7732 replies to this topic

[Sparks Murphey]

Rychard Starheart, on 03 July 2012 - 08:24 PM, said:

Been tryin my had at yalls templates. came up with a few but they all feel.... off.... (besides the fractalization of the camo patterns.)

if I could get some feed back, would be helpful.

Nam Tiger Camo


Recolored Snow Camo to something different


Blue Urban/Russian Camo


Oh, btw, when I tried to do what it showed in the video, on top of what was already done for the Atlas Template(wanted to single out fists, neck armor, and weapons for different texture), it totally buggered the whole template and nothing would work right.

I think part of the "off" feeling you've got is the way the lines of the camo continue even when they're off the 'Mech. It's less of a problem on the Catapult, because of the blob-style of camo that has. On the Centurion, however, you can follow a line of dark green off the autocannon and on to the leg, while the lines on the Stalker appear horizontal on the torso, but continue on the same angle (from the 2D reference of the image) on the legs, when they should actually slant up at the right.

The best way of fixing that would be to divide them up onto separate layers. If you are using Photoshop, clone the camo layer, rotate it to suit a particular limb, then use the polygonal selection tool to crop that new layer down to an area that fits the limb in question. Keep doing that for each area so that the camo flows in roughly the right direction for each section. You can also use the Distort transformation (rather than simple rotation) to get the camo to curve around surface if you feel you've got the time and patience (for example, making the lines bend around the hard edges of the leg). Don't forget to right click on the layer and select "Apply Clipping Mask", if it has been released.

[Hammer07]

Haven't seen a Raven recently. Since I plan to try one out, here is one I made for my merc group
Bravo Whisky Charlie.

It's kind of a tribute to the pilots of the F-105s and F-4s of the 60/70s that flew ECM aircraft to confuse enemy surface to air batteries so their brothers could get through to their objectives. They were called Wild Weasels...

Therefore, I present the BWC Wild Weasel (I'm also kind of a fan of nose art)



Have fun and good hunting.

Hammer07 Out

[Adridos]

Why did you use a Wolf's Dragoons logo there?

[Hammer07]

Adridos, on 04 July 2012 - 06:55 AM, said:

Why did you use a Wolf's Dragoons logo there?

Well, like players that choose a House to serve, Bravo Whisky Charlie is a merc company that is allied with Wolf's Dragoons, basically a 'sub-contractor'. I believe this is discussed in the Merc Recruiting forum...Wolf Alliance if I recall.

I understand MWO has stated players may not claim to be the canon units themselves.

However, I am disappointed that was your only comment on my effort. Truthfully, "that sucks" would have been more helpful
If it offends you, I will remove the post.

[Ciypherr]

Hammer07, on 04 July 2012 - 07:19 AM, said:

Well, like players that choose a House to serve, Bravo Whisky Charlie is a merc company that is allied with Wolf's Dragoons, basically a 'sub-contractor'. I believe this is discussed in the Merc Recruiting forum...Wolf Alliance if I recall.

I understand MWO has stated players may not claim to be the canon units themselves.

However, I am disappointed that was your only comment on my effort. Truthfully, "that sucks" would have been more helpful
If it offends you, I will remove the post.

DON'T take it down mate dont listen to him it is a really good peice

[Threat Doc]

Hammer07, on 04 July 2012 - 07:19 AM, said:

Well, like players that choose a House to serve, Bravo Whisky Charlie is a merc company that is allied with Wolf's Dragoons, basically a 'sub-contractor'. I believe this is discussed in the Merc Recruiting forum...Wolf Alliance if I recall.

I understand MWO has stated players may not claim to be the canon units themselves.

However, I am disappointed that was your only comment on my effort. Truthfully, "that sucks" would have been more helpful
If it offends you, I will remove the post.

Don't you even think about taking that piece of artwork down, Hammer! It has beautiful colors, is very well appointed, and there's not a THING wrong with that wolf's head. I know you put in at least three hours of work on this, if not more, and it shows. Placing Adridos on my ignore list has helped me keep my blood pressure down, perhaps you would be good to do the same.

Adridos... stop with the tourrets, man! Didn't your mama and daddy ever teach you that, if you don't have anything nice to say, don't say it at all? I can understand one or two comments, but just about everything that comes from you is negative in some fashion.

[Adridos]

Hammer07, on 04 July 2012 - 07:19 AM, said:

However, I am disappointed that was your only comment on my effort. Truthfully, "that sucks" would have been more helpful
If it offends you, I will remove the post.

No, in no way. I was just curious.

Sorry if it seemed offensive...

[Ciypherr]

If custom schemes are allowed in game basic but perfect





4th Skye Rangers Lyran Commonwealth

Edited by TaylorMadeGamer, 04 July 2012 - 09:50 AM.

[Reign Death]

Me likey the Jenner paint jobs

[Rychard Starheart]

Sparks Murphey, on 04 July 2012 - 01:25 AM, said:

I think part of the "off" feeling you've got is the way the lines of the camo continue even when they're off the 'Mech. It's less of a problem on the Catapult, because of the blob-style of camo that has. On the Centurion, however, you can follow a line of dark green off the autocannon and on to the leg, while the lines on the Stalker appear horizontal on the torso, but continue on the same angle (from the 2D reference of the image) on the legs, when they should actually slant up at the right. The best way of fixing that would be to divide them up onto separate layers. If you are using Photoshop, clone the camo layer, rotate it to suit a particular limb, then use the polygonal selection tool to crop that new layer down to an area that fits the limb in question. Keep doing that for each area so that the camo flows in roughly the right direction for each section. You can also use the Distort transformation (rather than simple rotation) to get the camo to curve around surface if you feel you've got the time and patience (for example, making the lines bend around the hard edges of the leg). Don't forget to right click on the layer and select "Apply Clipping Mask", if it has been released.

cool, thanks, ill try that.

