When You Buff The Mg, Please Do It Properly
#301
Posted 11 January 2013 - 07:20 PM
#302
Posted 11 January 2013 - 08:25 PM
Well I'm done with my ramblings.
#303
Posted 11 January 2013 - 09:50 PM
Mahws, on 11 January 2013 - 06:00 PM, said:
Omni mechs will be restricted in the number of weapons they can equip, just not the type. Anything else would be a disastrous, game breaking, pay2win farce.
Omni mechs will be balanced by the fact that you cannot alter engine rating/type, armor allocation/type or fixed equipment including non-intergral heatsinks. In my opinion those are huge disadvantages for most builds. Only the Stormcrow and Timberwolf are anything near optimized platforms. That Hellbringer can streakboat all it wants but it still has paper thin armor. If they ever implement a proper engine damage model the Clan advantage will recede even further.
Look at the Nova Prime. You don't have that many criticals to work with if you start swaping out lasers for heatsinks. Even boated ER smalls would carry a heavy heat burden under the MWO heat system.
Edited by Spheroid, 11 January 2013 - 10:19 PM.
#304
Posted 12 January 2013 - 06:14 PM
Don't get me wrong, I don't think hard point number limitations is going to fix the impending balance *********** either (a 3 UAC-20 Daishi comes to mind), but if they're hoping to retain any sense of balance it's going to have to be something that avoids both small weapon boating and large weapon flexibility.
As far as I can see the only way to avoid that problem is to put a cap on both the number of weapons and total slots used for each pod. Any other method and you may as well toss out half the games content and tip any semblance of balance on top of it.
#305
Posted 14 January 2013 - 03:17 PM
Quote
What does that mean to you? After I've completed my first pass at multiplier numbers and after it goes through testing, you will notice that the Machine Gun will become a formidable weapon when used against a component that has no armor. Basically it will start to shred items that are mounted on the targeted component.
I doubt it, unless that multiplier is larger than 20-25x.
#306
Posted 14 January 2013 - 03:39 PM
i use the mg in my cata as target sytem for the ac5u
if the mg fire hit the target then i start fire the ac5u. so that was not so bad and 2nd good thing is many mechs are scarry about the sound and runs away, was funny to see ^^
#307
Posted 14 January 2013 - 03:59 PM
#308
Posted 14 January 2013 - 04:08 PM
Congzilla, on 09 January 2013 - 06:32 AM, said:
Congzilla, on 09 January 2013 - 06:32 AM, said:
Except that it was, and there were no infantry or light armor when the game was introduced....those came months later.
#309
Posted 14 January 2013 - 06:24 PM
stjobe, on 14 January 2013 - 03:17 PM, said:
I doubt it, unless that multiplier is larger than 20-25x.
So...it'll still be useless as far as I'm readin there. Cool.
And to think I actually got excited when they said they'd buff machine guns and flamers. They sure showed me.
#310
Posted 15 January 2013 - 01:17 AM
#311
Posted 15 January 2013 - 01:51 AM
I hate to say this, but I have the impressions the Devs just aren't good at math or modelling. Is it up to the community again to come up with models of their crit system and showing what crit multipliers will do or not do?
Edited by MustrumRidcully, 15 January 2013 - 01:52 AM.
#312
Posted 15 January 2013 - 07:17 AM
MustrumRidcully, on 15 January 2013 - 01:51 AM, said:
I hate to say this, but I have the impressions the Devs just aren't good at math or modelling. Is it up to the community again to come up with models of their crit system and showing what crit multipliers will do or not do?
I think the exact opposite is true. The devs are very good at math and modelling, they are just very bad at actually playing the game. Or rather they play it very rarely. You cant model the fact that unarmored mechs are not very common on the battlefield, and that by the time any mech is stripped of its armor it is already dead.
Edited by KerenskyClone, 15 January 2013 - 07:17 AM.
#313
Posted 15 January 2013 - 07:56 AM
KerenskyClone, on 15 January 2013 - 07:17 AM, said:
I think the exact opposite is true. The devs are very good at math and modelling, they are just very bad at actually playing the game. Or rather they play it very rarely. You cant model the fact that unarmored mechs are not very common on the battlefield, and that by the time any mech is stripped of its armor it is already dead.
