372 replies to this topic

[BladeXXL]

Goose, on 10 February 2014 - 03:50 PM, said:

I know what I should ask: Anyone here know the way to set the front ends' framerate limit?

For veeeery poor systems:
sys_MaxFPS = 39

For all the others:
sys_MaxFPS = 59

[ATao]

Did anyone manage to figure out which commands are working and which are not? Want to filter out useless lines off my user.cfg.

Edited by Alexander Malthus, 11 February 2014 - 05:13 AM.

[Goose]

That wasn't my quistion, BladeXXL, but thanks anyways.

In fact: I'd done a few tests on my l'ill HTPC, and suspect any dual-core must set an sys_MaxFPS to ether 45 or half their monitors' refresh; Convetional Wisdom about First Person Shooters (the descent of Simulations) goes "you want a minimum of 45;" I would add you want any framerate of 45 or less to be steady. Steadiness becomes much less important as framereate goes up …

At any rate: If your cores, or card for that matter, is redlined in the Training Grounds, set a framerate limit …

[Corvus Antaka]

MnDragon, on 04 February 2014 - 08:09 PM, said:

I just read the dmp file and the Omicron file and I got this:

Initializing AI System
[Warning] Unknown command: cl_joystick_gain
[Warning] Unknown command: cl_joystick_sensitivity
[Warning] Unknown command: cl_joystick_throttle_range
[Warning] Unknown command: cl_joystick_invert_throttle
[Warning] Unknown command: cl_joystick_invert_pitch
[Warning] Unknown command: cl_joystick_invert_yaw
[Warning] Unknown command: cl_joystick_invert_turn
[Warning] Unknown command: cl_joystick_deadzone
[Warning] Unknown command: cl_fov

So did they disable the .cfg again?

Folks, just because it says "unknown command" doesnt actually mean its not working.

cl_fov = generates "unknown command", but it still works.

the only way i can tell really is making adjustments and then checking visuals in match or training grounds.

[CMIRKO]

Hi all,

it seems that I can't download a particular user config pack from lower link
http://www.terrantit...les/usercfg.rar

is there any other place I can try and get this pack from ?


cheers

[9H3X6]

Same error here on latest download...Going to try the shared spoiler few pages back. Thanks for efforts.

Really felt PGI was going to get a film grain toggle option in the UI 2.0. Bummer. 3050 high dev bunny ear saga continues. Just look at the quality of that static!

[Corvus Antaka]

9H3X6, on 13 February 2014 - 12:47 AM, said:

Same error here on latest download...Going to try the shared spoiler few pages back. Thanks for efforts.

Really felt PGI was going to get a film grain toggle option in the UI 2.0. Bummer. 3050 high dev bunny ear saga continues. Just look at the quality of that static!

CMIRKO, on 12 February 2014 - 11:48 PM, said:

Hi all,

it seems that I can't download a particular user config pack from lower link
http://www.terrantit...les/usercfg.rar

is there any other place I can try and get this pack from ?


cheers

I'm looking into this now.

Those of you with ATI cards may want to try the new 14.1 BETA drivers

[Corvus Antaka]

The user cfg package is again working you can download the package from here.

Nothing is gaurenteed to work right now. Nothing in this package afaik violates the TOS. You use this at your own risk, as always.

www.terrantitans.com/files/usercfg.rar

[CMIRKO]

thanks mate

[Wintersdark]

Alexander Malthus, on 11 February 2014 - 05:12 AM, said:

Did anyone manage to figure out which commands are working and which are not? Want to filter out useless lines off my user.cfg.

Colonel Pada Vinson, on 11 February 2014 - 05:30 PM, said:

Folks, just because it says "unknown command" doesnt actually mean its not working.

cl_fov = generates "unknown command", but it still works.

However, with certain other commands that don't work, the cl_fov stops working. It's actually IMHO a good way to test commands. If your FOV reverts to normal, the other command isn't working. I'm not sure if MWO just ignores the user.cfg entirely if there's a command that's not allowed or if it just stops using the cl_fov, but there's that anyways.

