372 replies to this topic

[M4jk]

Hello Panda,Could you allow the terrantitans site for users from Czech rep, please? I want to try to get more Fps from my Lenovo work laptop (NVS 4200m SH*T ( ), but it tells that users from Czech republic are not allowed to get there ...
Thanks in advance and thank you for your effort!
Edit: now it works, thank you for quick reaction if you did something with it

Edited by M4jk, 09 May 2013 - 03:50 AM.

[Corvus Antaka]

M4jk, on 09 May 2013 - 03:40 AM, said:

Hello Panda,Could you allow the terrantitans site for users from Czech rep, please? I want to try to get more Fps from my Lenovo work laptop (NVS 4200m SH*T ( ), but it tells that users from Czech republic are not allowed to get there ...
Thanks in advance and thank you for your effort!
Edit: now it works, thank you for quick reaction if you did something with it

We sadly had to block a large amount of countries and users due to hackers attacking my servers from Russia/Czech republic, etc. Some IP's forwarded to the FBI for investigation, some from USA even. You can email me at info@terrantitans.com to request a ban removal if you can not access the website.

On a side note, anyone who has been attempting to take down my sites or hack them should be a careful little monkey. I've been around a long time.

[Durant Carlyle]

You don't like e_ShadowsPoolSize and e_TerrainTextureStreamingPoolItemsNum any more?

Leaving the Shadows one at 2048 and increasing the Terrain one to 2048 (from 256) works for me.

I also changed e_TerrainDetailMaterialsViewDistZ to 256 (from 128). Don't really know why -- I have no idea what it does. lol

Didn't these three work? I see you totally removed them:

r_TexturesStreamPoolSize = 512
r_Sharpening = 0
r_ChromaticAberration = 1.5

[Corvus Antaka]

Durant Carlyle, on 09 May 2013 - 10:29 AM, said:

You don't like e_ShadowsPoolSize and e_TerrainTextureStreamingPoolItemsNum any more?

Leaving the Shadows one at 2048 and increasing the Terrain one to 2048 (from 256) works for me.

I also changed e_TerrainDetailMaterialsViewDistZ to 256 (from 128). Don't really know why -- I have no idea what it does. lol

Didn't these three work? I see you totally removed them:

r_TexturesStreamPoolSize = 512
r_Sharpening = 0
r_ChromaticAberration = 1.5

i didnt notice much graphical improvement and it did have some stability issues. the last one i posted gives great graphics and has onnly hardlocked once in 40 battles of testing.

[Corvus Antaka]

This user.cfg for high-end rigs is maxed for graphics quality and has given me 100 matches without a single crash to date since the HUD fix & Memory leak bug fixes from PGI the last 2 weeks.

Spoiler

;Field of View inside Cockpit (Default:75)
cl_fov = 85
;Mouse Options
i_mouse_smooth = 0
i_mouse_accel=0
;mouse speed (working - 0.1 - windows mouse at 6 notch, 1200 dpi mouse raise/lower as needed)
cl_sensitivity = 0.1
r_ColorGrading = 0
r_DepthOfField = 0
r_GlowAnamorphicFlares = 1
r_HDRBloomMul = 0.6
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.75
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6
r_HDREyeAdaptionCache = 0
r_HDRGrainAmount = 0
r_HDRLevel = 3
r_HDROffset = 10
r_HDRRendering = 1
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 100
r_PostProcessHUD3DCache = 0
r_RainMaxViewDist_Deferred = 100
r_Sunshafts = 1
q_Renderer = 4
q_ShaderFX = 4
q_ShaderGeneral = 4
q_ShaderGlass = 4
q_ShaderHDR = 4
q_ShaderIce = 4
q_ShaderMetal = 4
q_ShaderPostProcess = 4
q_ShaderShadow = 4
q_ShaderSky = 4
q_ShaderTerrain = 4
q_ShaderVegetation = 4
e_Shadows = 1
e_GsmCache = 0
e_GsmLodsNum = 5
e_GsmRange = 3
e_ParticlesShadows = 1
e_ShadowsCastViewDistRatio = 1
e_ShadowsMaxTexRes = 1024
e_ShadowsOnAlphaBlend = 0
e_ShadowsResScale = 4.0
r_ShadowBlur = 2
r_ShadowJittering = 2.5
r_ShadowsPCFiltering = 1
r_ShadowsUseClipVolume = 1
r_FogShadows = 1

