284 replies to this topic

[JudgeDeathCZ]

Well i have acces to Crysis 3 alpha test so I can give you guys acc to test out cvars on that game(same engine) but i think it already runs on DX11 so it will not be so helpful :s .
But ure right we need some kind of benchmark or just sandbox mode where we can test out .cfg file and mech...and devs should stop to lock on ours config options(i mean locked .xml values :x .

[Angelos Sanguinum]

Colonel Pada Vinson, on 30 November 2012 - 10:09 PM, said:

I wonder if you might be right. I seem to get better visuals & fps seem equal with PGI low vs my custom user.cfg file, custom file seems glitchy.
we really need a smart efficient way to plug values from the custom user.cfg file to nail down better graphics & visuals with quality performance if indeed this is causing us problems.

sys_spec_Shadows.cfg that I compiled from yours is outdated too after latest serverside fixes it caused slight fps drops so i switched back to user.cfg, still I must use BladeXXL's sys_spec_Shadows.cfg to turn Shadows off.
I believe its Postprocessing screwing some graphic commands. If I turn HDR off its all dark and unplayable with lowest fps. When I put into user.cfg edited engine's low settings for postprocessing along with other commands 1 man experienced constant startup crashes, and I got 1 crash too. So now I deleted sys_spec_PostProcessing.cfg until next patch, and deleted all PostProcessing commands except this part :
;-----------PostProcessing
r_DepthOfField = 0
r_HDRGrainAmount = 0
r_MotionBlurMaxViewDist = 0

Can't get more than 25 fps in action no matter what.

Edited by Angelos Sanguinum, 01 December 2012 - 02:49 PM.

[Varjen]

BladeXXL, i think you just made my week!

I still havent finished tweaking the setup and i went through some interesting phases getting the hang of it but i have decent to fair FPS again!
I have been one of those unfortunates that suffered ever decreasing FPS as the patches came and went and i was ready to call it quits for a while there...

But i have seen the light! (actually i managed to turn it OFF in the settings, that was interesting to try and play with all lightsources off)
Ill post my spec here if i find it decent enough for public use.

[BladeXXL]

Good to hear Varjen

I've updated my Hi-End config in the topic, finally finding the reason for the crushed looking buildings (especially on River City)
It was the missing e_LodRatio = 20 ... no idea when I lost it... but now everything is fine!

...looking forward for the upcoming patch...

[August55]

Are there any cvars regarding the hud? Because it's hogging my fps. I tried all the tweaks in the thread and the only thing that helps for me is turning off the hud, which is weird.

http://mwomercs.com/...oves-framerate/

[mekabuser]

I deleted my user config file.... Is there a way to restore it? Or am i just stupid and forgot where to put user config file?

[Onyx Rain]

OK I was doing some tweaks to my user.cfg...and for some reason now I can't run task manager without shutting my game down. So I can't switch it to run the mwo.exe file in realtime...I have the regedit for high priority, but realtime seems to work better....can't hit control alt del now without shutting my game down....i used to be able to even after I installed the regedit thing so I don't think that is the cause. I even reinstalled the entire game and am running stock files....still can't cntrl alt del without shutting entire game down.

Any ideas?

Edited by Onyx Rain, 06 December 2012 - 12:36 AM.

[BladeXXL]

@mekabuser:
...\Piranha Games\MechWarrior Online\user.cfg

@Onyx Rain:
Realtime? really? Undo that! You ask for support for things that are NOT provided here - devs don't like threads making trouble. Think about it!

Idea: Delete the Cache and CVarGroups_MWO folder!

[Onyx Rain]

BladeXXL, on 06 December 2012 - 12:49 AM, said:

@mekabuser:
...\Piranha Games\MechWarrior Online\user.cfg

@Onyx Rain:
Realtime? really? Undo that! You ask for support for things that are NOT provided here - devs don't like threads making trouble. Think about it!

Idea: Delete the Cache and CVarGroups_MWO folder!

Somehow I fixed it....why not realtime? Seems to work better then High for me. I asked here because it happened while tweaking user.cfg. Making trouble?

[BladeXXL]

Onyx Rain, on 06 December 2012 - 01:34 AM, said:

Somehow I fixed it....why not realtime? Seems to work better then High for me. I asked here because it happened while tweaking user.cfg. Making trouble?

</p>

For me - it did! I had delays and interrupts in TS3. There is no need for realtime, if no other process forces a higher priority! If you have other over normal prio processes... you should close them before gaming.

[TheFlayedman]

I just used this config i extracted it to the right directory and it caused me to crash to desktop in every match. Ive deleted it now and no more crashes.

[BladeXXL]

TheFlayedman, on 06 December 2012 - 05:28 AM, said:

I just used this config i extracted it to the right directory and it caused me to crash to desktop in every match. Ive deleted it now and no more crashes.

Are you just trolling?
...or can you tell me which config you'd put into your user.cfg (low, hi, Yaros, your own?) ...

Love such guys... ^^

[GrabbleRus]

TheFlayedman, on 06 December 2012 - 05:28 AM, said:

I just used this config i extracted it to the right directory and it caused me to crash to desktop in every match. Ive deleted it now and no more crashes.

