372 replies to this topic

[darkfall13]

This is quite neat, +1000 internets, and surprisingly I went balls to the wall and just went straight to the "ultra.high.maxed.user.cfg" and... I get better fps lmfao. I've been tweaking things in it to my own liking, but what settings causes the blur? What I'm particularly talking about is during the start-up sequence the wording on the panels blur, or if you twist around you can see it then too. I figured it would have been "r_MotionBlur = 1" to "= 0" would have been it, but I still get it.

[Corvus Antaka]

Make sure you turn OFF motionblur in the ingame options. thats how you get rid of it 100%.

NEW USER.CFG - using crytek commands from the recent Crysis 3 game.

WHY? Attempt to fix texture popping and improve visual fidelity.

TESTING STAGE? 1 drop so far.

Use at your own risk. only for high end machines. Once more testing is done I will expound, for now if you want to test and report back do so here.

Spoiler

;Field of View inside Cockpit (Default:75)
cl_fov = 85
;Mouse Options
i_mouse_smooth = 0
i_mouse_accel=0
;mouse speed (working - 0.1 - windows mouse at 6 notch, 1200 dpi mouse raise/lower as needed)
cl_sensitivity = 0.1
r_ColorGrading = 0
r_DepthOfField = 0
r_GlowAnamorphicFlares = 1
r_HDRBloomMul = 0.6
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.75
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6
r_HDREyeAdaptionCache = 0
r_HDRGrainAmount = 0
r_HDRLevel = 3
r_HDROffset = 10
r_HDRRendering = 1
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 100
r_PostProcessHUD3DCache = 0
r_RainMaxViewDist_Deferred = 100
r_Sunshafts = 1
q_Renderer = 4
q_ShaderFX = 4
q_ShaderGeneral = 4
q_ShaderGlass = 4
q_ShaderHDR = 4
q_ShaderIce = 4
q_ShaderMetal = 4
q_ShaderPostProcess = 4
q_ShaderShadow = 4
q_ShaderSky = 4
q_ShaderTerrain = 4
q_ShaderVegetation = 4
e_Shadows = 1
e_GsmCache = 0
e_GsmLodsNum = 5
e_GsmRange = 3
e_ParticlesShadows = 1
e_ShadowsCastViewDistRatio = 1
e_ShadowsMaxTexRes = 512
e_ShadowsOnAlphaBlend = 0
e_ShadowsResScale = 4.0
e_ShadowsTessellateCascades = 0
r_ShadowBlur = 2
r_ShadowJittering = 2.5
r_ShadowsPCFiltering = 1
r_ShadowsUseClipVolume = 1
r_FogShadows = 1
e_ShadowsPoolSize = 2048
s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1

r_WaterVolumeCausticsDensity = 256
r_WaterVolumeCausticsRes = 1024
r_WaterVolumeCausticsMaxDist = 35
e_WaterOceanFFT = 1
e_WaterTessellationAmount = 10
e_WaterTessellationAmountX = 85
e_WaterTessellationAmountY = 85
e_WaterTessellationSwathWidth = 10
r_WaterCaustics = 1
r_WaterReflections = 1
r_WaterReflectionsQuality = 5
r_WaterReflectionsMinVisiblePixelsUpdate = 0.05
r_WaterTessellationHW = 1
r_WaterUpdateDistance = 0.2
r_WaterUpdateFactor = 0.05
e_DynamicLightsMaxEntityLights = 32
e_GI = 1
e_GIAmount = 0.6
e_GINumCascades = 1
e_GIMaxDistance = 100
e_SkyType = 1
e_SkyUpdateRate = 1
e_TerrainAo = 1
e_TerrainNormalMap = 1
e_VegetationUseTerrainColor = 1
r_DetailDistance = 8
r_DetailTextures = 1
r_ssdo = 2
r_SSDOAmount = 0.8
r_SSDOAmbientAmount = 1.1
r_SSAO = 0
r_SSAOQuality = 3
r_SSAODownscale = 0
r_refraction = 1
r_SSReflections = 3
r_Beams = 3
r_BeamsDistFactor = 0.01
r_BeamsMaxSlices = 300
e_Clouds = 1
r_CloudsUpdateAlways = 1
r_Reflections = 1
e_GsmRangeStep = 4
sys_spec_Quality=4
e_TerrainTextureStreamingPoolItemsNum = 256
e_GsmCastFromTerrain = 1