[JudgeDeathCZ]

Wintersdark, on 10 February 2014 - 04:58 PM, said:

What, after the patch, you where able to disable film grain?! HOW?!

I used col. Pada config files.It is BladeXXLs patch I think.

[Itsalrightwithme]

Colonel Pada Vinson, on 13 February 2014 - 08:31 PM, said:

The user cfg package is again working you can download the package from here.

Nothing is gaurenteed to work right now. Nothing in this package afaik violates the TOS. You use this at your own risk, as always.

www.terrantitans.com/files/usercfg.rar

Thanks for sharing this, Colonel!

[Wintersdark]

JudgeDeathCZ, on 17 February 2014 - 11:28 AM, said:

I used col. Pada config files.It is BladeXXLs patch I think.

Huh. I had a that same patch (at least I think it's the same) from some time ago, but it was disabled a few patches back. Will give this a go - Getting rid of that hideous film grain if nothing else will make me happier.

Now, if I can just get post processing to actually turn off, so I don't have that enraging softness to everything and blur... *sighs*

[Corvus Antaka]

Quote

Video options are fully functional again. So take some time to reset your options.

try the user.cfg again folks. looks like graphics options have been fixed.

[Yazleb]

Thanks for the work Pada! mwo <3 u

[Lianesch ZA]

Colonel Pada Vinson, on 13 February 2014 - 08:31 PM, said:

The user cfg package is again working you can download the package from here.

Nothing is gaurenteed to work right now. Nothing in this package afaik violates the TOS. You use this at your own risk, as always.

www.terrantitans.com/files/usercfg.rar

Thanks Pada

[Shamous13]

This thread needs to be pinned!!!

[P Hocto]

Hey guys. Quick question about the user.cfg file.

I can't seem to get mine to work. I'm using the Col Pada cfg files and while FOV changes do work, graphic changes don't seem to do anything.

I wasn't sure if it was doing anything at first so I set the graphics in game normally to low, got a high fps, quit the game, installed the highest grade Pada cfg file but when I load it up again I still get low graphics setting and a high fps, when my computer shouldn't be able to handle high settings very well at all really.

Would love a bit of help as I really like fine tuning things until they're exactly where I want them, which isn't possible with the normal in game graphics controls.

Cheers!

Edited by P Hocto, 02 March 2014 - 09:11 AM.

[Corvus Antaka]

P Hocto, on 02 March 2014 - 09:10 AM, said:

Hey guys. Quick question about the user.cfg file.

I can't seem to get mine to work. I'm using the Col Pada cfg files and while FOV changes do work, graphic changes don't seem to do anything.

I wasn't sure if it was doing anything at first so I set the graphics in game normally to low, got a high fps, quit the game, installed the highest grade Pada cfg file but when I load it up again I still get low graphics setting and a high fps, when my computer shouldn't be able to handle high settings very well at all really.

Would love a bit of help as I really like fine tuning things until they're exactly where I want them, which isn't possible with the normal in game graphics controls.

Cheers!

run the repair tool. delete the cache folder under user/shaders. try again.

your naming the file with your config user.cfg i hope.

make sure ingame video is set to ultra high, all options to ultra high, post-processing to low.

post here again if it's still not working.

Edited by Colonel Pada Vinson, 02 March 2014 - 05:14 PM.

[P Hocto]

Thanks for the help. Unfortunately it didn't seem to do any good.

I set in game video to Ultra high except for post-processing as you said. Then I ran the repair tool, deleted the cache, and tried the high cfg file you gave (renamed to user.cfg). Went into the game, got about 27fps on canyon network training ground. Seemed ok but to make sure it was working I ran the repair tool again, deleted the cache and tried the low cfg file. No difference when I loaded it back up, still getting 27fps on canyon network and it looks mostly the same, although my powers of perception are weak as hell.

I'm guessing this isn't normal behaviour? Surely I should have a very noticeable difference in FPS between both extremes of config files? I think I'm aiming for around medium anyway but using the extremes seems like a good way to troubleshoot this.

The user.cfg file in general must be working as fov changes do work.

Thanks for being so helpful!

Edited by P Hocto, 03 March 2014 - 01:56 PM.