s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1
e_WaterOceanFFT = 1
e_WaterTessellationAmount = 10
e_WaterTessellationAmountX = 85
e_WaterTessellationAmountY = 85
e_WaterTessellationSwathWidth = 10
r_WaterCaustics = 1
r_WaterReflections = 1
r_WaterReflectionsQuality = 5
r_WaterReflectionsMinVisiblePixelsUpdate = 0.05
r_WaterTessellationHW = 1
r_WaterUpdateDistance = 0.2
r_WaterUpdateFactor = 0.05
e_DynamicLightsMaxEntityLights = 32
e_GI = 1
e_GIAmount = 0.6
e_GINumCascades = 1
e_GIMaxDistance = 100
e_SkyType = 1
e_SkyUpdateRate = 1
e_TerrainAo = 1
e_TerrainNormalMap = 1
e_VegetationUseTerrainColor = 1
r_DetailDistance = 8
r_DetailTextures = 1
r_ssdo = 1
r_SSDOAmount = 0.8
r_SSDOAmbientAmount = 1.1
r_SSAO = 0
r_SSAOQuality = 3
r_SSAODownscale = 0
r_refraction = 1
r_SSReflections = 3
r_Beams = 3
r_BeamsDistFactor = 0.01
r_BeamsMaxSlices = 300
e_Clouds = 1
r_CloudsUpdateAlways = 1
r_Reflections = 1
e_GsmRangeStep = 4
sys_spec_Quality=4
e_GsmCastFromTerrain = 1

i_lighteffects = 1
g_ragdollMinTime = 15
g_ragdollUnseenTime = 3
g_ragdollDistance = 40
e_ObjQuality = 4
e_DecalsAllowGameDecals = 1
e_DecalsLifeTimeScale = 2
e_DecalsOverlapping = 1
e_Dissolve = 2
e_LodRatio = 40
e_Lods = 1
e_LodMin = 0
e_MaxViewDistSpecLerp = 1
e_OcclusionCullingViewDistRatio = 1
e_ProcVegetation = 1
e_streamCgf = 0
e_VegetationBending = 1
e_VegetationMinSize = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1.5
e_ViewDistMin = 10
e_ViewDistRatio = 100
e_ViewDistRatioCustom = 100
e_ViewDistRatioDetail = 100
e_ViewDistRatioLights = 100
e_ViewDistRatioVegetation = 100
e_TerrainDetailMaterialsViewDistXY = 2048
e_TerrainDetailMaterialsViewDistZ = 128
e_TerrainOcclusionCullingMaxDist = 200
ca_AttachmentCullingRation = 300
ca_DrawFaceAttachments = 1
ca_useDecals = 1
es_DebrisLifetimeScale = 1
i_rejecteffects = 1
e_Tessellation = 1
e_DecalsForceDeferred = 1
r_DrawNearZRange = 0.08
e_ParticlesQuality = 4
e_ParticlesLights = 1
e_ParticlesMaxScreenFill = 160
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 1
e_ParticlesObjectCollisions = 2
r_UseParticlesHalfRes = 0
r_UseSoftParticles = 2
g_breakage_particles_limit = 160
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0
e_CullVegActivation = 50
e_FoliageWindActivationDist = 25
e_PhysFoliage = 2
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 6000
p_max_object_splashes = 3
p_max_substeps_large_group = 5
p_num_bodies_large_group = 100
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 4
es_MaxPhysDist = 200
es_MaxPhysDistInvisible = 25
r_DynTexAtlasCloudsMaxSize = 128
r_DynTexAtlasSpritesMaxSize = 128
r_DynTexMaxSize = 80
r_EnvCMResolution = 2
r_EnvTexResolution = 3
r_EnvTexUpdateInterval = 0.001
r_ImposterRatio = 1
r_TexSkyResolution = 0
r_TexAtlasSize = 2048
r_TexMinAnisotropy = 8
r_TexBumpResolution = 0
r_TexResolution = 0
r_TexturesStreaming = 0
r_VegetationSpritesTexRes = 256

e_CoverageBufferReproj = 0

[Captain Stiffy]

I used this and it totally narfed my perfectly tuned mouse settings

How do I undo that.. removing the settings from the file did not undo it

The speed is extremely very very slow now... I had it lower than most people before but now it is unusable unless I change my DPI and other **** and that's very annoying

Edit: TAKE MOUSE SETTINGS CHANGES OUT OF THIS ENTIRELY!!! WHAT THE HELL IS WRONG WITH YOU!?!?

