp_default_cockpit_light = 1
gp_mech_showfps = 1
//============================ FLASH SCALEFORM SETTINGS ========================
sys_flash_edgeaa = 0
sys_flash_static_pool_size = 0
sys_flash_address_space = 98304
sys_flash_allow_reset_mesh_cache = 1
sys_flash_check_filemodtime = 1
sys_flash_curve_tess_error = 24 //[0...8...24...28...32...] <- interesting values
sys_flash_allow_reset_mesh_cache = 1
sys_flash_newstencilclear = 1
//============================ LOD SETTINGS =====================================
e_Lods = 1
e_LodsForceUse = 1
e_LodRatio = 0 //Lower values force LODs to load sooner
e_LodMin = 6 //[0..3...6]
e_TerrainLodRatio = 4 //was 0
e_TerrainTextureLodRatio = 5 //was 0
e_CharLodMin = 1 /was1024
e_LodMinTtris = 0 /was1
e_LodCompMaxSize = 19 //Lower values force the LODs to load sooner //[0.1...1...19]
e_CoverageBufferTerrainLodShift = 0 //[0...100...1024]
r_TextureLodDistanceRatio = -1
//============================ TESTING ==========================================
//p_num_threads = 2
//p_num_jobs = 2
r_WaterTessellationHW = 1
r_Batching = 2
r_BatchType = 0
r_UseHWSkinning = 1
r_UseGSParticles = 0
r_ShadersAsyncCompiling = 0
e_VegetationBending = 0
e_CullVegActivation = 1 /was 20
e_WaterOceanBottom = 0 /was 1
s_MemoryPoolSoundPrimary = 0
s_MemoryPoolSystem = 0
sys_budget_soundCPU = 0
//============================ MODIFIED BY MWO ==================================
e_Wind = 0
r_RainDropsEffect = 0
r_HUDHitEffect = 0
e_LodMax = 3
e_SkyBox = 0
e_ViewDistRatioVegetation = 0
e_TerrainOcclusionCullingVersion = 0
e_TerrainOcclusionCulling = 0
e_TerrainOcclusionCullingPrecision = 0.1
e_TerrainOcclusionCullingPrecisionDistRatio = 1
e_VegetationAlphaBlend = 0
r_TexMinSize = 0
r_TexMaxSize = 4
r_TexResolution = 0.1
e_DecalsHitCache = 0
r_PostProcessEffects = 0
r_PostProcessFilters = 0
r_PostProcessGameFx = 0
r_Glow = 0
r_EyeAdaptationBase = 0.5
r_EyeAdaptationFactor = 0
r_EyeAdaptationSpeed = 0.5
e_Fog = 0
e_FogVolumes = 0
e_ParticlesCullAgainstViewFrustum = 1
e_ParticlesMaxScreenFill = 16
e_ParticlesEmitterPoolSize = 2048
e_AutoPrecacheTerrainAndProcVeget = 1
e_AutoPrecacheTexturesAndShaders = 1
e_Particles = 0
e_WaterOcean = 2
e_WaterVolumes = 0
e_WaterWavesTessellationAmount = 0.5
//============================ DISABLED BY MWO===================================
r_UsePOM = 0
e_LodMinTris = 1
gpu_particle_physics = 1
e_view_dist_ratio_vegetation = 1 //?
e_vegetation_min_size = 2048 //higher = faster
e_vegetation_sprites_distance_ratio = 1 //?
