372 replies to this topic

[Scope666]

ArmageddonKnight, on 03 April 2013 - 09:59 AM, said:

Sorry if i didnt make myself clear. I have the grain removal trick done, and distance blur is gone with the setitng at DOF = 2 it seems. My comment was the fact that, withotu the grain and blur ..u can see more clearly and the game looks alot sparser(empty) than it used to.

Ah, perhaps try some of the other user.cfg's in the archive located here: http://terrantitans.com/mwo-user-cfg

SweetFX also makes things look a LOT better IMHO.

[Corvus Antaka]

Guys with this most recent patch you'll need to lower HDR brightness somewhat and adjust the values down a little bit.

[ArmageddonKnight]

Which of these do u sugest chaning ?
r_HDRBloomMul = 0.6
r_HDRBlueShift = 1.0
r_HDRBrightLevel = 0.75
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6

[Scope666]

These are the "stock" values of "High" from the latest patch, I would try these:



r_HDRBloomMul = 0.7
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.85
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6

[ArmageddonKnight]

Ok i think i can sort out the brightness now.
but

Is there anyway to add or increase the level of AA using the config file
aswell as
Stop/reduce terrain quality pop in ..maybe make it render full detail terrain at a much greater distance, atm the terrain changes shape and quality as close as 150/200m which sucks as u constantly see the image chanigng as ur moving.

[Scope666]

ArmageddonKnight, on 03 April 2013 - 12:26 PM, said:

Ok i think i can sort out the brightness now.
but

Is there anyway to add or increase the level of AA using the config file
aswell as
Stop/reduce terrain quality pop in ..maybe make it render full detail terrain at a much greater distance, atm the terrain changes shape and quality as close as 150/200m which sucks as u constantly see the image chanigng as ur moving.

They recently added this line to Environment, seems to help with the draw distance / popping textures:


[3]
; For high/very high spec, make this number large enough for large maps to avoid terrain texture popping
; For medium/low spec, increasing e_TerrainTextureLodRatio would fix the issue too but will sacrifice texture quality
e_TerrainTextureStreamingPoolItemsNum = 256

[ArmageddonKnight]

IM not sure if half of these cfg options r even working tbh. I tried the one above and it didnt help. Ground is still pop and shifting and changing shape as u move closer.

Think i might forget changing the cfg and put up with bog standard settings, the removal of the grain and the depth blur just makes certain low quality things stick out more, like lack of AA and lack of long distance object/groudn clutter.

[Scope666]

ArmageddonKnight, on 03 April 2013 - 01:08 PM, said:

IM not sure if half of these cfg options r even working tbh. I tried the one above and it didnt help. Ground is still pop and shifting and changing shape as u move closer.

Think i might forget changing the cfg and put up with bog standard settings, the removal of the grain and the depth blur just makes certain low quality things stick out more, like lack of AA and lack of long distance object/groudn clutter.

Yeah, I've always felt the film grain and DOF is meant to hide some things. ;-)

[ArmageddonKnight]

Ill be honest.. when i first heared about MWO and that it was using CryEngine ..i was excited, knowing how awsome crysis looked using the same engine i expected great things.
Alass, a small company has to cater to the lowest common denominator aka, people with old rigs. usualy companies say 'we desing a game to run with equipement of the last 5 years,...which lets face it ..is a long *** time for computers.
Which means low quality graphics. You can add on the eye candy all u like but if the base is made at low quality, ur just putting makeup on it can only help to a certain degree

I hope we can sort out some cfg tweeks to get rid of some of the issues, but atm for meatleast ..thats failed. i'll put back on the beer goggles (film grain effect & depth blur) and deal with it lol

[Corvus Antaka]

my current user.cfg file. this seems to have helped me with both lag and visuals. please try this out and report. this is for medium - higher end rigs - use it with the package found at www.terrantitans.com/mwo-user-cfg