This seems more likely to me as well. Though to be fair I think that is pretty common with most game devs.
#314
Posted 15 January 2013 - 08:16 AM
Boogie Man, on 15 January 2013 - 07:56 AM, said:
This seems more likely to me as well. Though to be fair I think that is pretty common with most game devs.
Most game developers are no different than any other developers; when you spend all day developing something, that something isn't the first thing on your mind to actually use when you get some free time.
I.e. when you spend all day busting your behind to implement some feature of a game, you probably don't want to play the game when you get off work, no matter how proud you are of your game, or how good it is. More likely you just want home to your SO and/or get some food into your system.
I can see them playing once in a while, but not constantly like some of us
#315
Posted 15 January 2013 - 09:03 AM
KerenskyClone, on 15 January 2013 - 07:17 AM, said:
I think the exact opposite is true. The devs are very good at math and modelling, they are just very bad at actually playing the game. Or rather they play it very rarely. You cant model the fact that unarmored mechs are not very common on the battlefield, and that by the time any mech is stripped of its armor it is already dead.
I think you can model that, actually.
A mech has x points of armor and y points of internal and a component has z hit points.
The likelihood of a component taking damage is equal to [Crit Slots Used by Component]/][Crit Slots used up in Hit Location].
A weapon deals darmor and dcrit
xmax/y = 4. (You can carry up to 4 times the internal armour value as armour per hit location.)
So, if you deal darmour, it can take up to 4*y / darmour to get to the internals, where dcrit becomes relevant. So you spend up to 80 % of your time not dealing damage to internals and not needing critical hits. So you have 20 % of the time to destroy a component. Destroying a component may have various effects, but let's say for example you destroy a weapon and lower's the enemy damage output. But of course, killing a hit location will also take away that weapon's damage (and possibly multiple weapon's damage).
So for a weapon to be worth being really bad regular damage but good at criticals, you need to overcome the penalty of being bad 80 % of the time by compensating being much better the other 20 % of the time - basically you must destroy the enemies weapon so much faster in that 20 % time frame that being able to kill the entire enemy more quickly (which also takes out all other weapons) will net you more taken damage. That sounds like an incredibly unlikely proposition.
And we shouldn't forget that the MGs are still some of the worst weapons for taking out components, because the damage comes in so many small damage packages that the damage is likely to be spread across the enemy. Basically in the worst case, you will deal ~8 % of your dcrit to each component. If dcrit = darmour that basically requires that the hit location must have 8 times as many hit points as the item or you will destroy the hit location before any item. (The real case is not that bad, because not all crit slots are filled, and most items will need more than one crit slot. But it's still bad.)
An AC/10 or PPC (not exactly one of the best weapos on the block) will simply destroy a component per crit, even if they get no extra mutliplier. And when I equip an AC/10 or a PPC, I know that I can spend the 1 ton of MG much better on a heat sink or extra AC/10 ammo...
Edited by MustrumRidcully, 15 January 2013 - 09:04 AM.
#316
Posted 15 January 2013 - 09:07 AM
MustrumRidcully, on 15 January 2013 - 01:51 AM, said:
Or, maybe, they have a grasp of a greater picture than the majority of us see or can fathom.
Until you see the results in action, stop doubting ...
Edited by Novawrecker, 15 January 2013 - 09:08 AM.
#318
Posted 15 January 2013 - 09:12 AM
stjobe, on 09 January 2013 - 05:44 AM, said:
Which is why we are testing both
#320
Posted 15 January 2013 - 09:33 AM
Garth Erlam, on 15 January 2013 - 09:12 AM, said:
Thanks for chiming in with some hard facts, Garth. Could you possibly divulge what kind of damage buff you're testing? It seemed in the last Command Chair post that a damage buff wasn't on the table; that you were going only for the crit buff?
8 user(s) are reading this topic
0 members, 8 guests, 0 anonymous users