Edited by Captain Stiffy, 17 May 2013 - 09:55 PM.

[wayoout]

Did they turn off user.cfg again with this patch? No matter what I am doing I can't get it to use the settings.

[flaser]

Captain Stiffy, on 17 May 2013 - 09:52 PM, said:

I used this and it totally narfed my perfectly tuned mouse settings

How do I undo that.. removing the settings from the file did not undo it

The speed is extremely very very slow now... I had it lower than most people before but now it is unusable unless I change my DPI and other **** and that's very annoying

Edit: TAKE MOUSE SETTINGS CHANGES OUT OF THIS ENTIRELY!!! WHAT THE HELL IS WRONG WITH YOU!?!?

Dear user, please correct your tone, Panda is doing great work for the community for free, you have no grounds to whine like a petulant child and make demands.

The mouse changes have been part of the circulated user.cfg files since, practically forever. If you actually took the 12 seconds it took to write your complaint you could've figured out how to tweak things to your liking, the instructions are pretty clear.

Edited by flaser, 23 May 2013 - 06:46 AM.

[Corvus Antaka]

Captain Stiffy, on 17 May 2013 - 09:52 PM, said:

I used this and it totally narfed my perfectly tuned mouse settings

How do I undo that.. removing the settings from the file did not undo it

The speed is extremely very very slow now... I had it lower than most people before but now it is unusable unless I change my DPI and other **** and that's very annoying

Edit: TAKE MOUSE SETTINGS CHANGES OUT OF THIS ENTIRELY!!! WHAT THE HELL IS WRONG WITH YOU!?!?

lol

lol

LOL!!!

wayoout, on 21 May 2013 - 02:40 PM, said:

Did they turn off user.cfg again with this patch? No matter what I am doing I can't get it to use the settings.

you might have to recheck the install routine.

[DeerSpotter]

easy fix, http://mwomercs.com/...ability-issues/

[Corvus Antaka]

Current high end user.cfg file. removed mouse settings since those are now included in game options. FOV default is 75 if you prefer the stock FOV. use 85 on 1080p widescreens it looks great.

Otherwise pretty standard stuff in here, terrain shadows are turned on, vegetation detail is maxed as is laser and beam detail, cloudes, flares, etc.

this runs a rock solid 50-60 FPS on a 3570K 16GB RAM, SSD and HD 7870

Spoiler

;Field of View inside Cockpit (Default:75)
cl_fov = 85
r_ColorGrading = 0
r_DepthOfField = 0
r_GlowAnamorphicFlares = 1
r_HDRBloomMul = 0.6
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.75
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6
r_HDREyeAdaptionCache = 0
r_HDRGrainAmount = 0
r_HDRLevel = 3
r_HDROffset = 10
r_HDRRendering = 1
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 100
r_PostProcessHUD3DCache = 0
r_RainMaxViewDist_Deferred = 100
r_Sunshafts = 1
q_Renderer = 4
q_ShaderFX = 4
q_ShaderGeneral = 4
q_ShaderGlass = 4
q_ShaderHDR = 4
q_ShaderIce = 4
q_ShaderMetal = 4
q_ShaderPostProcess = 4
q_ShaderShadow = 4
q_ShaderSky = 4
q_ShaderTerrain = 4
q_ShaderVegetation = 4
e_Shadows = 1
e_GsmCache = 0
e_GsmLodsNum = 5
e_GsmRange = 3
e_ParticlesShadows = 1
e_ShadowsCastViewDistRatio = 1
e_ShadowsMaxTexRes = 1024
e_ShadowsOnAlphaBlend = 0
e_ShadowsResScale = 4.0
r_ShadowBlur = 2
r_ShadowJittering = 2.5
r_ShadowsPCFiltering = 1
r_ShadowsUseClipVolume = 1
r_FogShadows = 1