Spoiler

;Field of View inside Cockpit (Default:75)
cl_fov = 85
;Mouse Options
i_mouse_smooth = 0
i_mouse_accel=0
;mouse speed (working - 0.1 - windows mouse at 6 notch, 1200 dpi mouse raise/lower as needed)
cl_sensitivity = 0.1
r_ColorGrading = 2
r_DepthOfField = 0
r_GlowAnamorphicFlares = 1
r_HDRBloomMul = 0.7
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.85
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6
r_HDREyeAdaptionCache = 0
r_HDRGrainAmount = 0
r_HDRLevel = 3
r_HDROffset = 10
r_HDRRendering = 1
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 100
r_PostProcessHUD3DCache = 0
r_RainMaxViewDist_Deferred = 100
r_Sunshafts = 1
q_Renderer = 4
q_ShaderFX = 4
q_ShaderGeneral = 4
q_ShaderGlass = 4
q_ShaderHDR = 4
q_ShaderIce = 4
q_ShaderMetal = 4
q_ShaderPostProcess = 4
q_ShaderShadow = 4
q_ShaderSky = 4
q_ShaderTerrain = 4
q_ShaderVegetation = 4
e_Shadows = 1
e_GsmCache = 0
e_GsmLodsNum = 5
e_GsmRange = 3
e_ParticlesShadows = 1
e_ShadowsCastViewDistRatio = 1
e_ShadowsMaxTexRes = 512
e_ShadowsOnAlphaBlend = 0
e_ShadowsResScale = 3.4
e_ShadowsTessellateCascades = 0
r_ShadowBlur = 2
r_ShadowJittering = 2.5
r_ShadowsPCFiltering = 1
r_ShadowsUseClipVolume = 1
r_FogShadows = 1
s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1
e_WaterOceanFFT = 1
e_WaterTessellationAmount = 10
e_WaterTessellationAmountX = 85
e_WaterTessellationAmountY = 85
e_WaterTessellationSwathWidth = 10
r_WaterCaustics = 1
r_WaterReflections = 1
r_WaterReflectionsQuality = 5
r_WaterReflectionsMinVisiblePixelsUpdate = 0.05
r_WaterTessellationHW = 1
r_WaterUpdateDistance = 0.2
r_WaterUpdateFactor = 0.05
e_DynamicLightsMaxEntityLights = 32
e_GI = 1
e_GIAmount = 0.6
e_GINumCascades = 1
e_SkyType = 1
e_SkyUpdateRate = 1
e_TerrainAo = 1
e_TerrainNormalMap = 1
e_VegetationUseTerrainColor = 1
r_DetailDistance = 8
r_DetailTextures = 1
r_ssdo = 1
r_SSAO = 0
r_SSAOQuality = 2
r_SSAODownscale = 0
r_refraction = 1
r_SSReflections = 3
r_Beams = 3
r_BeamsDistFactor = 0.01
r_BeamsMaxSlices = 300
e_Clouds = 1
r_CloudsUpdateAlways = 1
r_Reflections = 1
e_GsmRangeStep = 4
sys_spec_Quality=4
e_TerrainTextureStreamingPoolItemsNum = 256
e_GsmCastFromTerrain = 1
i_lighteffects = 1
g_ragdollMinTime = 15
g_ragdollUnseenTime = 3
g_ragdollDistance = 40
e_ObjQuality = 4
e_DecalsAllowGameDecals = 1
e_DecalsLifeTimeScale = 2
e_DecalsOverlapping = 1
e_Dissolve = 2
e_LodRatio = 40
e_Lods = 1
e_LodMin = 0
e_MaxViewDistSpecLerp = 1
e_OcclusionCullingViewDistRatio = 1
e_ProcVegetation = 1
e_streamCgf = 0
e_VegetationBending = 1
e_VegetationMinSize = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1.5
e_ViewDistMin = 10
e_ViewDistRatio = 100
e_ViewDistRatioCustom = 100
e_ViewDistRatioDetail = 100
e_ViewDistRatioLights = 100
e_ViewDistRatioVegetation = 100
e_TerrainDetailMaterialsViewDistXY = 2048
e_TerrainDetailMaterialsViewDistZ = 128
e_TerrainOcclusionCullingMaxDist = 200
ca_AttachmentCullingRation = 300
ca_DrawFaceAttachments = 1
ca_useDecals = 1
es_DebrisLifetimeScale = 1
i_rejecteffects = 1
e_Tessellation = 1
e_DecalsForceDeferred = 1
r_DrawNearZRange = 0.08
e_ParticlesQuality = 4
e_ParticlesLights = 1
e_ParticlesMaxScreenFill = 160
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 1
e_ParticlesObjectCollisions = 2
r_UseParticlesHalfRes = 0
r_UseSoftParticles = 1
g_breakage_particles_limit = 160
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0
e_CullVegActivation = 50
e_FoliageWindActivationDist = 25
e_PhysFoliage = 2
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 6000
p_max_object_splashes = 3
p_max_substeps_large_group = 5
p_num_bodies_large_group = 100
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 4
es_MaxPhysDist = 200
es_MaxPhysDistInvisible = 25
r_DynTexAtlasCloudsMaxSize = 64
r_DynTexAtlasSpritesMaxSize = 64
r_DynTexMaxSize = 320
r_EnvCMResolution = 2
r_EnvTexResolution = 3
r_EnvTexUpdateInterval = 0.001
r_ImposterRatio = 1
r_TexSkyResolution = 0
r_TexAtlasSize = 2048
r_TexMinAnisotropy = 8
r_TexBumpResolution = 0
r_TexResolution = 0
r_TexturesStreaming = 0
r_VegetationSpritesTexRes = 128

