#101
Posted 19 November 2020 - 09:10 PM
#102
Posted 19 November 2020 - 10:53 PM
Templar
Sunder
longbow
and a must add mech is this one
the hellhound (Conjurer)- the mw4 merceneries model-
Edited by Dregian Bloodwrath, 19 November 2020 - 11:47 PM.
#103
Posted 19 November 2020 - 10:56 PM
GentleMouse, on 19 November 2020 - 09:10 PM, said:
hollander?
#104
Posted 20 November 2020 - 01:14 AM
For example: the Timber Wolf had the missile pods as separate parts with their own hitboxes.
It would make the Timber wolf & MadCat II playable with their big missile pods, and could actually make the Blood Asp a bit more fun to play.
Just a sugestion, and i know it would be difficult to implement, but i would like it to float around at least.
#105
Posted 20 November 2020 - 01:29 AM
chromanim, on 20 November 2020 - 01:14 AM, said:
For example: the Timber Wolf had the missile pods as separate parts with their own hitboxes.
It would make the Timber wolf & MadCat II playable with their big missile pods, and could actually make the Blood Asp a bit more fun to play.
Just a sugestion, and i know it would be difficult to implement, but i would like it to float around at least.
Thats actually not a bad idea i agree if possible it should be added
#106
Posted 20 November 2020 - 04:55 AM
Dregian Bloodwrath, on 20 November 2020 - 01:29 AM, said:
would be interesting if certain boxes were tied directly to hardpoints. so you can still rack the timbies but without destroying the torso.
#107
Posted 20 November 2020 - 11:09 AM
#108
Posted 20 November 2020 - 05:59 PM
However, if PGI does decide to make new mechs I recommend starting by matching what Catalyst issued with their recent Kickstarter. They have 12 Clan, 8 ComStar and 5 IS 'Mechs that are not in MWO.
Rescale 'Mechs - This was also in "Features", so I will copy my comments from there to here.
I love how 'Mechs are scaled to their tonnage - some are wider but shorter, some are tall and skinny. Every 'Mech of the same tonnage has the same volume.
At least in theory. There seems to be a lot of odd scaling choices. The 35t Firestarter looks at least three-times the size of the 20t Locust. There are many other examples. The only scaling change I'd like to see is an audit to confirm the current scales are correct.
Fix Mech Mobility (Desync) - Many people seem to forget the original reason for Desync - Clan 'Mechs had too much of an advantage. Their weapons and equipment weighs less than IS, so (non-OmniMech) Clan 'Mechs can fit larger engines that provide greater mobility advantage.
If we want to associate mobility with engine size (which kind of makes sense) give STD engines more mobility than same rated LFE and XL engines. STDs have the greatest mobility while LFEs have 80% of STD mobility and XLs have 60% of STD mobility.
Update Bolt-Ons - I don't use bolt-ons, so I don't care at all. If this is cheap and does not disguise 'Mech hit boxes, go for it.
Quirks / Set of 8's for Under Performers - I'm not a fan of well-thought-but-in-the-end-arbitrary quirks. I prefer it when there are set rules, just like how BattleTech (and MWO) has rules for configuring 'Mechs.
For example, in MWO weapon hard points that are higher on the 'Mech have an advantage. So perhaps the lower a hard point is, the higher its quirks could be. Other variables could be number of hard points, mix of hard points (energy, ballistic or missile) and things like that.
Bottom line - develop a formula to apply quirks rather than the opinion of players or PGI.
Armor Balance for Arm Weapon-Only 'Mechs - This is hard, but I understand the request. You could give them damage reduction (like closed missile bay doors) but then everyone will want something like that on their favorite 'Mechs.
So long as MWO maintains a hit-what-you-aim-at system, I don't have any suggestions.
Weapon Balance Pass - I was going to put these in "New Features", but this thread is good enough.
Minimum Range Penalties - LRMs, Rocket Launchers, PPCs and ATMs have minimum range penalties. In BattleTech Table Top other weapons also have minimum ranges: AC/2s, AC/5s, Gauss Rifles. These should also have reduced damage when used close range.
IS Omnimechs / Engine Discussion - don't care
Other
Cockpit shake - if a weapon adds impulse (shake) to a target, it should add impulse to the firing 'Mech ( like how firing 2 Heavy Gauss does). The "Improved Gyro" Skill Tree node could reduce this.
Speed should depend on equipped tonnage. If I only put 50t of equipment on my Atlas, it should move faster than a 100t Atlas with the same engine.
Reduce each 'Mech chassis engine options to 3-4 ratings. This will help differentiate 'Mechs of similar tonnage.
Have all 'Mechs been updated with the Civil War weapon art?
#109
Posted 20 November 2020 - 07:22 PM
Turkina
Sunder
Other IS Omnis
For the whole IS XL Omni thing I’ll reiterate what I used to say back in the day.... if you know the Mech is locked into a specific type of engine, then it is easier to balance around it because there is one less variable. So an Assault mech that has a large XL engine should have buffed mobility and buffed side torso durability to give it a bit more staying power. We can do it!