i_lighteffects = 1
g_ragdollMinTime = 15
g_ragdollUnseenTime = 3
g_ragdollDistance = 40
e_ObjQuality = 4
e_DecalsAllowGameDecals = 1
e_DecalsLifeTimeScale = 2
e_DecalsOverlapping = 1
e_Dissolve = 2
e_LodRatio = 40
e_Lods = 1
e_LodMin = 0
e_MaxViewDistSpecLerp = 1
e_OcclusionCullingViewDistRatio = 1
e_ProcVegetation = 1
e_streamCgf = 0
e_VegetationBending = 1
e_VegetationMinSize = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1.5
e_ViewDistMin = 10
e_ViewDistRatio = 100
e_ViewDistRatioCustom = 100
e_ViewDistRatioDetail = 100
e_ViewDistRatioLights = 100
e_ViewDistRatioVegetation = 100
e_TerrainDetailMaterialsViewDistXY = 2048
e_TerrainDetailMaterialsViewDistZ = 128
e_TerrainOcclusionCullingMaxDist = 200
ca_AttachmentCullingRation = 300
ca_DrawFaceAttachments = 1
ca_useDecals = 1
es_DebrisLifetimeScale = 1
i_rejecteffects = 1
e_Tessellation = 1
e_DecalsForceDeferred = 1
r_DrawNearZRange = 0.08
e_ParticlesQuality = 4
e_ParticlesLights = 1
e_ParticlesMaxScreenFill = 160
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 1
e_ParticlesObjectCollisions = 2
r_UseParticlesHalfRes = 0
r_UseSoftParticles = 2
g_breakage_particles_limit = 160
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0
e_CullVegActivation = 50
e_FoliageWindActivationDist = 25
e_PhysFoliage = 2
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 6000
p_max_object_splashes = 3
p_max_substeps_large_group = 5
p_num_bodies_large_group = 100
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 4
es_MaxPhysDist = 200
es_MaxPhysDistInvisible = 25
r_DynTexAtlasCloudsMaxSize = 64
r_DynTexAtlasSpritesMaxSize = 64
r_DynTexMaxSize = 80
r_EnvCMResolution = 2
r_EnvTexResolution = 3
r_EnvTexUpdateInterval = 0.001
r_ImposterRatio = 1
r_TexSkyResolution = 0
r_TexAtlasSize = 2048
r_TexMinAnisotropy = 8
r_TexBumpResolution = 0
r_TexResolution = 0
r_TexturesStreaming = 0
r_VegetationSpritesTexRes = 256
r_TexturesStreamPoolSize = 512
r_Sharpening = 0
r_ChromaticAberration = 1.5
;Controls the internal occlusion culling. You shouldn't need to modify this cvar, ;but if you encounter any popping with rapid moving, experiment with disabling this.
e_CoverageBufferReproj = 0

[F lan Ker]

S!

Gonna give this one a whirl Vinson with the Catalyst 13.4's and see how it works. Reporting back shortly.

[Durant Carlyle]

Tested your new config. Been a long time since I've messed with the User.cfg on my machine.

Commented out the FOV and mouse stuff. I like those defaults just the way they are.

First match Alpine. No difference in textures popping in or visual fidelity. No difference in FPS.
Second match Alpine. Crashed to desktop just after the map loading screen.
Will continue using it for today at least, to see if it affects any maps.

System:
i7-3770K 3.5GHz CPU
16GB 1600 RAM
GTX 680 GPU
256GB SSD
Win7 Pro 64-bit
320.00 Beta drivers
2560x1440 resolution
Very High settings except for Environment and Effects, which are set to Low at the moment

Edit:
Third match River City. Didn't see any difference. Crashed to desktop after match summary screen.

Edited by Durant Carlyle, 01 May 2013 - 08:50 AM.

[armitage]

I no longer have a user.cfg file since the latest patch, are you guys just creating one?

[darkfall13]

armitage, on 01 May 2013 - 09:37 AM, said:

I no longer have a user.cfg file since the latest patch, are you guys just creating one?

Yeah I did a fresh install to try to remedy some bugs and apparently PGI doesn't put one in anymore, just make a new one from a text file.

[Corvus Antaka]

Durant Carlyle, on 01 May 2013 - 08:41 AM, said:

Tested your new config. Been a long time since I've messed with the User.cfg on my machine.

Commented out the FOV and mouse stuff. I like those defaults just the way they are.