Edited by Colonel Pada Vinson, 04 April 2013 - 08:00 AM.

[Kamelkaze]

Does the modified user.cfg helping against the rainbow polygons?

[Corvus Antaka]

Kamelkaze, on 04 April 2013 - 10:08 AM, said:

Does the modified user.cfg helping against the rainbow polygons?

no idea. i have no reason to think it does, but its worth a try

[Kamelkaze]

Colonel Pada Vinson, on 04 April 2013 - 11:37 AM, said:

no idea. i have no reason to think it does, but its worth a try

with the "medium shadow on user cfg" from your download i had no rainbow polygons in the last hour. but i will continue testing.

but now i have big snapping problems and a lot of server connection losts.. hmmmmpfff

Edited by Kamelkaze, 05 April 2013 - 03:28 PM.

[Corvus Antaka]

Kamelkaze, on 05 April 2013 - 02:57 PM, said:

with the "medium shadow on user cfg" from your download i had no rainbow polygons in the last hour. but i will continue testing.

but now i have big snapping problems and a lot of server connection losts.. hmmmmpfff

haha my snapping 7 rubberbanding went away when i put the custom files back inplace on a clean re-install..today it came back a little bit here and there though..and my ping is like 10ms.

[Kamelkaze]

At the moment it works fine. Funny...

[Kamelkaze]

damnit, still have the bug

[Lightfoot]

Colonel Pada Vinson, on 20 March 2013 - 11:52 AM, said:

go into attributes.xml and change brightness/contrast from 0.5 to a higher value. I use 0.6.

With the patch that added the new version of the vision modes, Contrast and Brightness were set to 0.0 and no longer seem to work. Any workaround?

[Corvus Antaka]

Lightfoot, on 07 April 2013 - 07:41 AM, said:

With the patch that added the new version of the vision modes, Contrast and Brightness were set to 0.0 and no longer seem to work. Any workaround?

I noticed this too Lightfoot. I assume PGI locked this down to prevent vision abuse? The sliders shifted as well. Lets wait a patch or 2 and go from there

[Zerberus]

Colonel Vinson, I thank you from the depths of my black soul.

I have tried everything imaginable under the sun to raise my framerates, which should be ok to start with (gtx 560, x4 840, 8 gnb ram). But nothing I could do would get me above 15 with occasional dips to 9. Ironically, this was only with SweetFX, w/o my frames actually dropped another 1 or 2.

Your low eng config from page 1 allows me to get stable 25 frames with SweetFX . I am a very happy (non-) camper at this point, and it is exclusively thanks to you

Edited by Zerberus, 24 April 2013 - 01:24 PM.

[Fraustie]

Don't forget ... sys_MaxFPS = 60