#110
Posted 20 November 2020 - 07:23 PM
#111
Posted 20 November 2020 - 08:36 PM
#112
Posted 20 November 2020 - 09:38 PM
Gas Guzzler, on 20 November 2020 - 07:22 PM, said:
Turkina
Sunder
Other IS Omnis
For the whole IS XL Omni thing I’ll reiterate what I used to say back in the day.... if you know the Mech is locked into a specific type of engine, then it is easier to balance around it because there is one less variable. So an Assault mech that has a large XL engine should have buffed mobility and buffed side torso durability to give it a bit more staying power. We can do it!
this.
another idea i had was to move 2 of the st crits to the ct on some (not all) mechs. you couldn't have any ct hardpoints, the engine might be easier to crit through the ct and st loss penalties would also be more severe than lfe.
Edited by LordNothing, 20 November 2020 - 09:46 PM.
#113
Posted 20 November 2020 - 10:28 PM
LordNothing, on 20 November 2020 - 09:38 PM, said:
this.
another idea i had was to move 2 of the st crits to the ct on some (not all) mechs. you couldn't have any ct hardpoints, the engine might be easier to crit through the ct and st loss penalties would also be more severe than lfe.
Why? Why make this more complicated than it has to be? XL causing insta-ded on an ST loss is only an issue if the 'Mech isn't offering some advantage to offset that drawback. Since you know the 'Mech will have an XL, make it hyper deadly for the time it has while being alive. Done, no exceptions to the mechanics necessary.
#114
Posted 21 November 2020 - 02:27 AM
Daeron Katz, on 16 November 2020 - 01:05 PM, said:
Just get rid of sets of 8 bonuses and give good quirks to bad omnipods. These robots are called OMNImechs for a reason. Don't try to trick players into using particular sets, just make all omnipods equally valuable. If you want to reward players for using "lore-friendly" stock configs then just give omnipods quirks that work best with stock config. Having a set bonus only makes things more confusing.
Daeron Katz, on 16 November 2020 - 01:05 PM, said:
I'd like to have IS omnis but there's decent bunch of non-light mechs with XL engine which is a huge problem. Especially when everyone would know that mech is using XL so shooting ST is not a gamble anymore.
Also, IS Omni would be a good choice for "community-curated" mech because there isn't a whole lot of them in the lore.
Miss Greene, on 20 November 2020 - 10:28 PM, said:
There was an advantage in the form of extra mobility provided by higher engine rating before decoupling. Having XL omnifatties turn/accel/decel very fast compared to non-omnies of same tonnage and engine rating would help to offset XL vulnerability.
Edited by Appuagab, 21 November 2020 - 02:35 AM.
#115
Posted 21 November 2020 - 03:36 AM
Miss Greene, on 20 November 2020 - 10:28 PM, said:
Why? Why make this more complicated than it has to be? XL causing insta-ded on an ST loss is only an issue if the 'Mech isn't offering some advantage to offset that drawback. Since you know the 'Mech will have an XL, make it hyper deadly for the time it has while being alive. Done, no exceptions to the mechanics necessary.
How about massive weapon cooldown, weapon heat, structure & armor quirks for the IS Omnis that can further buffed with skill nodes?
Some Omnis like the Sunder and Avatar could be used as fast firing LRM platform hiding behind cover while tearing the enemy appart.
#116
Posted 21 November 2020 - 05:48 AM
#117
Posted 21 November 2020 - 06:36 AM
Disagreeable Unconstructiveness, on 21 November 2020 - 05:48 AM, said:
The original design basically dictates horrid hitboxes. I don't see how PGI fixes that without completely tossing out the fafnir's original design, which will upset a lot of people. Try an Annihilator.
#118
Posted 21 November 2020 - 07:10 AM
GentleMouse, on 19 November 2020 - 09:10 PM, said:
i agree with this in the broadest way possible. i want to see underperformers have rediculous weapons quirks. bring back the super energy quirk on that 1 locust. it had something like 25% cooldown on energy weapons. that was fun and gave you a reason to buy mechs that werent "meta". some possibilities off the top of my head: 20%ac cooldown on hunchbacks, 15% lpl cooldown on wolverines, 10%ml cooldown on pheonix hawk. just fun stuff on all the mechs that no ones too scared of. rule of thumb for choosing what to superquirk, if everyone whos been playing for a long time knows how to instantly gimp a build by focusing 1 component, the geo is completely horrendous, or both arms being taken off nullifies the mech, superquirk it.
key point, im not saying to do this to actually "good" mechs, just the ones that are outdated. dont super quirk the mad2c-b for example
#119
Posted 21 November 2020 - 07:51 AM
Appuagab, on 21 November 2020 - 02:27 AM, said:
That was never a sufficient advantage in and of itself. You needed a large engine relative to mass, which wasn't available on every 'Mech, and even then those big-engine 'Mechs still got mega quirks to put them in a good place.
Edited by Miss Greene, 21 November 2020 - 07:51 AM.
#120
Posted 21 November 2020 - 09:01 AM
Take an old chassis that you own, with like 2 hardpoints, then give it a more modern refit?
The kits could cost cash or MC or whatever, and on special occasion it could be a reward or a C-Bill sale, but it would essentially allow you to refit a single outdated chassis (which you already own) to be more competitive that the old "bone stock".
Think of it as, I buy a 67 corvette.. new engine, new tranny, new suspension... old chassis, new hotness..
I buy an old Spider... I buy a refit kit.... new engine, new hardpoints.. old chassis, new hotness..
10 user(s) are reading this topic
0 members, 10 guests, 0 anonymous users