s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1
e_WaterOceanFFT = 1
e_WaterTessellationAmount = 10
e_WaterTessellationAmountX = 85
e_WaterTessellationAmountY = 85
e_WaterTessellationSwathWidth = 10
r_WaterCaustics = 1
r_WaterReflections = 1
r_WaterReflectionsQuality = 5
r_WaterReflectionsMinVisiblePixelsUpdate = 0.05
r_WaterTessellationHW = 1
r_WaterUpdateDistance = 0.2
r_WaterUpdateFactor = 0.05
e_DynamicLightsMaxEntityLights = 32
e_GI = 1
e_GIAmount = 0.6
e_GINumCascades = 1
e_GIMaxDistance = 100
e_SkyType = 1
e_SkyUpdateRate = 1
e_TerrainAo = 1
e_TerrainNormalMap = 1
e_VegetationUseTerrainColor = 1
r_DetailDistance = 8
r_DetailTextures = 1
r_ssdo = 1
r_SSDOAmount = 0.8
r_SSDOAmbientAmount = 1.1
r_SSAO = 0
r_SSAOQuality = 3
r_SSAODownscale = 0
r_refraction = 1
r_SSReflections = 3
r_Beams = 3
r_BeamsDistFactor = 0.01
r_BeamsMaxSlices = 300
e_Clouds = 1
r_CloudsUpdateAlways = 1
r_Reflections = 1
e_GsmRangeStep = 4
sys_spec_Quality=4
e_GsmCastFromTerrain = 1

i_lighteffects = 1
g_ragdollMinTime = 15
g_ragdollUnseenTime = 3
g_ragdollDistance = 40
e_ObjQuality = 4
e_DecalsAllowGameDecals = 1
e_DecalsLifeTimeScale = 2
e_DecalsOverlapping = 1
e_Dissolve = 2
e_LodRatio = 40
e_Lods = 1
e_LodMin = 0
e_MaxViewDistSpecLerp = 1
e_OcclusionCullingViewDistRatio = 1
e_ProcVegetation = 1
e_streamCgf = 0
e_VegetationBending = 1
e_VegetationMinSize = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1.5
e_ViewDistMin = 10
e_ViewDistRatio = 100
e_ViewDistRatioCustom = 100
e_ViewDistRatioDetail = 100
e_ViewDistRatioLights = 100
e_ViewDistRatioVegetation = 100
e_TerrainDetailMaterialsViewDistXY = 2048
e_TerrainDetailMaterialsViewDistZ = 128
e_TerrainOcclusionCullingMaxDist = 200
ca_AttachmentCullingRation = 300
ca_DrawFaceAttachments = 1
ca_useDecals = 1
es_DebrisLifetimeScale = 1
i_rejecteffects = 1
e_Tessellation = 1
e_DecalsForceDeferred = 1
r_DrawNearZRange = 0.08
e_ParticlesQuality = 4
e_ParticlesLights = 1
e_ParticlesMaxScreenFill = 160
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 1
e_ParticlesObjectCollisions = 2
r_UseParticlesHalfRes = 0
r_UseSoftParticles = 2
g_breakage_particles_limit = 160
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0
e_CullVegActivation = 50
e_FoliageWindActivationDist = 25
e_PhysFoliage = 2
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 6000
p_max_object_splashes = 3
p_max_substeps_large_group = 5
p_num_bodies_large_group = 100
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 4
es_MaxPhysDist = 200
es_MaxPhysDistInvisible = 25
r_DynTexAtlasCloudsMaxSize = 128
r_DynTexAtlasSpritesMaxSize = 128
r_DynTexMaxSize = 80
r_EnvCMResolution = 2
r_EnvTexResolution = 3
r_EnvTexUpdateInterval = 0.001
r_ImposterRatio = 1
r_TexSkyResolution = 0
r_TexAtlasSize = 2048
r_TexMinAnisotropy = 8
r_TexBumpResolution = 0
r_TexResolution = 0
r_TexturesStreaming = 0
r_VegetationSpritesTexRes = 256

Edited by Colonel Pada Vinson, 01 June 2013 - 02:20 AM.

[FuzzyLog1c]

Colonel, if you really want to make this useful, recommend you track the default values for each item you're tweaking. So, for example, if "v_vehicle_quality = 2" is the default and you want to use "v_vehicle_quality = 4," write:

"v_vehicle_quality = 4 --default is 2"

Or something similar.

Edited by FuzzyLog1c, 01 June 2013 - 05:18 AM.

[SgtFlex]

Hey Colonel

Question on the AA part of your read me file


"ANTI-ALIASING
to clean up any jaggy edges with an ATI/NVIDIA card set MSAA to 1 in attributes.xml
and in CCC set AA to enhance application settings, edge detect, adaptive multisampling or supersampling (your choice) and keep morpholical filtering off (causes text view/crispness issues)
add r_UseEdgeAA = 1 to user.cfg (anywhere you want)"

Could you please elaborate of this further for me? How do i add this to my Attributes.XML file?

Like so? : <Attr value="1"name="MSAA"/> ? (and im guessing i need an XML editor to do this as notepad seems to mess it up?