First match Alpine. No difference in textures popping in or visual fidelity. No difference in FPS.
Second match Alpine. Crashed to desktop just after the map loading screen.
Will continue using it for today at least, to see if it affects any maps.

System:
i7-3770K 3.5GHz CPU
16GB 1600 RAM
GTX 680 GPU
256GB SSD
Win7 Pro 64-bit
320.00 Beta drivers
2560x1440 resolution
Very High settings except for Environment and Effects, which are set to Low at the moment

Edit:
Third match River City. Didn't see any difference. Crashed to desktop after match summary screen.

Do you have these crashes without the custom file as well? Your rigs more capable than mine, I havent had any crash troubles yet (beyond the usual random crashing/glitches). Also, if you guys want try turing ONLY postAA on in options (all others should say "OFF" and see if your AA improves)

make sure you delete the cache folder.

try commenting out

e_CoverageBufferReproj = 0

r_TexturesStreamPoolSize = 512

r_WaterVolumeCausticsDensity = 256

r_WaterVolumeCausticsRes = 1024

and/or

s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1


e_ShadowsPoolSize = 2048

and see if that stabilizes it, if you could run another 5 matches first to see if it really is this new file or not first would be great.

Edited by Colonel Pada Vinson, 01 May 2013 - 01:18 PM.

[Durant Carlyle]

Yes, I had the crashes before -- for the past couple of weeks. But never that quickly and that frequently. Usually, it happens about every five matches or so. I reboot after every crash, whether it's to desktop or I have to kill it manually. So in this case, I rebooted, had one match and crashed immediately. Never done that before.

To reduce variables, I have done a clean re-install of the Nvidia WHQL 314.22 drivers. It might be something with the Beta 320s.

Edited by Durant Carlyle, 01 May 2013 - 03:55 PM.

[Durant Carlyle]

Some errors I noticed in Omicron:


[Error] Error: ConsoleVariableGroup 'sys_spec_environment' key 'e_TerrainLodRatio' is not missing in default
[Error] Error: ConsoleVariableGroup 'sys_spec_environment' key 'e_TerrainTextureLodRatio' is not missing in default
[Error] Error: ConsoleVariableGroup 'sys_spec_environment' key 'e_TerrainTextureLodRatio' is not missing in default
[Error] Error: ConsoleVariableGroup 'sys_spec_environment' key 'e_TerrainTextureStreamingPoolItemsNum' is not missing in default
[Error] Error: ConsoleVariableGroup 'sys_spec_environment' key 'sys_spec_Quality' is not missing in default
[Error] Error: ConsoleVariableGroup 'sys_spec_environment' key 'r_ssreflections' is not missing in default
[Error] Error: ConsoleVariableGroup 'sys_spec_environment' key 'e_TerrainTextureStreamingPoolItemsNum' is not missing in default
[Error] Error: ConsoleVariableGroup 'sys_spec_postprocessing' key 'r_UseEdgeAA' is not missing in default

Also:

[Warning] Unknown command: e_ShadowsPoolSize

[Warning] Unknown command: r_WaterVolumeCausticsDensity
[Warning] Unknown command: r_WaterVolumeCausticsRes
[Warning] Unknown command: r_WaterVolumeCausticsMaxDist
[Warning] Unknown command: r_WaterTessellationHW
[Warning] Unknown command: sys_spec_Quality

[Warning] Unknown command: i_lighteffects
[Warning] Unknown command: g_ragdollMinTime
[Warning] Unknown command: g_ragdollUnseenTime
[Warning] Unknown command: g_ragdollDistance
[Warning] Unknown command: i_rejecteffects

[Warning] Unknown command: r_Sharpening
[Warning] Unknown command: r_ChromaticAberration

These have nothing to do with user.cfg, but are interesting nonetheless:

[Error] Runaway thread
[Error] [UIAction] HUD (0): UIElement does not have object _root.mcMain.mcCurrentLayout.mcSpecHud.SetName
[Error] locomotion-group not found: animations/mechs/jagermech/lmg_files/flight_fs_1.lmg
[Error] locomotion-group not found: animations/mechs/jagermech/lmg_files/flight_take_off_ltf.lmg
[Error] locomotion-group not found: animations/mechs/jagermech/lmg_files/flight_fs_1_fp.lmg
[Error] locomotion-group not found: animations/mechs/jagermech/lmg_files/flight_take_off_ltf_fp.lmg


[Error] [UIAction] HUD (0): UIElement does not have object _root.mcMain.mcCurrentLayout.mcSpecHud.SetCount
[Error] [UIAction] HUD (0): UIElement does not have object _root.mcMain.mcCurrentLayout.mcSpecHud.SetCount

And this a couple of times:

could not free all buffers from CDevBufferMan!