T_T Facepalm

[garrosh1980]

so hello!
i need help i have a duocore 2.2ghz geforce gt240 and a need a user cfg who works fine can some one help me i have this colonel pada user cfg

;Default 3 -
;
;========================================================================================================
;*********************************Independantly added items*********************************************
;default high settings
;r_MultiThreaded = 1
;r_GeomInstancing=1
;e_decals=1
;e_DecalsHitCache=1
e_particles_thread = 1
gpu_particle_physics = 1
gp_mech_sound_system_disable_bitchinbetty = 0
;Field of View inside Cockpit (Default:75)
cl_fov = 85
;Mouse Options
i_mouse_smooth = 0
i_mouse_accel=0
;mouse speed (working - 0.1 - windows mouse at 6 notch, 1200 dpi mouse raise/lower as needed)
cl_sensitivity = 0.2
;MSAA fix for ATI - toggle as needed.
r_PostMSAA = 0
r_PostMSAAMode = 0
r_FSAA = 0
=================================================================================================
;Environment
e_WaterOceanFFT = 1
e_WaterTessellationAmount = 1
e_WaterTessellationAmountX = 10
e_WaterTessellationAmountY = 10
e_WaterTessellationSwathWidth = 10
r_WaterCaustics = 0
r_WaterReflections = 0
r_WaterReflectionsQuality = 0
r_WaterReflectionsMinVisiblePixelsUpdate = 0
r_WaterTessellationHW = 0
r_WaterUpdateDistance = 0
r_WaterUpdateFactor = 0
e_DynamicLightsMaxEntityLights = 8
e_GI = 1
e_GIAmount = 0.6
e_GIMaxDistance = 50
e_GINumCascades = 2
e_SkyType = 1
e_SkyUpdateRate = 0
e_TerrainAo = 0
e_TerrainNormalMap = 0
e_VegetationUseTerrainColor = 1
r_DetailDistance = 0
r_DetailTextures = 1
r_ssdo = 0
r_SSAO = 0
r_SSAOQuality = 0
r_SSAODownscale = 0
r_refraction = 0
r_SSReflections = 0
r_Beams = 3
r_BeamsDistFactor = 0.05
r_BeamsMaxSlices = 64
e_Clouds = 0
r_CloudsUpdateAlways = 0
r_Reflections = 0
;GameEffects
i_lighteffects = 1
g_ragdollUnseenTime = 2
g_ragdollMinTime = 8
g_ragdollDistance = 15
;ObjectDetail
e_ObjQuality = 1
e_DecalsAllowGameDecals = 1
e_DecalsLifeTimeScale = 2
e_DecalsOverlapping = 1
e_Dissolve = 2
e_LodRatio = 10
e_Lods = 1
e_LodMin = 0
e_MaxViewDistSpecLerp = 1
e_OcclusionCullingViewDistRatio = 1
e_ProcVegetation = 1
e_streamCgf = 0
e_VegetationBending = 1
e_VegetationMinSize = 0
e_VegetationSpritesDistanceCustomRatioMin = 0.6
e_VegetationSpritesDistanceRatio = 1
e_ViewDistMin = 10
e_ViewDistRatio = 100
e_ViewDistRatioCustom = 100
e_ViewDistRatioDetail = 50
e_ViewDistRatioLights = 40
e_ViewDistRatioVegetation = 30
e_TerrainDetailMaterialsViewDistXY = 1536
e_TerrainDetailMaterialsViewDistZ = 128
e_TerrainOcclusionCullingMaxDist = 0
ca_AttachmentCullingRation = 100
ca_DrawFaceAttachments = 1
ca_useDecals = 1
es_DebrisLifetimeScale = 0.6
i_rejecteffects = 1
e_Tessellation = 0
e_DecalsForceDeferred = 1
r_DrawNearZRange = 0.06
;Particles
e_ParticlesQuality = 2
e_ParticlesLights = 1
e_ParticlesMaxScreenFill = 64
e_ParticlesMinDrawPixels = 1.5
e_ParticlesMotionBlur = 0
e_ParticlesObjectCollisions = 1
r_UseParticlesHalfRes = 1
r_UseSoftParticles = 1
;Physics
g_breakage_particles_limit = 120
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0
e_CullVegActivation = 0
e_FoliageWindActivationDist = 0
e_PhysFoliage = 0
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 4000
p_max_object_splashes = 3
p_max_substeps_large_group = 3
p_num_bodies_large_group = 50
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 4
es_MaxPhysDist = 50
es_MaxPhysDistInvisible = 15
;PostProcessing
r_ColorGrading = 0
r_DepthOfField = 0
r_EyeAdaptationBase = 0.1
r_EyeAdaptationFactor = 0.85
r_EyeAdaptationSpeed = 4
r_GlowAnamorphicFlares = 1
r_HDRBloomMul = 0.9
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.95
r_HDRBrightOffset = 10
r_HDRBrightThreshold = 6
r_HDREyeAdaptionCache = 10
r_HDRGrainAmount = 0
r_HDRLevel = 3
r_HDROffset = 10
r_HDRRendering = 1
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 0
r_PostProcessHUD3DCache = 30
r_RainMaxViewDist_Deferred = 0
r_Sunshafts = 1
r_UseEdgeAA = 0
;Shading
q_Renderer = 3
q_ShaderFX = 3
q_ShaderGeneral = 3
q_ShaderGlass = 3
q_ShaderHDR = 3
q_ShaderIce = 3
q_ShaderMetal = 3
q_ShaderPostProcess = 2
q_ShaderShadow = 3
q_ShaderSky = 3
q_ShaderTerrain = 3
q_ShaderVegetation = 3
q_ShaderWater = 3
;Shadows
e_Shadows = 0
e_GsmCache = 0
e_GsmLodsNum = 0
e_GsmRange = 0
e_ParticlesShadows = 0
e_ShadowsCastViewDistRatio = 0
e_ShadowsMaxTexRes = 0
e_ShadowsOnAlphaBlend = 0
e_ShadowsResScale = 0
e_ShadowsTessellateCascades = 0
r_ShadowBlur = 0
r_ShadowJittering = 0
r_ShadowsPCFiltering = 0
r_ShadowsUseClipVolume = 0
r_FogShadows = 0
;Sound
s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1
;Textures
r_DynTexAtlasCloudsMaxSize = 32
r_DynTexAtlasSpritesMaxSize = 32
r_DynTexMaxSize = 50
r_EnvCMResolution = 1
r_EnvTexResolution = 1
r_EnvTexUpdateInterval = 1
r_ImposterRatio = 1
r_TexSkyResolution = 0
r_TexAtlasSize = 1024
r_TexMinAnisotropy = 0
r_TexBumpResolution = 0
r_TexResolution = 0
r_VegetationSpritesTexRes = 32
r_TexturesStreaming = 0