I have added the " r_UseEdgeAA = 1" But wondered if i could get better AA results still..

Also is there anyway to turn SLi support on? (I'm guessing not)

Edited by SgtFlex, 02 June 2013 - 02:33 AM.

[Corvus Antaka]

@ fuzzylogic - the defaults are in the archive http://terrantitans.com/mwo-user-cfg PGI default low/med/high/ultrahigh user.cfg's are in there to compare yourself

@sgtflex - AA isnt working properly in mwo right now. I'll update the settings in a few patches when AA is working again. for now just turn postAA on in options with custom user.cfg might work, you can try overriding with CC but that doesnt work for me right now.

[Corvus Antaka]

Visual difference between custom ultra high user.cfg with film grain removed and pgi ultra high settings.

custom user.cfg

Spoiler

PGI ultra high defaults

Spoiler

[Primetimex]

Is it just me or do the Ultra high detail makes MWO look very "murky" and "blurry"??? Referring to the screenshot from Col.Vinson.

For this reason I switched all the advanced details to LOW (or OFF) and only left object texture and environment is very high.

MWO is one game where having a high end PC can cause the game look murky, out of focus and blurry - enough of this - switch everything to LOW it gets back into focus and get on with MWO'ing!

[Corvus Antaka]

yeah the ultra high DoF effects/film grain & blur still do, hence posting this shot here, if you use my ultra high config you get the same top end graphics without the fuzz.

[Grey Ghost]

Colonel Pada Vinson, on 05 July 2013 - 03:57 AM, said:

yeah the ultra high DoF effects/film grain & blur still do, hence posting this shot here, if you use my ultra high config you get the same top end graphics without the fuzz.

That the one from post #89?

[Corvus Antaka]

this one. Sweetfx has been removed from the download at www.terrantitans.com/mwo-user-cfg due to TOS violations. the legal package is now complete and available for low-ultra-high settings from this download.

Spoiler

;Field of View inside Cockpit (Default:75)
cl_fov = 85
r_ColorGrading = 0
r_DepthOfField = 0
r_GlowAnamorphicFlares = 1
r_HDRBloomMul = 0.6
r_HDRBlueShift = 0
r_HDRBrightLevel = 0.75
r_HDRBrightOffset = 5
r_HDRBrightThreshold = 6
r_HDREyeAdaptionCache = 0
r_HDRGrainAmount = 0
r_HDRLevel = 3
r_HDROffset = 10
r_HDRRendering = 1
r_MotionBlur = 0
r_MotionBlurMaxViewDist = 100
r_PostProcessHUD3DCache = 0
r_RainMaxViewDist_Deferred = 100
r_Sunshafts = 1
q_Renderer = 4
q_ShaderFX = 4
q_ShaderGeneral = 4
q_ShaderGlass = 4
q_ShaderHDR = 4
q_ShaderIce = 4
q_ShaderMetal = 4
q_ShaderPostProcess = 4
q_ShaderShadow = 4
q_ShaderSky = 4
q_ShaderTerrain = 4
q_ShaderVegetation = 4
e_Shadows = 1
e_GsmCache = 0
e_GsmLodsNum = 5
e_GsmRange = 3
e_ParticlesShadows = 1
e_ShadowsCastViewDistRatio = 1
e_ShadowsMaxTexRes = 1024
e_ShadowsOnAlphaBlend = 0
e_ShadowsResScale = 4.0
r_ShadowBlur = 2
r_ShadowJittering = 2.5
r_ShadowsPCFiltering = 1
r_ShadowsUseClipVolume = 1
r_FogShadows = 1

s_MPEGDecoders = 32
s_Obstruction = 1
s_ObstructionAccuracy = 1
s_ObstructionUpdate = 0.1
s_SoundMoodsDSP = 1
s_VariationLimiter = 1
e_WaterOceanFFT = 1
e_WaterTessellationAmount = 10
e_WaterTessellationAmountX = 85
e_WaterTessellationAmountY = 85
e_WaterTessellationSwathWidth = 10
r_WaterCaustics = 1
r_WaterReflections = 1
r_WaterReflectionsQuality = 5
r_WaterReflectionsMinVisiblePixelsUpdate = 0.05
r_WaterTessellationHW = 1
r_WaterUpdateDistance = 0.2
r_WaterUpdateFactor = 0.05
e_DynamicLightsMaxEntityLights = 32
e_GI = 1
e_GIAmount = 0.6
e_GINumCascades = 1
e_GIMaxDistance = 100
e_SkyType = 1
e_SkyUpdateRate = 1
e_TerrainAo = 1
e_TerrainNormalMap = 1
e_VegetationUseTerrainColor = 1
r_DetailDistance = 8
r_DetailTextures = 1
r_ssdo = 1
r_SSDOAmount = 0.8
r_SSDOAmbientAmount = 1.1
r_SSAO = 0
r_SSAOQuality = 3
r_SSAODownscale = 0
r_refraction = 1
r_SSReflections = 3
r_Beams = 3
r_BeamsDistFactor = 0.01
r_BeamsMaxSlices = 300
e_Clouds = 1
r_CloudsUpdateAlways = 1
r_Reflections = 1
e_GsmRangeStep = 4
sys_spec_Quality=4
e_GsmCastFromTerrain = 1