Interesting stuff...

[Durant Carlyle]

Following this advice:

Scope666, on 03 April 2013 - 12:29 PM, said:

; For high/very high spec, make this number large enough for large maps to avoid terrain texture popping
; For medium/low spec, increasing e_TerrainTextureLodRatio would fix the issue too but will sacrifice texture quality
e_TerrainTextureStreamingPoolItemsNum = 256

I increased the value for that to 2048 and that seems to have greatly lessened the texture popping for me.

Also, based on the warnings in my previous post, I removed all unknown commands.

So far, so good. Several matches, no crashes (knock on wood) and greatly reduced texture popping. Win-win!

For those interested, my exact settings from the Nvidia Control Panel:

AO: Off
AF: App-Con
AA-FXAA: On
AA-GC: On
AA-Mode: App-Con
AA-Setting: App-Con
AA-Trans: App-Con
CUDA-GPUs: All
Max Pre Frames: Use 3D App Setting
M-D/M-G Accel: Single
PowMan Mode: Max Perf
TF-ASO: On
TF-NLOD Bias: Allow
TF-Q: Perf
TF-Tri: On
Thread Opt: On
Trip Buf: On
Vert Sync: Use 3D App Setting

Edited by Durant Carlyle, 01 May 2013 - 06:24 PM.

[Durant Carlyle]

Took six matches, but finally crashed to desktop again. We'll see if the pattern continues. I was hoping the non-Beta drivers might make (more of) a difference...

[Scope666]

Durant Carlyle, on 01 May 2013 - 07:24 PM, said:

Took six matches, but finally crashed to desktop again. We'll see if the pattern continues. I was hoping the non-Beta drivers might make (more of) a difference...

Guys, check out this post on CTD from one of the devs: http://mwomercs.com/...ost__p__2306005

[Corvus Antaka]

Durant,

the unknown command doesnt mean it isnt working. some of the unknowns like FOV and mouse sensitivity obviously work but still give the unknown command error. this is just a cryengine thing i guess.

[F lan Ker]

S!

Seems they work except on River City the "citadel" viewed from upper spawn point. The building is not completely rendered, without the cfg file works normally. I use Very High except Post Processing on LOW.

[SerpentrasD]

Haha with your config I get my first CTD.

Done more matches with your config and I have also a 7870.I don't have the nerve to get a fix for it so I call your cfg a total malfunction. + I dont see any frame drop , maybe because v-sync is every time on.
But whatever this causes only errors for the hud or blackscreens or CTDs.
And thx after back up everything I keep crashing after loading into a match and I play 4h today without your cfg and nothing happened and now I cant play at all.

Love it to DL everything again with my max speed of 350kb/s

Every Clan/Lance mate on my list who play with me, I will tell them to not load this thing. Even the old Ultra High Configs from 2012/10 load the game correctly before.

Edited by SerpentrasD, 04 May 2013 - 01:10 PM.

[GNAARGH]

SerpentrasD, on 04 May 2013 - 04:31 AM, said:

Haha with your config I get my first CTD.

Done more matches with your config and I have also a 7870.I don't have the nerve to get a fix for it so I call your cfg a total malfunction. + I dont see any frame drop , maybe because v-sync is every time on.
But whatever this causes only errors for the hud or blackscreens or CTDs.
And thx after back up everything I keep crashing after loading into a match and I play 4h today without your cfg and nothing happened and now I cant play at all.

Love it to DL everything again with my max speed of 350kb/s

Every Clan/Lance mate on my list who play with me, I will tell them to not load this thing. Even the old Ultra High Configs from 2012/10 load the game correctly before.

I've never had a CTD with any of the cfgs and I've spent a week trying all the high end ones out and tweaking things for my new 7850 crossfire setup...and for months before that I had no issues whatsoever on my old rig with these cfgs.

There is a CTD problem with the game itself currently tho and the devs are aware of it.
See here: http://mwomercs.com/...op-after-5-sec/

I've recommended colonel pada vinson's cfgs to all my friends on Comstar New Avalon TS and they've all said "HUGE improvement, thanks!"