and the frames ****** up maybe 8fps maximum 20 someone pls help me
thx

[Ellenai]

;Mouse Options
i_mouse_smooth = 0
i_mouse_accel=0
;mouse speed (working - 0.1 - windows mouse at 6 notch, 1200 dpi mouse raise/lower as needed)



DO not use this one when u got installed your controller drivers etc. Logitech setpoint.

[garrosh1980]

i have in this option doppel sirro.maybe cvar delet maybe more fps pls help someone me,the setting from game options from high to low is this a option

[Angelos Sanguinum]

garrosh1980, on 08 December 2012 - 04:18 AM, said:

i need help i have a duocore 2.2ghz geforce gt240 and a need a user cfg who works fine can some one help me i have this colonel pada user cfg
and the frames ****** up maybe 8fps maximum 20 someone pls help me
thx

Your fps zreezing because its cfg for older patch, its outdated.
I have patch that works for old Dual-core CPU just fine. All you need is backup your user.cfg then unpack archive to MechWarrior Online\ and set settings to Low :
http://rapidshare.co.../Patch%20v5.rar

Edited by Angelos Sanguinum, 08 December 2012 - 03:50 PM.

[plaguebreath]

Is there any particolar user.cfg mod that will make less painfull and FPS dropping the sound stuttering buzzing problems many of us have ? Any variable or set of instruction to make it at least less annoying (as well as disable betty maybe ?) thank you for the support.

[mekabuser]

Angelos Sanguinum, on 08 December 2012 - 03:49 PM, said:

Your fps zreezing because its cfg for older patch, its outdated.
I have patch that works for old Dual-core CPU just fine. All you need is backup your user.cfg then unpack archive to MechWarrior Online\ and set settings to Low :
http://rapidshare.co.../Patch%20v5.rar

high.
Somethings im just a moron at. I got my user config back up.. tnks blade. I just created the file again, but Im using the low end one from the first page I believe. I was looking through it this morning and I still have shadows which are a resource hog.
Is that config an old one too?
Is there something different about the latest patches when you add user config?
attributes is set to 0 correct?
Sys spec is set to 0 correct.?
Is that it. ?

Ill make a more detailed post later, but all I really want to do is turn off shadows. Something I cant believe isnt done with regular sliders.
I suspect i am... running the user config and the game just runs poorly now.
I get max fps sometimes +60. but any flick of the mouse and it instantly drops in the red.

[plaguebreath]

mekabuser, on 10 December 2012 - 05:38 AM, said:

high.
Somethings im just a moron at. I got my user config back up.. tnks blade. I just created the file again, but Im using the low end one from the first page I believe. I was looking through it this morning and I still have shadows which are a resource hog.
Is that config an old one too?
Is there something different about the latest patches when you add user config?
attributes is set to 0 correct?
Sys spec is set to 0 correct.?
Is that it. ?

Ill make a more detailed post later, but all I really want to do is turn off shadows. Something I cant believe isnt done with regular sliders.
I suspect i am... running the user config and the game just runs poorly now.
I get max fps sometimes +60. but any flick of the mouse and it instantly drops in the red.

Welcome to the party man, have a beer and take a seat