r_TexturesFilteringQuality = 2
r_DetailNumLayers = 1
g_radialBlur = 0
r_silhouettePOM = 0
r_ChromaticAberration = 0
i_particleeffects = 0
r_FogShadowsWater = 0
r_Sharpening = 0
e_ShadowsPoolSize = 256
e_MergedMeshesInstanceDist = 0
r_HDRBloomRatio = 0.000
e_MergedMeshesViewDistRatio = 0
e_particles_thread = 1
e_dynamic_light = 0
e_gsm_lods_num = 0
e_particles_max_emitter_draw_screen = 1
e_particlesmaxemitterdrawscreen = 1
e_particles_lod = 0.1
r_VolumetricFog = 0
e_vegetation_sprites_distance_ratio = 0.9
e_proc_vegetation = 0
e_ParticlesForceSoftParticles = 0
e_detailmaterialsviewdistz = 1
e_detail_materials_view_dist_z = 1
sys_LowSpecPak = 1
sys_budget_fps = 32
d3d11_TripleBuffering = 1
r_ParticlesHalfRes = 2
e_hw_occlusion_culling_water = 0
r_WaterUpdateChange = 1
d3d9_ClipPlanes = 1
r_TexturesStreamingSkipMips = 2
Edited by G4LV4TR0N, 09 May 2017 - 03:09 AM.
#54
Posted 28 April 2017 - 06:55 PM
multisoul, on 28 April 2017 - 12:24 AM, said:
be very careful using options that come from other versions of cryengine, because nearly all of them, are from forks which are later/newer than MWO ....
G4LV4TR0N, on 28 April 2017 - 01:03 AM, said:
I got special low-req config here, it's bit different and made for dual core CPU's. If anybody wants to try or care to review:
your provided 'user.cfg' has options in it that are not from our engine also ...
d3d9_ClipPlanes = 1 gpu_particle_physics = 1don't exist in the engine, and should throw an error ... as they don't exist, its just an extra wasted line that has to be parsed, fail, and write an error about it ... all of which should be done within 1ms ... but ... still ... try changine
e_CoverageBufferReproj = 0to 1, which enables simple reprojection, which kinda desyncs the coverage buffer to be one frame behind, say, you calculate it 'this' frame, and the next frame, instead of waiting for the calculation to come back, just use the previous frame, and use the current one for the next frame ...
g_showFPS = 1should be
gp_mech_showfps = 1assuming that you want the fps shown by default ...
#55
-
-
- The Solitary
- 911 posts
Member
Posted 28 April 2017 - 08:13 PM
Thanks. Whole "Disabled By MWO" section is dead anyway, but some options were used by MWO in past and PGI has just disabled them at some point. I am keeping them in cfg file and check log file after each patch to see if they were enabled again because some were causing drastic changes.
By the way, I found out that my cfg files has "e_CoverageBufferReproj" twice, first time with "0" and second time with "1" because I have forgot to remove earlier entry. I guess that config is being read from top to bottom and in such case "0" was overwritten by "1", right?
Also, do you know anything about those settings that I have in "Texture Streaming", "Flash Scaleform" or "Lod Settings" sections?
By the way, I found out that my cfg files has "e_CoverageBufferReproj" twice, first time with "0" and second time with "1" because I have forgot to remove earlier entry. I guess that config is being read from top to bottom and in such case "0" was overwritten by "1", right?
Also, do you know anything about those settings that I have in "Texture Streaming", "Flash Scaleform" or "Lod Settings" sections?
Edited by G4LV4TR0N, 28 April 2017 - 08:24 PM.
#56
Posted 03 May 2017 - 03:34 AM
G4LV4TR0N, on 28 April 2017 - 01:03 AM, said:
yes values 'later' in the file will overwrite the cvar, assuming your able to change it in the first place ...
personally I never messed much with the texture streaming system ... and have always left it at 0, it might help early load related stuttering, but doesn't make a detectable difference at my end
in the flash settings, the tessellation error probably gives the most noticeable effect, imagine bending a line into a circle, and the tessellation is how many corners we put onto it to make us visually believable its a circle, and the error is how many of those corners we don't process, to save on time ... its not something that's overused though, so going for the max value, probably wont yield much results ...
if your trying to increase performance on a lower end machine, I would change these to values ...
e_TerrainLodRatio = 4 -- 4) super low! / 3) normal low / 2) med/high / 1) really high / 0) mixed results e_TerrainTextureLodRatio = 5 -- 5) normal low spec / 2) med spec / 1) high spec
#57
-
-
- The Solitary
- 911 posts
Member
Posted 09 May 2017 - 01:20 AM
Thanks, updated config post.