[Chromoid]

Hammer07, on 04 July 2012 - 06:44 AM, said:

Haven't seen a Raven recently. Since I plan to try one out, here is one I made for my merc group
Bravo Whisky Charlie.

It's kind of a tribute to the pilots of the F-105s and F-4s of the 60/70s that flew ECM aircraft to confuse enemy surface to air batteries so their brothers could get through to their objectives. They were called Wild Weasels...

Therefore, I present the BWC Wild Weasel (I'm also kind of a fan of nose art)



Have fun and good hunting.

Hammer07 Out

IMO, this is by far your most impressive piece, Hammer. Of course, I think the Raven's the sexiest 'Mech currently in the game anyways!

Edited by Chromoid, 04 July 2012 - 11:00 AM.

[Rychard Starheart]

Sparks Murphey, on 04 July 2012 - 01:25 AM, said:

I think part of the "off" feeling you've got is the way the lines of the camo continue even when they're off the 'Mech. It's less of a problem on the Catapult, because of the blob-style of camo that has. On the Centurion, however, you can follow a line of dark green off the autocannon and on to the leg, while the lines on the Stalker appear horizontal on the torso, but continue on the same angle (from the 2D reference of the image) on the legs, when they should actually slant up at the right.

The best way of fixing that would be to divide them up onto separate layers. If you are using Photoshop, clone the camo layer, rotate it to suit a particular limb, then use the polygonal selection tool to crop that new layer down to an area that fits the limb in question. Keep doing that for each area so that the camo flows in roughly the right direction for each section. You can also use the Distort transformation (rather than simple rotation) to get the camo to curve around surface if you feel you've got the time and patience (for example, making the lines bend around the hard edges of the leg). Don't forget to right click on the layer and select "Apply Clipping Mask", if it has been released.

yup. that fixed it. mostly.










Edit:

Hayden, on 06 November 2011 - 06:56 AM, said:

Waco Rangers Jenner. Don't mess with Texas. Never mind that no one in the Waco rangers has probably ever been to Texas, or even possibly heard of it?

ok. going back though your stuff again. for the umpteenth time. just now noticed this one.

Im from Waco, TX. Found the comment really funny. Probably more so due to our towns history. Most folks dont even like to come here (or live here for that matter).

Edited by Rychard Starheart, 04 July 2012 - 03:58 PM.

[Ironhawk]

Hammer07, on 04 July 2012 - 07:19 AM, said:

Well, like players that choose a House to serve, Bravo Whisky Charlie is a merc company that is allied with Wolf's Dragoons, basically a 'sub-contractor'. I believe this is discussed in the Merc Recruiting forum...Wolf Alliance if I recall.

I understand MWO has stated players may not claim to be the canon units themselves.

However, I am disappointed that was your only comment on my effort. Truthfully, "that sucks" would have been more helpful
If it offends you, I will remove the post.

Keep it on. Great work. Post others. Keep the flame alive. You can't expect quick comments in this thread from too many people these days. I guess we're a busy bunch...

Adridos is just commenting on context/lore as it is a passion of his. He does not mean ill. Let's not be too tough on him. He has a part to play in these forums. "Shire... Bagginss..."

[Sparks Murphey]

Hammer07, on 04 July 2012 - 06:44 AM, said:

Haven't seen a Raven recently. Since I plan to try one out, here is one I made for my merc group
Bravo Whisky Charlie.

It's kind of a tribute to the pilots of the F-105s and F-4s of the 60/70s that flew ECM aircraft to confuse enemy surface to air batteries so their brothers could get through to their objectives. They were called Wild Weasels...

Therefore, I present the BWC Wild Weasel (I'm also kind of a fan of nose art)



Have fun and good hunting.

Hammer07 Out

The only criticism I've have of this is that some of your red around the cockpit seem just a little too brilliant, as if they are emitting light rather than just reflecting. I'd desaturate them slightly so they match better with the slightly duller reds around the hip and ankle joints.

Besides that, it looks great. I love the idea of the thin red lines edging the armour plates and the nose art is really well executed. Good job!

[Ironhawk]

To Alex Iglesias: love your new JM. You impress me with your designs every time a new 'Mech come out. They are just a pleasure to work with here... (imagine in-game!) Sorry about not posting timely repaints when a new 'Mech concept comes out though; crazy busy these days. I promise I will make JM repaints within a week or so.

[Januph]

Beautiful camo job, this is up my alley. Pink and/or purple IMO should never touch a mech, unless it's melee'ing it.
Also no cockpit seperate colour schemes, just asking for it.

Edited by Januph, 04 July 2012 - 07:42 PM.

[Hayden]

Januph, on 04 July 2012 - 07:39 PM, said:

Beautiful camo job, this is up my alley. Pink and/or purple IMO should never touch a mech, unless it's melee'ing it.
Also no cockpit seperate colour schemes, just asking for it.

Thanks, glad you like it. When I do repaints I do try to stick to canonical designs, and the Chesterton Reserves just happen to be blessed with a very serious woodland scheme.

[Rychard Starheart]

(background isnt mine. no way in hell I can draw/paint that well).

Edited by Rychard Starheart, 05 July 2012 - 03:01 PM.

[Blackfang]

Rychard Starheart, on 04 July 2012 - 11:15 PM, said:

ok, been workin on this for.... idk. most of the day.


(background isnt mine. no way in hell I can draw/paint that well).

only part im really not happy with are the missiles.

LOL that looks like a war torn London, UK, houses of parliament next to the thames with big ben the clock tower.

[Nacon]

Got my Raven done. Same "Bare Metal" theme again.

Edited by Nacon, 05 July 2012 - 05:14 AM.