i_lighteffects = 1
g_ragdollMinTime = 15
g_ragdollUnseenTime = 3
g_ragdollDistance = 40
e_ObjQuality = 4
e_DecalsAllowGameDecals = 1
e_DecalsLifeTimeScale = 2
e_DecalsOverlapping = 1
e_Dissolve = 2
e_LodRatio = 40
e_Lods = 1
e_LodMin = 0
e_MaxViewDistSpecLerp = 1
e_OcclusionCullingViewDistRatio = 1
e_ProcVegetation = 1
e_streamCgf = 0
e_VegetationBending = 1
e_VegetationMinSize = 0
e_VegetationSpritesDistanceCustomRatioMin = 1
e_VegetationSpritesDistanceRatio = 1.5
e_ViewDistMin = 10
e_ViewDistRatio = 100
e_ViewDistRatioCustom = 100
e_ViewDistRatioDetail = 100
e_ViewDistRatioLights = 100
e_ViewDistRatioVegetation = 100
e_TerrainDetailMaterialsViewDistXY = 2048
e_TerrainDetailMaterialsViewDistZ = 128
e_TerrainOcclusionCullingMaxDist = 200
ca_AttachmentCullingRation = 300
ca_DrawFaceAttachments = 1
ca_useDecals = 1
es_DebrisLifetimeScale = 1
i_rejecteffects = 1
e_Tessellation = 1
e_DecalsForceDeferred = 1
r_DrawNearZRange = 0.08
e_ParticlesQuality = 4
e_ParticlesLights = 1
e_ParticlesMaxScreenFill = 160
e_ParticlesMinDrawPixels = 1
e_ParticlesMotionBlur = 1
e_ParticlesObjectCollisions = 2
r_UseParticlesHalfRes = 0
r_UseSoftParticles = 2
g_breakage_particles_limit = 160
g_joint_breaking = 1
g_tree_cut_reuse_dist = 0
e_CullVegActivation = 50
e_FoliageWindActivationDist = 25
e_PhysFoliage = 2
e_PhysOceanCell = 0.5
p_gravity_z = -36.3
p_joint_damage_accum = 2
p_joint_damage_accum_threshold = 0.2
p_max_MC_iters = 6000
p_max_object_splashes = 3
p_max_substeps_large_group = 5
p_num_bodies_large_group = 100
p_splash_dist0 = 7
p_splash_dist1 = 30
p_splash_force0 = 10
p_splash_force1 = 100
p_splash_vel0 = 4.5
p_splash_vel1 = 10
v_vehicle_quality = 4
es_MaxPhysDist = 200
es_MaxPhysDistInvisible = 25
r_DynTexAtlasCloudsMaxSize = 128
r_DynTexAtlasSpritesMaxSize = 128
r_DynTexMaxSize = 80
r_EnvCMResolution = 2
r_EnvTexResolution = 3
r_EnvTexUpdateInterval = 0.001
r_ImposterRatio = 1
r_TexSkyResolution = 0
r_TexAtlasSize = 2048
r_TexMinAnisotropy = 8
r_TexBumpResolution = 0
r_TexResolution = 0
r_TexturesStreaming = 0
r_VegetationSpritesTexRes = 256

EDIT: the screenshots posted above do not contain sweetfx changes, only the ultra high user.cfg settings.

Edited by Colonel Pada Vinson, 11 July 2013 - 01:00 PM.

[FreakZero]

I'm getting a strange effect with motion blur, when I rotate the mech in the mechlab it looks as if it's vibrating and gives it a blurred effect that's very odd. Is there a way to fix this or a way to turn the motion blur off completely?