Maybe check out that thread and read up on the logic fallacy called post hoc ergo propter hoc: "after this, therefore because of this" because correlation does not imply causation.

Edited by GNAARGH, 04 May 2013 - 02:05 PM.

[SerpentrasD]

CTD and other bugs come and go after a few patches , true but like I said I played 4h before this day without any reboot or whatever, without that config and after I load the config first the game CTD after the game was done. Second try the HUD total went out , after 1min the HUD go back online but without a grid/coordinations and not the correct direction of the legs>torso also the entire HUD was during this fight flickering and jump from offline to online all the time. Never see this type of bug before and never read anything about that. And after that every time I click on launch when the game is finish with loading the map the game CTD.

Back up the entire folder , don't work and maybe this thing trigger the error for the guys http://mwomercs.com/...op-after-5-sec/ but whatever there is no fix in that topic.

And I also played from the latest upgrade till now without any CTD .

[Corvus Antaka]

Ok for the new May 7th patch here is a stable ultra-high user.cfg file that works with my user.cfg package.

Turn PostAA ON in MWO options after installing package, all else should be off.

So far this patch seems totally stable from 10 drops with this. looks very nice and sharp too. colrgrading off continues to give a greatly improved visual experience, as does disabled DoF and the film grain removal. with maxed smoke effects the game looks so real it is quite cool to watch.

Spoiler

;Field of View inside Cockpit (Default:75)
cl_fov = 85
;Mouse Options
i_mouse_smooth = 0
i_mouse_accel=0
;mouse speed (working - 0.1 - windows mouse at 6 notch, 1200 dpi mouse raise/lower as needed)
cl_sensitivity = 0.1
r_ColorGrading = 0
r_DepthOfField = 0
r_GlowAnamorphicFlares = 1
r_HDRBloomMul = 0.6
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.75
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6
r_HDREyeAdaptionCache = 0
r_HDRGrainAmount = 0
r_HDRLevel = 3
r_HDROffset = 10
r_HDRRendering = 1
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 100
r_PostProcessHUD3DCache = 0
r_RainMaxViewDist_Deferred = 100
r_Sunshafts = 1
q_Renderer = 4
q_ShaderFX = 4
q_ShaderGeneral = 4
q_ShaderGlass = 4
q_ShaderHDR = 4
q_ShaderIce = 4
q_ShaderMetal = 4
q_ShaderPostProcess = 4
q_ShaderShadow = 4
q_ShaderSky = 4
q_ShaderTerrain = 4
q_ShaderVegetation = 4
e_Shadows = 1
e_GsmCache = 0
e_GsmLodsNum = 5
e_GsmRange = 3
e_ParticlesShadows = 1
e_ShadowsCastViewDistRatio = 1
e_ShadowsMaxTexRes = 1024
e_ShadowsOnAlphaBlend = 0
e_ShadowsResScale = 4.0
;e_ShadowsTessellateCascades = 0
r_ShadowBlur = 2
r_ShadowJittering = 2.5
r_ShadowsPCFiltering = 1
r_ShadowsUseClipVolume = 1
r_FogShadows = 1
;e_ShadowsPoolSize = 2048
s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1

;r_WaterVolumeCausticsDensity = 256
;r_WaterVolumeCausticsRes = 1024
;r_WaterVolumeCausticsMaxDist = 35
e_WaterOceanFFT = 1
e_WaterTessellationAmount = 10
e_WaterTessellationAmountX = 85
e_WaterTessellationAmountY = 85
e_WaterTessellationSwathWidth = 10
r_WaterCaustics = 1
r_WaterReflections = 1
r_WaterReflectionsQuality = 5
r_WaterReflectionsMinVisiblePixelsUpdate = 0.05
r_WaterTessellationHW = 1
r_WaterUpdateDistance = 0.2
r_WaterUpdateFactor = 0.05
e_DynamicLightsMaxEntityLights = 32
e_GI = 1
e_GIAmount = 0.6
e_GINumCascades = 1
e_GIMaxDistance = 100
e_SkyType = 1
e_SkyUpdateRate = 1
e_TerrainAo = 1
e_TerrainNormalMap = 1
e_VegetationUseTerrainColor = 1
r_DetailDistance = 8
r_DetailTextures = 1
r_ssdo = 1
r_SSDOAmount = 0.8
r_SSDOAmbientAmount = 1.1
r_SSAO = 0
r_SSAOQuality = 3
r_SSAODownscale = 0
r_refraction = 1
r_SSReflections = 3
r_Beams = 3
r_BeamsDistFactor = 0.01
r_BeamsMaxSlices = 300
e_Clouds = 1
r_CloudsUpdateAlways = 1
r_Reflections = 1
e_GsmRangeStep = 4
sys_spec_Quality=4
;e_TerrainTextureStreamingPoolItemsNum = 256
e_GsmCastFromTerrain = 1