Tesselation error is value is causing some HUD elements to disappear when used with higher values. Those are probably minor things, but after "24" or so your targeting rectangle loses dot and does not look like a square anymore.
I do wonder because I have certain lines copied from other configs, one of them is:
e_GsmCastFromTerrain = 1
But from what I know it should be 0 or disabled for performance. Additionally as shadows are completely disabled this variable shouldn't even matter, am I correct? What about this one?
r_PostProcessHUD3DCache = 0
And is this one important? For me it makes things displayed much better, one of few things I got in config that ain't set to lowest value. Somehow similar to Object Detail slidebar in options:
e_LodCompMaxSize = 19
Tesselation error is value is causing some HUD elements to disappear when used with higher values. Those are probably minor things, but after "24" or so your targeting rectangle loses dot and does not look like a square anymore.
I do wonder because I have certain lines copied from other configs, one of them is:
e_GsmCastFromTerrain = 1
But from what I know it should be 0 or disabled for performance. Additionally as shadows are completely disabled this variable shouldn't even matter, am I correct? What about this one?
r_PostProcessHUD3DCache = 0
And is this one important? For me it makes things displayed much better, one of few things I got in config that ain't set to lowest value. Somehow similar to Object Detail slidebar in options:
e_LodCompMaxSize = 19
Edited by G4LV4TR0N, 09 May 2017 - 03:10 AM.
#58
-
-
- Big Daddy
- 997 posts
Member
- LocationInside a straightjacket
Posted 09 August 2017 - 09:00 PM
Wow, i got drunk one night then i fiddled with a bunch of user.cfgs and lazily and drunkenly mashed em together, somehow I got a performance boost.
Then I threw the thing into this thread thinking, "hey, maybe the few people that stumble across this old lost thread can make some use out of it."
I didn't realize how many people would go looking at the thread; and I haven't payed any attention to the thread, for that, I am sorry. I will sit down some time this week and go through the user.cfg and repair it. And i will carefully read all the information that you contributed.
Also, i am somewhat pleased that i messed it up because you guys put some interesting stuff in your comments that are really useful. I'm Just a dude trying to collect anything that can be used for performance. I really appreciate the help.
Then I threw the thing into this thread thinking, "hey, maybe the few people that stumble across this old lost thread can make some use out of it."
I didn't realize how many people would go looking at the thread; and I haven't payed any attention to the thread, for that, I am sorry. I will sit down some time this week and go through the user.cfg and repair it. And i will carefully read all the information that you contributed.
Also, i am somewhat pleased that i messed it up because you guys put some interesting stuff in your comments that are really useful. I'm Just a dude trying to collect anything that can be used for performance. I really appreciate the help.
Edited by Dillion Harper, 09 August 2017 - 09:09 PM.
#59
-
-
- The Fighter
- 25 posts
Member
Posted 13 August 2017 - 12:21 AM
I have i7 6700HQ and GTX 1060 6gb (it's exactly the same as desktop version, with slightly lower clock)
I can run almost anything on very high setting at res 1080p for 60 fps but somehow in this game it runs at 30 40 fps no matter what the setting is...
I can run almost anything on very high setting at res 1080p for 60 fps but somehow in this game it runs at 30 40 fps no matter what the setting is...
#60
-
-
- Big Daddy
- 997 posts
Member
- LocationInside a straightjacket
Posted 17 August 2017 - 07:46 AM
xxSilverWolfxx, on 13 August 2017 - 12:21 AM, said:
I have i7 6700HQ and GTX 1060 6gb (it's exactly the same as desktop version, with slightly lower clock)
I can run almost anything on very high setting at res 1080p for 60 fps but somehow in this game it runs at 30 40 fps no matter what the setting is...
I can run almost anything on very high setting at res 1080p for 60 fps but somehow in this game it runs at 30 40 fps no matter what the setting is...
They put a bunch of load on the cpu. It would be interesting if they put all the multiplayer/network stuff onto a second exe that would run along side the main exe. Then we could put the network exe onto a virtual ram buffer thingy(cant remember what its called).
10 user(s) are reading this topic
0 members, 10 guests, 0 anonymous users