i_lighteffects = 1
g_ragdollMinTime = 15
g_ragdollUnseenTime = 3
g_ragdollDistance = 40
e_ObjQuality = 4
e_DecalsAllowGameDecals = 1
e_DecalsLifeTimeScale = 2
e_DecalsOverlapping = 1
e_Dissolve = 2
e_LodRatio = 40
e_Lods = 1
e_LodMin = 0
e_MaxViewDistSpecLerp = 1
e_OcclusionCullingViewDistRatio = 1
e_ProcVegetation = 1
e_streamCgf = 0
e_VegetationBending = 1
e_VegetationMinSize = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1.5
e_ViewDistMin = 10
e_ViewDistRatio = 100
e_ViewDistRatioCustom = 100
e_ViewDistRatioDetail = 100
e_ViewDistRatioLights = 100
e_ViewDistRatioVegetation = 100
e_TerrainDetailMaterialsViewDistXY = 2048
e_TerrainDetailMaterialsViewDistZ = 128
e_TerrainOcclusionCullingMaxDist = 200
ca_AttachmentCullingRation = 300
ca_DrawFaceAttachments = 1
ca_useDecals = 1
es_DebrisLifetimeScale = 1
i_rejecteffects = 1
e_Tessellation = 1
e_DecalsForceDeferred = 1
r_DrawNearZRange = 0.08
e_ParticlesQuality = 4
e_ParticlesLights = 1
e_ParticlesMaxScreenFill = 160
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 1
e_ParticlesObjectCollisions = 2
r_UseParticlesHalfRes = 0
r_UseSoftParticles = 2
g_breakage_particles_limit = 160
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0
e_CullVegActivation = 50
e_FoliageWindActivationDist = 25
e_PhysFoliage = 2
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 6000
p_max_object_splashes = 3
p_max_substeps_large_group = 5
p_num_bodies_large_group = 100
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 4
es_MaxPhysDist = 200
es_MaxPhysDistInvisible = 25
r_DynTexAtlasCloudsMaxSize = 128
r_DynTexAtlasSpritesMaxSize = 128
r_DynTexMaxSize = 80
r_EnvCMResolution = 2
r_EnvTexResolution = 3
r_EnvTexUpdateInterval = 0.001
r_ImposterRatio = 1
r_TexSkyResolution = 0
r_TexAtlasSize = 2048
r_TexMinAnisotropy = 8
r_TexBumpResolution = 0
r_TexResolution = 0
r_TexturesStreaming = 0
r_VegetationSpritesTexRes = 256

e_CoverageBufferReproj = 0

Edited by Colonel Pada Vinson, 07 May 2013 - 06:00 PM.

[M4jk]

Hello Panda,Could you allow the terrantitans site for users from Czech rep, please? I want to try to get more Fps from my Lenovo work laptop (NVS 4200m SH*T ( ), but it tells that users from Czech republic are not allowed to get there ...
Thanks in advance and thank you for your effort!
Edit: now it works, thank you for quick reaction if you did something with it

Edited by M4jk, 09 May 2013 - 03:50 AM.

[Corvus Antaka]

M4jk, on 09 May 2013 - 03:40 AM, said:

Hello Panda,Could you allow the terrantitans site for users from Czech rep, please? I want to try to get more Fps from my Lenovo work laptop (NVS 4200m SH*T ( ), but it tells that users from Czech republic are not allowed to get there ...
Thanks in advance and thank you for your effort!
Edit: now it works, thank you for quick reaction if you did something with it

We sadly had to block a large amount of countries and users due to hackers attacking my servers from Russia/Czech republic, etc. Some IP's forwarded to the FBI for investigation, some from USA even. You can email me at info@terrantitans.com to request a ban removal if you can not access the website.

On a side note, anyone who has been attempting to take down my sites or hack them should be a careful little monkey. I've been around a long time.